If a memset destination is overwritten by a memcpy and the sizes
are exactly the same, then the memset is simply dead. We can
directly drop it, instead of replacing it with a memset of zero
size, which is particularly ugly for the case of a dynamic size.
If the call is readnone, then there may not be any MemoryAccess
associated with the call. Bail out in that case.
This fixes the issue reported at
https://reviews.llvm.org/D94376#2578312.
This enables use of MemorySSA instead of MemDep in MemCpyOpt. To
allow this without significant compile-time impact, the MemCpyOpt
pass is moved directly before DSE (in the cases where this was not
already the case), which allows us to reuse the existing MemorySSA
analysis.
Unlike the MemDep-based implementation, the MemorySSA-based MemCpyOpt
can also perform simple optimizations across basic blocks.
Differential Revision: https://reviews.llvm.org/D94376
This is a straightforward port of MemCpyOpt to MemorySSA following
the approach of D26739. MemDep queries are replaced with MSSA queries
without changing the overall structure of the pass. Some care has
to be taken to account for differences between these APIs
(MemDep also returns reads, MSSA doesn't).
Differential Revision: https://reviews.llvm.org/D89207
When performing a call slot optimization to a GEP destination, it
will currently usually fail, because the GEP is directly before the
memcpy and as such does not dominate the call. We should move it
above the call if that satisfies the domination requirement.
I think that a constant-index GEP is the only useful thing to move
here, as otherwise isDereferenceablePointer couldn't look through
it anyway. As such I'm not trying to generalize this further.
Differential Revision: https://reviews.llvm.org/D89623
This adds an -enable-memcpyopt-memoryssa option that currently does
nothing apart from requiring MSSA as a dependency. The tests are
split to run both with the option disabled and enabled. I went with
this rather than the separate directory DSE uses, as I found it
convenient to have a direct side-by-side comparison of differences.
Differential Revision: https://reviews.llvm.org/D89206
moveUp() moves instructions, so we should move the corresponding
memory accesses as well. We should also move the store instruction
itself: Even though we'll end up removing it later, this gives us
a correct MemoryDef to replace.
The implementation is somewhat more complicated than it should be,
because we also handle the case where P does not have a memory
access due to a degnerate AA pipeline. Hopefully, the need for this
will go away in the future, when the rest of the pass is based on
MSSA.
Differential Revision: https://reviews.llvm.org/D88778
If the memcpy operands are the same (which is allowed since D86815)
then the memcpy is effectively a no-op and the partially overlapping
memset is not dead.
Differential Revision: https://reviews.llvm.org/D89192
MemCpyOpt can shorten a memset if it is later partially overwritten
by a memcpy. It checks that the destination is not read in between,
but we also need to make sure that the destination cannot be observed
via unwinding.
Differential Revision: https://reviews.llvm.org/D89190
MemCpyOpt can hoist stores while load+store pairs into memcpy.
This hoisting can currently result in stores being executed that
weren't guaranteed to execute in the original problem.
Differential Revision: https://reviews.llvm.org/D89154
The call slot optimization has some home-grown code for checking
whether the destination is dereferenceable. Replace this with the
generic isDereferenceableAndAlignedPointer() helper.
I'm not checking alignment here, because that is currently handled
separately and may be an enforced alignment for allocas. The clean
way of integrating that part would probably be to accept a callback
in isDereferenceableAndAlignedPointer() for the actual isAligned check,
which would then have a chance to use an enforced alignment instead.
This allows the destination to be a GEP (among other things), though
the two open TODOs may prevent it from working in practice.
Differential Revision: https://reviews.llvm.org/D88805
When performing call slot optimization for a non-local destination,
we need to check whether there may be throwing calls between the
call and the copy. Otherwise, the early write to the destination
may be observable by the caller.
This was already done for call slot optimization of load/store,
but not for memcpys. For the sake of clarity, I'm moving this check
into the common optimization function, even if that does need an
additional instruction scan for the load/store case.
As efriedma pointed out, this check is not sufficient due to
potential accesses from another thread. This case is left as a TODO.
Differential Revision: https://reviews.llvm.org/D88799
Next to erasing the instruction, we also always want to remove
it from MSSA and MD. Use a common function to do so.
This is a refactoring split out from D26739.
The removal of the cpy instruction is left to the caller of
performCallSlotOptzn(), including the invalidation of MD. Both
call-sites already do this.
Also handle incrementation of NumMemCpyInstr consistently at the
call-site. One of the call-site was already doing this, which
ended up incrementing the statistic twice.
This fix was part of D26739.
If we allow the non-integral pointers to become memset and memcpy, we loose the ability to reason about pointer propagation. This patch is modeled on changes we've carried downstream for a long time, figured it was worth being equally conservative for other users. There is room to refine the semantics and handling here if anyone is motivated.
This patch updates MemCpyOpt to preserve MemorySSA. It uses the
MemoryDef at the insertion point of the builder and inserts the new def
after that def.
In some cases, we just modify a memory instruction. In that case, get
the defining access, then remove the memory access and add a new one.
If the defining access is in a different block, insert a new def at the
beginning of the current block, otherwise after the defining access.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D86651
This is a followup to 1ccfb52a61, which made a number of changes
including the apparently innocuous reordering of required passes in
MemCpyOptimizer. This however altered the creation order of BasicAA vs
Phi Values analysis, meaning BasicAA did not pick up PhiValues as a
cached result. Instead if we require MemoryDependence first it will
require PhiValuesAnalysis allowing BasicAA to use it for better results.
I don't claim this is an excellent design, but it fixes a nasty little
regressions where a query later in JumpThreading was getting worse
results.
Differential Revision: https://reviews.llvm.org/D87027
Summary:
Analyses are preserved in MemCpyOptimizer.
Get analyses before running the pass and store the pointers, instead of
using lambdas and getting them every time on demand.
Reviewers: lenary, deadalnix, mehdi_amini, nikic, efriedma
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74494
Previously these functions either returned a "changed" flag or a "repeat
instruction" flag, and could also modify an iterator to control which
instruction would be processed next.
Simplify this by always returning a "changed" flag, and handling all of
the "repeat instruction" functionality by modifying the iterator.
No functional change intended except in this case:
// If the source and destination of the memcpy are the same, then zap it.
... where the previous code failed to process the instruction after the
zapped memcpy.
Differential Revision: https://reviews.llvm.org/D81540
If the caller needs to reponsible for making sure the MaybeAlign
has a value, then we should just make the caller convert it to an Align
with operator*.
I explicitly deleted the relational comparison operators that
were being inherited from Optional. It's unclear what the meaning
of two MaybeAligns were one is defined and the other isn't
should be. So make the caller reponsible for defining the behavior.
I left the ==/!= operators from Optional. But now that exposed a
weird quirk that ==/!= between Align and MaybeAlign required the
MaybeAlign to be defined. But now we use the operator== from
Optional that takes an Optional and the Value.
Differential Revision: https://reviews.llvm.org/D80455
Now that load/store alignment is required, we no longer need most
of them. Also switch the getLoadStoreAlignment() helper to return
Align instead of MaybeAlign.
Along the lines of D77454 and D79968. Unlike loads and stores, the
default alignment is getPrefTypeAlign, to match the existing handling in
various places, including SelectionDAG and InstCombine.
Differential Revision: https://reviews.llvm.org/D80044
There are also some adjustments to use MaybeAlign in here due
to CallBase::getParamAlignment() being deprecated. It would
be a little cleaner if getOrEnforceKnownAlignment was migrated
to Align/MaybeAlign.
Differential Revision: https://reviews.llvm.org/D78345
There are also some adjustments to use MaybeAlign in here due
to CallBase::getParamAlignment() being deprecated. It would
be cleaner if getOrEnforceKnownAlignment was migrated
to Align/MaybeAlign.
Differential Revision: https://reviews.llvm.org/D78345
Summary: This patch fixes https://bugs.llvm.org/show_bug.cgi?id=44388 which incorrectly assigns an ABI alignment to memset when there was no explicit alignment given.
Reviewers: gchatelet, lenary, nikic
Reviewed By: nikic
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74083
Summary:
This is a resubmit of D71473.
This patch introduces a set of functions to enable deprecation of IRBuilder functions without breaking out of tree clients.
Functions will be deprecated one by one and as in tree code is cleaned up.
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: aaron.ballman, courbet
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71547
Summary:
This patch introduces a set of functions to enable deprecation of IRBuilder functions without breaking out of tree clients.
Functions will be deprecated one by one and as in tree code is cleaned up.
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, jvesely, nhaehnle, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71473
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
Summary:
When MemCpyOpt is handling aggregate type values, if an instruction (let's call it P) between the targeting load (L) and store (S) clobbers the source pointer of L, it will try to hoist S before P. This process will also hoist S's data dependency instructions.
However, the current implementation has a bug that if one of S's dependency instructions is //also// a user of P, MemCpyOpt will not prevent it from being hoisted above P and cause a use-before-define error. For example, in the newly added test file (i.e. `aggregate-type-crash.ll`), it will try to hoist both `store %my_struct %1, %my_struct* %3` and its dependent, `%3 = bitcast i8* %2 to %my_struct*`, above `%2 = call i8* @my_malloc(%my_struct* %0)`. Creating the following BB:
```
entry:
%1 = bitcast i8* %4 to %my_struct*
%2 = bitcast %my_struct* %1 to i8*
%3 = bitcast %my_struct* %0 to i8*
call void @llvm.memcpy.p0i8.p0i8.i64(i8* align 4 %2, i8* align 4 %3, i64 8, i1 false)
%4 = call i8* @my_malloc(%my_struct* %0)
ret void
```
Where there is a use-before-define error between `%1` and `%4`.
Update: The compiler for the Pony Programming Language [also encounter the same bug](https://github.com/ponylang/ponyc/issues/3140)
Patch by Min-Yih Hsu (myhsu)
Reviewers: eugenis, pcc, dblaikie, dneilson, t.p.northover, lattner
Reviewed By: eugenis
Subscribers: lenary, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66060
llvm-svn: 375403
Summary:
This is the first change to enable the TLI to be built per-function so
that -fno-builtin* handling can be migrated to use function attributes.
See discussion on D61634 for background. This is an enabler for fixing
handling of these options for LTO, for example.
This change should not affect behavior, as the provided function is not
yet used to build a specifically per-function TLI, but rather enables
that migration.
Most of the changes were very mechanical, e.g. passing a Function to the
legacy analysis pass's getTLI interface, or in Module level cases,
adding a callback. This is similar to the way the per-function TTI
analysis works.
There was one place where we were looking for builtins but not in the
context of a specific function. See FindCXAAtExit in
lib/Transforms/IPO/GlobalOpt.cpp. I'm somewhat concerned my workaround
could provide the wrong behavior in some corner cases. Suggestions
welcome.
Reviewers: chandlerc, hfinkel
Subscribers: arsenm, dschuff, jvesely, nhaehnle, mehdi_amini, javed.absar, sbc100, jgravelle-google, eraman, aheejin, steven_wu, george.burgess.iv, dexonsmith, jfb, asbirlea, gchatelet, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66428
llvm-svn: 371284
Summary:
Simplify the API using Optional<> and address comments in
https://reviews.llvm.org/D66165
Reviewers: vitalybuka
Subscribers: hiraditya, llvm-commits, ostannard, pcc
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66317
llvm-svn: 369300
Summary:
We will need to handle IntToPtr which I will submit in a separate patch as it's
not going to be NFC.
Reviewers: eugenis, pcc
Reviewed By: eugenis
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D63940
llvm-svn: 365709
This cleans up all GetElementPtr creation in LLVM to explicitly pass a
value type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57173
llvm-svn: 352913
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
minted `CallBase` class instead of the `CallSite` wrapper.
This moves the largest interwoven collection of APIs that traffic in
`CallSite`s. While a handful of these could have been migrated with
a minorly more shallow migration by converting from a `CallSite` to
a `CallBase`, it hardly seemed worth it. Most of the APIs needed to
migrate together because of the complex interplay of AA APIs and the
fact that converting from a `CallBase` to a `CallSite` isn't free in its
current implementation.
Out of tree users of these APIs can fairly reliably migrate with some
combination of `.getInstruction()` on the `CallSite` instance and
casting the resulting pointer. The most generic form will look like `CS`
-> `cast_or_null<CallBase>(CS.getInstruction())` but in most cases there
is a more elegant migration. Hopefully, this migrates enough APIs for
users to fully move from `CallSite` to the base class. All of the
in-tree users were easily migrated in that fashion.
Thanks for the review from Saleem!
Differential Revision: https://reviews.llvm.org/D55641
llvm-svn: 350503
Trying to keep these patches super small so they're easily post-commit
verifiable, as requested in D44748.
srcSize is derived from the size of an alloca, and we quit out if the
size of that is > the size of the thing we're copying to. Hence, we
should always copy everything over, so these sizes are precise.
Don't make srcSize itself a LocationSize, since optionality isn't
helpful, and we do some comparisons against other sizes elsewhere in
that function.
llvm-svn: 350019
Instruction::isLifetimeStartOrEnd() checks whether an Instruction is an
llvm.lifetime.start or an llvm.lifetime.end intrinsic.
This was suggested as a cleanup in D55967.
Differential Revision: https://reviews.llvm.org/D56019
llvm-svn: 349964
The current llvm.mem.parallel_loop_access metadata has a problem in that
it uses LoopIDs. LoopID unfortunately is not loop identifier. It is
neither unique (there's even a regression test assigning the some LoopID
to multiple loops; can otherwise happen if passes such as LoopVersioning
make copies of entire loops) nor persistent (every time a property is
removed/added from a LoopID's MDNode, it will also receive a new LoopID;
this happens e.g. when calling Loop::setLoopAlreadyUnrolled()).
Since most loop transformation passes change the loop attributes (even
if it just to mark that a loop should not be processed again as
llvm.loop.isvectorized does, for the versioned and unversioned loop),
the parallel access information is lost for any subsequent pass.
This patch unlinks LoopIDs and parallel accesses.
llvm.mem.parallel_loop_access metadata on instruction is replaced by
llvm.access.group metadata. llvm.access.group points to a distinct
MDNode with no operands (avoiding the problem to ever need to add/remove
operands), called "access group". Alternatively, it can point to a list
of access groups. The LoopID then has an attribute
llvm.loop.parallel_accesses with all the access groups that are parallel
(no dependencies carries by this loop).
This intentionally avoid any kind of "ID". Loops that are clones/have
their attributes modifies retain the llvm.loop.parallel_accesses
attribute. Access instructions that a cloned point to the same access
group. It is not necessary for each access to have it's own "ID" MDNode,
but those memory access instructions with the same behavior can be
grouped together.
The behavior of llvm.mem.parallel_loop_access is not changed by this
patch, but should be considered deprecated.
Differential Revision: https://reviews.llvm.org/D52116
llvm-svn: 349725
Currently memcpyopt optimizes cases like
memset(a, byte, N);
memcpy(b, a, M);
to
memset(a, byte, N);
memset(b, byte, M);
if M <= N. Often this allows further simplifications down the line,
which drop the first memset entirely.
This patch extends this optimization for the case where M > N, but we
know that the bytes a[N..M] are undef due to alloca/lifetime.start.
This situation arises relatively often for Rust code, because Rust does
not initialize trailing structure padding and loves to insert redundant
memcpys. This also fixes https://bugs.llvm.org/show_bug.cgi?id=39844.
The previous version of this patch did not perform dependency checking
properly: While the dependency is checked at the position of the memset,
the used size must be that of the memcpy. Previously the size of the
memset was used, which missed modification in the region
MemSetSize..CopySize, resulting in miscompiles. The added tests cover
variations of this issue.
Differential Revision: https://reviews.llvm.org/D55120
llvm-svn: 349078
Currently memcpyopt optimizes cases like
memset(a, byte, N);
memcpy(b, a, M);
to
memset(a, byte, N);
memset(b, byte, M);
if M <= N. Often this allows further simplifications down the line,
which drop the first memset entirely.
This patch extends this optimization for the case where M > N, but we
know that the bytes a[N..M] are undef due to alloca/lifetime.start.
This situation arises relatively often for Rust code, because Rust does
not initialize trailing structure padding and loves to insert redundant
memcpys. This also fixes https://bugs.llvm.org/show_bug.cgi?id=39844.
For the implementation, I'm reusing a bit of code for a similar existing
optimization (direct memcpy of undef). I've also added memset support to
MemDepAnalysis GetLocation -- Instead, getPointerDependencyFrom could be
used, but it seems to make more sense to add this to GetLocation and thus
make the computation cachable.
Differential Revision: https://reviews.llvm.org/D55120
llvm-svn: 348645
Summary:
his code was in CGDecl.cpp and really belongs in LLVM's isBytewiseValue. Teach isBytewiseValue the tricks clang's isRepeatedBytePattern had, including merging undef properly, and recursing on more types.
clang part of this patch: D51752
Subscribers: dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D51751
llvm-svn: 342709
This is a bit awkward in a handful of places where we didn't even have
an instruction and now we have to see if we can build one. But on the
whole, this seems like a win and at worst a reasonable cost for removing
`TerminatorInst`.
All of this is part of the removal of `TerminatorInst` from the
`Instruction` type hierarchy.
llvm-svn: 340701
This patch makes the DoesKMove argument non-optional, to force people
to think about it. Most cases where it is false are either code hoisting
or code sinking, where we pick one instruction from a set of
equal instructions among different code paths.
Reviewers: dberlin, nlopes, efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D47475
llvm-svn: 340606
Review feedback from r328165. Split out just the one function from the
file that's used by Analysis. (As chandlerc pointed out, the original
change only moved the header and not the implementation anyway - which
was fine for the one function that was used (since it's a
template/inlined in the header) but not in general)
llvm-svn: 333954
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
Summary:
Skip basic blocks not reachable from the entry node
in MemCpyOptPass::iterateOnFunction.
Code that is unreachable may have properties that do not exist
for reachable code (an instruction in a basic block can for
example be dominated by a later instruction in the same basic
block, for example if there is a single block loop).
MemCpyOptPass::processStore is only safe to use for reachable
basic blocks, since it may iterate past the basic block
beginning when used for unreachable blocks. By simply skipping
to optimize unreachable basic blocks we can avoid asserts such
as "Assertion `!NodePtr->isKnownSentinel()' failed."
in MemCpyOptPass::processStore.
The problem was detected by fuzz tests.
Reviewers: eli.friedman, dneilson, efriedma
Reviewed By: efriedma
Subscribers: efriedma, llvm-commits
Differential Revision: https://reviews.llvm.org/D45889
llvm-svn: 330635
Remove #include of Transforms/Scalar.h from Transform/Utils to fix layering.
Transforms depends on Transforms/Utils, not the other way around. So
remove the header and the "createStripGCRelocatesPass" function
declaration (& definition) that is unused and motivated this dependency.
Move Transforms/Utils/Local.h into Analysis because it's used by
Analysis/MemoryBuiltins.cpp.
llvm-svn: 328165
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the
MemCpyOpt pass to cease using:
1) The old getAlignment() API of MemoryIntrinsic in favour of getting source & dest specific
alignments through the new API.
2) The old IRBuilder CreateMemCpy/CreateMemMove single-alignment APIs in favour of the new
API that allows setting source and destination alignments independently.
We also add a few tests to fill gaps in the testing of this pass.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886, rL323891, rL324148, rL324273, rL324278,
rL324384, rL324395, rL324402, rL324626, rL324642, rL324653, rL324654, rL324773, rL324774,
rL324781, rL324784, rL324955, rL324960, rL325816, rL327398, rL327421 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
llvm-svn: 328097
This reverts r321138. It seems there are still underlying issues with
memdep. PR35519 seems to still be present if debug info is enabled. We
end up losing a memcpy. Somehow during store to memset merging, we
insert the memset after the memcpy or fail to update the memdep analysis
to account for the newly inserted memset of a pair.
Reduced test case:
#include <assert.h>
#include <stdio.h>
#include <string>
#include <utility>
#include <vector>
void do_push_back(
std::vector<std::pair<std::string, std::vector<std::string>>>* crls) {
crls->push_back(std::make_pair(std::string(), std::vector<std::string>()));
}
int __attribute__((optnone)) main() {
// Put some data in the vector and then remove it so we take the push_back
// fast path.
std::vector<std::pair<std::string, std::vector<std::string>>> crl_set;
crl_set.push_back({"asdf", {}});
crl_set.pop_back();
printf("first word in vector storage: %p\n", *(void**)crl_set.data());
// Do the push_back which may fail to initialize the data.
do_push_back(&crl_set);
auto* first = &crl_set.back().first;
printf("first word in vector storage (should be zero): %p\n",
*(void**)crl_set.data());
assert(first->empty());
puts("ok");
}
Compile with libc++, enable optimizations, and enable debug info:
$ clang++ -stdlib=libc++ -g -O2 t.cpp -o t.exe -Wl,-rpath=llvm/build/lib
This program will assert with this change.
llvm-svn: 321510
This teaches memcpyopt to make a non-local memdep query when a local query
indicates that the dependency is non-local. This notably allows it to
eliminate many more llvm.memcpy calls in common Rust code, often by 20-30%.
This is r319482 and r319483, along with fixes for PR35519: fix the
optimization that merges stores into memsets to preserve cached memdep
info, and fix memdep's non-local caching strategy to not assume that larger
queries are always more conservative than smaller ones.
Fixes PR28958 and PR35519.
Differential Revision: https://reviews.llvm.org/D40802
llvm-svn: 321138
This caused PR35519.
> [memcpyopt] Teach memcpyopt to optimize across basic blocks
>
> This teaches memcpyopt to make a non-local memdep query when a local query
> indicates that the dependency is non-local. This notably allows it to
> eliminate many more llvm.memcpy calls in common Rust code, often by 20-30%.
>
> Fixes PR28958.
>
> Differential Revision: https://reviews.llvm.org/D38374
>
> [memcpyopt] Commit file missed in r319482.
>
> This change was meant to be included with r319482 but was accidentally
> omitted.
llvm-svn: 319873
Summary:
The aim is to make ModRefInfo checks and changes more intuitive
and less error prone using inline methods that abstract the bit operations.
Ideally ModRefInfo would become an enum class, but that change will require
a wider set of changes into FunctionModRefBehavior.
Reviewers: sanjoy, george.burgess.iv, dberlin, hfinkel
Subscribers: nlopes, llvm-commits
Differential Revision: https://reviews.llvm.org/D40749
llvm-svn: 319821
This teaches memcpyopt to make a non-local memdep query when a local query
indicates that the dependency is non-local. This notably allows it to
eliminate many more llvm.memcpy calls in common Rust code, often by 20-30%.
Fixes PR28958.
Differential Revision: https://reviews.llvm.org/D38374
llvm-svn: 319482
Summary:
Adding part of the changes in D30369 (needed to make progress):
Current patch updates AliasAnalysis and MemoryLocation, but does _not_ clean up MemorySSA.
Original summary from D30369, by dberlin:
Currently, we have instructions which affect memory but have no memory
location. If you call, for example, MemoryLocation::get on a fence,
it asserts. This means things specifically have to avoid that. It
also means we end up with a copy of each API, one taking a memory
location, one not.
This starts to fix that.
We add MemoryLocation::getOrNone as a new call, and reimplement the
old asserting version in terms of it.
We make MemoryLocation optional in the (Instruction, MemoryLocation)
version of getModRefInfo, and kill the old one argument version in
favor of passing None (it had one caller). Now both can handle fences
because you can just use MemoryLocation::getOrNone on an instruction
and it will return a correct answer.
We use all this to clean up part of MemorySSA that had to handle this difference.
Note that literally every actual getModRefInfo interface we have could be made private and replaced with:
getModRefInfo(Instruction, Optional<MemoryLocation>)
and
getModRefInfo(Instruction, Optional<MemoryLocation>, Instruction, Optional<MemoryLocation>)
and delegating to the right ones, if we wanted to.
I have not attempted to do this yet.
Reviewers: dberlin, davide, dblaikie
Subscribers: sanjoy, hfinkel, chandlerc, llvm-commits
Differential Revision: https://reviews.llvm.org/D35441
llvm-svn: 309641
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
The method is called "get *Param* Alignment", and is only used for
return values exactly once, so it should take argument indices, not
attribute indices.
Avoids confusing code like:
IsSwiftError = CS->paramHasAttr(ArgIdx, Attribute::SwiftError);
Alignment = CS->getParamAlignment(ArgIdx + 1);
Add getRetAlignment to handle the one case in Value.cpp that wants the
return value alignment.
This is a potentially breaking change for out-of-tree backends that do
their own call lowering.
llvm-svn: 301682
Summary:
The LibFunc::Func enum holds enumerators named for libc functions.
Unfortunately, there are real situations, including libc implementations, where
function names are actually macros (musl uses "#define fopen64 fopen", for
example; any other transitively visible macro would have similar effects).
Strictly speaking, a conforming C++ Standard Library should provide any such
macros as functions instead (via <cstdio>). However, there are some "library"
functions which are not part of the standard, and thus not subject to this
rule (fopen64, for example). So, in order to be both portable and consistent,
the enum should not use the bare function names.
The old enum naming used a namespace LibFunc and an enum Func, with bare
enumerators. This patch changes LibFunc to be an enum with enumerators prefixed
with "LibFFunc_". (Unfortunately, a scoped enum is not sufficient to override
macros.)
There are additional changes required in clang.
Reviewers: rsmith
Subscribers: mehdi_amini, mzolotukhin, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D28476
llvm-svn: 292848
a function's CFG when that CFG is unchanged.
This allows transformation passes to simply claim they preserve the CFG
and analysis passes to check for the CFG being preserved to remove the
fanout of all analyses being listed in all passes.
I've gone through and removed or cleaned up as many of the comments
reminding us to do this as I could.
Differential Revision: https://reviews.llvm.org/D28627
llvm-svn: 292054
After r289755, the AssumptionCache is no longer needed. Variables affected by
assumptions are now found by using the new operand-bundle-based scheme. This
new scheme is more computationally efficient, and also we need much less
code...
llvm-svn: 289756
Instead, expose whether the current type is an array or a struct, if an array
what the upper bound is, and if a struct the struct type itself. This is
in preparation for a later change which will make PointerType derive from
Type rather than SequentialType.
Differential Revision: https://reviews.llvm.org/D26594
llvm-svn: 288458
Argument evaluation order is one of the edge cases where Clang differs
from GCC, yielding different IR depending on which compiler LLVM was
built with. Make the order deterministic and tune the test to actually
verify the order instead of trying to hide it.
llvm-svn: 286126
Summary:
This fixes pr29105. The reason is that lifetime marks creates new
aliasing pointers the original ones, but before this patch aliases
were not checked in performMemCpyToMemSetOptzn.
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23846
llvm-svn: 279769
Nikita Popov