FixIrreducibleControlFlow pass adds dispatch blocks with a `br_table`
that has multiple predecessors and successors, because it serves as
something like a traffic hub for BBs. As a result of this, there can be
register uses that are not dominated by a def in every path from the
entry block. For example, suppose register %a is defined in BB1 and used
in BB2, and there is a single path from BB1 and BB2:
```
BB1 -> ... -> BB2
```
After FixIrreducibleControlFlow runs, there can be a dispatch block
between these two BBs:
```
BB1 -> ... -> Dispatch -> ... -> BB2
```
And this dispatch block has multiple predecessors, now
there is a path to BB2 that does not first visit BB1, and in that path
%a is not dominated by a def anymore.
To fix this problem, we have been adding `IMPLICIT_DEF`s to all
registers in PrepareForLiveInternals pass, and then remove unnecessary
ones in OptimizeLiveIntervals pass after computing `LiveIntervals`. But
FixIrreducibleControlFlow pass itself ends up violating register use-def
relationship, resulting in invalid code. This was OK so far because
MIR verifier apparently didn't check this in validation. But @arsenm
fixed this and it caught this bug in validation
(https://github.com/llvm/llvm-project/issues/55249).
This CL moves the `IMPLICIT_DEF` adding routine from
PrepareForLiveInternals to FixIrreducibleControlFlow. We only run it
when FixIrreducibleControlFlow changes the code. And then
PrepareForLiveInternals doesn't do anything other than setting
`TracksLiveness` property, which is a prerequisite for running
`LiveIntervals` analysis, which is required by the next pass
OptimizeLiveIntervals.
But in our backend we don't seem to do anything that invalidates this up
until OptimizeLiveIntervals, and I'm not sure why we are calling
`invalidateLiveness` in ReplacePhysRegs pass, because what that pass
does is to replace physical registers with virtual ones 1-to-1. I
deleted the `invalidateLiveness` call there and we don't need to set
that flag explicitly, which obviates all the need for
PrepareForLiveInternals.
(By the way, This 'Liveness' here is different from `LiveIntervals`
analysis. Setting this only means BBs' live-in info is correct, all uses
are dominated by defs, `kill` flag is conservatively correct, which
means if there is a `kill` flag set it should be the last use. See
2a0837aab1/llvm/include/llvm/CodeGen/MachineFunction.h (L125-L134)
for details.)
So this CL removes PrepareForLiveInternals pass altogether. Something
similar to this was attempted by D56091 long ago but that came short of
actually removing the pass, and I couldn't land it because
FixIrreducibleControlFlow violated use-def relationship, which this CL
fixes.
This doesn't change output in any meaningful way. All test changes
except `irreducible-cfg.mir` are register numbering.
Also this will likely to reduce compilation time, because we have been
adding `IMPLICIT_DEF` for all registers every time `-O2` is given, but
now we do that only when there is irreducible control flow, which is
rare.
Fixes https://github.com/llvm/llvm-project/issues/55249.
Reviewed By: dschuff, kripken
Differential Revision: https://reviews.llvm.org/D125515
For MachO, lower `@llvm.global_dtors` into `@llvm_global_ctors` with
`__cxa_atexit` calls to avoid emitting the deprecated `__mod_term_func`.
Reuse the existing `WebAssemblyLowerGlobalDtors.cpp` to accomplish this.
Enable fallback to the old behavior via Clang driver flag
(`-fregister-global-dtors-with-atexit`) or llc / code generation flag
(`-lower-global-dtors-via-cxa-atexit`). This escape hatch will be
removed in the future.
Differential Revision: https://reviews.llvm.org/D121736
For MachO, lower `@llvm.global_dtors` into `@llvm_global_ctors` with
`__cxa_atexit` calls to avoid emitting the deprecated `__mod_term_func`.
Reuse the existing `WebAssemblyLowerGlobalDtors.cpp` to accomplish this.
Enable fallback to the old behavior via Clang driver flag
(`-fregister-global-dtors-with-atexit`) or llc / code generation flag
(`-lower-global-dtors-via-cxa-atexit`). This escape hatch will be
removed in the future.
Differential Revision: https://reviews.llvm.org/D121736
For MachO, lower `@llvm.global_dtors` into `@llvm_global_ctors` with
`__cxa_atexit` calls to avoid emitting the deprecated `__mod_term_func`.
Reuse the existing `WebAssemblyLowerGlobalDtors.cpp` to accomplish this.
Enable fallback to the old behavior via Clang driver flag
(`-fregister-global-dtors-with-atexit`) or llc / code generation flag
(`-lower-global-dtors-via-cxa-atexit`). This escape hatch will be
removed in the future.
Differential Revision: https://reviews.llvm.org/D121327
This CL is small, but the description can be a little long because I'm
trying to sum up the status quo for Emscripten/Wasm EH/SjLj options.
First, this CL adds an option for Wasm SjLj (`-wasm-enable-sjlj`), which
handles SjLj using Wasm EH. The implementation for this will be added as
a followup CL, but this adds the option first to do error checking.
This also adds an option for Wasm EH (`-wasm-enable-eh`), which has been
already implemented. Before we used `-exception-model=wasm` as the same
meaning as enabling Wasm EH, but after we add Wasm SjLj, it will be
possible to use Wasm EH instructions for Wasm SjLj while not enabling
EH, so going forward, to use Wasm EH, `opt` and `llc` will need this
option. This only affects `opt` and `llc` command lines and does not
affect Emscripten user interface.
Now we have two modes of EH (Emscripten/Wasm) and also two modes of SjLj
(also Emscripten/Wasm). The options corresponding to each of are:
- Emscripten EH: `-enable-emscripten-cxx-exceptions`
- Emscripten SjLj: `-enable-emscripten-sjlj`
- Wasm EH: `-wasm-enable-eh -exception-model=wasm`
`-mattr=+exception-handling`
- Wasm SjLj: `-wasm-enable-sjlj -exception-model=wasm`
`-mattr=+exception-handling`
The reason Wasm EH/SjLj's options are a little complicated are
`-exception-model` and `-mattr` are common LLVM options ane not under
our control. (`-mattr` can be omitted if it is embedded within the
bitcode file.)
And we have the following rules of the option composition:
- Emscripten EH and Wasm EH cannot be turned on at the same itme
- Emscripten SjLj and Wasm SjLj cannot be turned on at the same time
- Wasm SjLj should be used with Wasm EH
Which means we now allow these combinations:
- Emscripten EH + Emscripten SjLj: the current default in `emcc`
- Wasm EH + Emscripten SjLj:
This is allowed, but only as an interim step in which we are testing
Wasm EH but not yet have a working implementation of Wasm SjLj. This
will error out (D107687) in compile time if `setjmp` is called in a
function in which Wasm exception is used.
- Wasm EH + Wasm SjLj:
This will be the default mode later when using Wasm EH. Currently Wasm
SjLj implementation doesn't exist, so it doesn't work.
- Emscripten EH + Wasm SjLj will not work.
This CL moves these error checking routines to
`WebAssemblyPassConfig::addIRPasses`. Not sure if this is an ideal place
to do this, but I couldn't find elsewhere. Currently some checking is
done within LowerEmscriptenEHSjLj, but these checks only run if
LowerEmscriptenEHSjLj runs so it may not run when Wasm EH is used. This
moves that to `addIRPasses` and adds some more checks.
Currently LowerEmscriptenEHSjLj pass is responsible for Emscripten EH
and Emscripten SjLj. Wasm EH transformations are done in multiple
places, including WasmEHPrepare, LateEHPrepare, and CFGStackify. But in
the followup CL, LowerEmscriptenEHSjLj pass will be also responsible for
a part of Wasm SjLj transformation, because WasmSjLj will also be using
several Emscripten library functions, and we will be sharing more than
half of the transformation to do that between Emscripten SjLj and Wasm
SjLj.
Currently we have `-enable-emscripten-cxx-exceptions` and
`-enable-emscripten-sjlj` but these only work for `llc`, because for
`llc` we feed these options to the pass but when we run the pass using
`opt` the pass will be created with no options and the default options
will be used, which turns both Emscripten EH and Emscripten SjLj on.
Now we have one more SjLj option to care for, LowerEmscriptenEHSjLj pass
needs a finer way to control these options. This CL removes those
default parameters and make LowerEmscriptenEHSjLj pass read directly
from command line options specified. So if we only run
`opt -wasm-lower-em-ehsjlj`, currently both Emscripten EH and Emscripten
SjLj will run, but with this CL, none will run unless we additionally
pass `-enable-emscripten-cxx-exceptions` or `-enable-emscripten-sjlj`,
or both. This does not affect users; this only affects our `opt` tests
because `emcc` will not call either `opt` or `llc`. As a result of this,
our existing Emscripten EH/SjLj tests gained one or both of those
options in their `RUN` lines.
Reviewed By: dschuff
Differential Revision: https://reviews.llvm.org/D107685
Add new pass LowerRefTypesIntPtrConv to generate debugtrap
instruction for an inttoptr and ptrtoint of a reference type instead
of erroring, since calling these instructions on non-integral pointers
has been since allowed (see ac81cb7e6).
Differential Revision: https://reviews.llvm.org/D107102
Add new pass LowerRefTypesIntPtrConv to generate trap
instruction for an inttoptr and ptrtoint of a reference type instead
of erroring, since calling these instructions on non-integral pointers
has been since allowed (see ac81cb7e6).
Differential Revision: https://reviews.llvm.org/D107102
When Emscripten EH mixes with Emscripten SjLj, we are not currently
handling some of them correctly. There are three cases:
1. The current function calls `setjmp` and there is an `invoke` to a
function that can either throw or longjmp. In this case, we have to
check both for exception and longjmp. We are currently handling this
case correctly:
0c0eb76782/llvm/lib/Target/WebAssembly/WebAssemblyLowerEmscriptenEHSjLj.cpp (L1058-L1090)
When inserting routines for functions that can longjmp, which we do
only for setjmp-calling functions, we check if the function was
previously an `invoke` and handle it correctly.
2. The current function does NOT call `setjmp` and there is an `invoke`
to a function that can either throw or longjmp. Because there is no
`setjmp` call, we haven't been doing any check for functions that can
longjmp. But in that case, for `invoke`, we only check for an
exception and if it is not an exception we reset `__THREW__` to 0,
which can silently swallow the longjmp:
0c0eb76782/llvm/lib/Target/WebAssembly/WebAssemblyLowerEmscriptenEHSjLj.cpp (L70-L80)
This CL fixes this.
3. The current function calls `setjmp` and there is no `invoke`. Because
it is not an `invoke`, we haven't been doing any check for functions
that can throw, and only insert longjmp-checking routines for
functions that can longjmp. But in that case, if a longjmpable
function throws, we only check for a longjmp so if it is not a
longjmp we reset `__THREW__` to 0, which can silently swallow the
exception:
0c0eb76782/llvm/lib/Target/WebAssembly/WebAssemblyLowerEmscriptenEHSjLj.cpp (L156-L169)
This CL fixes this.
To do that, this moves around some code, so we register necessary
functions for both EH and SjLj and precompute some data (the set of
functions that contains `setjmp`) before doing actual EH or SjLj
transformation.
This CL makes 2nd and 3rd tests in
https://github.com/emscripten-core/emscripten/pull/14732 work.
Reviewed By: dschuff
Differential Revision: https://reviews.llvm.org/D106525
This to protect against non-sensical instruction sequences being assembled,
which would either cause asserts/crashes further down, or a Wasm module being output that doesn't validate.
Unlike a validator, this type checker is able to give type-errors as part of the parsing process, which makes the assembler much friendlier to be used by humans writing manual input.
Because the MC system is single pass (instructions aren't even stored in MC format, they are directly output) the type checker has to be single pass as well, which means that from now on .globaltype and .functype decls must come before their use. An extra pass is added to Codegen to collect information for this purpose, since AsmPrinter is normally single pass / streaming as well, and would otherwise generate this information on the fly.
A `-no-type-check` flag was added to llvm-mc (and any other tools that take asm input) that surpresses type errors, as a quick escape hatch for tests that were not intended to be type correct.
This is a first version of the type checker that ignores control flow, i.e. it checks that types are correct along the linear path, but not the branch path. This will still catch most errors. Branch checking could be added in the future.
Differential Revision: https://reviews.llvm.org/D104945
`WebAssemblyDebugValueManager` does not currently handle
`DBG_VALUE_LIST`, which is a recent addition to LLVM. We tried to
nullify them within the constructor of `WebAssemblyDebugValueManager` in
D102589, but it made the class error-prone to use because it deletes
instructions within the constructor and thus invalidates existing
iterators within the BB, so the user of the class should take special
care not to use invalidated iterators. This actually caused a bug in
ExplicitLocals pass.
Instead of trying to fix ExplicitLocals pass to make the iterator usage
correct, which is possible but error-prone, this adds
NullifyDebugValueLists pass that nullifies all `DBG_VALUE_LIST`
instructions before we run WebAssembly specific passes in the backend.
We can remove this pass after we implement handlers for
`DBG_VALUE_LIST`s in `WebAssemblyDebugValueManager` and elsewhere.
Fixes https://github.com/emscripten-core/emscripten/issues/14255.
Reviewed By: dschuff
Differential Revision: https://reviews.llvm.org/D102999
Background:
Wasm EH, while using Windows EH (catchpad/cleanuppad based) IR, uses
Itanium-based libraries and ABIs with some modifications.
`__clang_call_terminate` is a wrapper generated in Clang's Itanium C++
ABI implementation. It contains this code, in C-style pseudocode:
```
void __clang_call_terminate(void *exn) {
__cxa_begin_catch(exn);
std::terminate();
}
```
So this function is a wrapper to call `__cxa_begin_catch` on the
exception pointer before termination.
In Itanium ABI, this function is called when another exception is thrown
while processing an exception. The pointer for this second, violating
exception is passed as the argument of this `__clang_call_terminate`,
which calls `__cxa_begin_catch` with that pointer and calls
`std::terminate` to terminate the program.
The spec (https://libcxxabi.llvm.org/spec.html) for `__cxa_begin_catch`
says,
```
When the personality routine encounters a termination condition, it
will call __cxa_begin_catch() to mark the exception as handled and then
call terminate(), which shall not return to its caller.
```
In wasm EH's Clang implementation, this function is called from
cleanuppads that terminates the program, which we also call terminate
pads. Cleanuppads normally don't access the thrown exception and the
wasm backend converts them to `catch_all` blocks. But because we need
the exception pointer in this cleanuppad, we generate
`wasm.get.exception` intrinsic (which will eventually be lowered to
`catch` instruction) as we do in the catchpads. But because terminate
pads are cleanup pads and should run even when a foreign exception is
thrown, so what we have been doing is:
1. In `WebAssemblyLateEHPrepare::ensureSingleBBTermPads()`, we make sure
terminate pads are in this simple shape:
```
%exn = catch
call @__clang_call_terminate(%exn)
unreachable
```
2. In `WebAssemblyHandleEHTerminatePads` pass at the end of the
pipeline, we attach a `catch_all` to terminate pads, so they will be in
this form:
```
%exn = catch
call @__clang_call_terminate(%exn)
unreachable
catch_all
call @std::terminate()
unreachable
```
In `catch_all` part, we don't have the exception pointer, so we call
`std::terminate()` directly. The reason we ran HandleEHTerminatePads at
the end of the pipeline, separate from LateEHPrepare, was it was
convenient to assume there was only a single `catch` part per `try`
during CFGSort and CFGStackify.
---
Problem:
While it thinks terminate pads could have been possibly split or calls
to `__clang_call_terminate` could have been duplicated,
`WebAssemblyLateEHPrepare::ensureSingleBBTermPads()` assumes terminate
pads contain no more than calls to `__clang_call_terminate` and
`unreachable` instruction. I assumed that because in LLVM very limited
forms of transformations are done to catchpads and cleanuppads to
maintain the scoping structure. But it turned out to be incorrect;
passes can merge cleanuppads into one, including terminate pads, as long
as the new code has a correct scoping structure. One pass that does this
I observed was `SimplifyCFG`, but there can be more. After this
transformation, a single cleanuppad can contain any number of other
instructions with the call to `__clang_call_terminate` and can span many
BBs. It wouldn't be practical to duplicate all these BBs within the
cleanuppad to generate the equivalent `catch_all` blocks, only with
calls to `__clang_call_terminate` replaced by calls to `std::terminate`.
Unless we do more complicated transformation to split those calls to
`__clang_call_terminate` into a separate cleanuppad, it is tricky to
solve.
---
Solution (?):
This CL just disables the generation and use of `__clang_call_terminate`
and calls `std::terminate()` directly in its place.
The possible downside of this approach can be, because the Itanium ABI
intended to "mark" the violating exception handled, we don't do that
anymore. What `__cxa_begin_catch` actually does is increment the
exception's handler count and decrement the uncaught exception count,
which in my opinion do not matter much given that we are about to
terminate the program anyway. Also it does not affect info like stack
traces that can be possibly shown to developers.
And while we use a variant of Itanium EH ABI, we can make some
deviations if we choose to; we are already different in that in the
current version of the EH spec we don't support two-phase unwinding. We
can possibly consider a more complicated transformation later to
reenable this, but I don't think that has high priority.
Changes in this CL contains:
- In Clang, we don't generate a call to `wasm.get.exception()` intrinsic
and `__clang_call_terminate` function in terminate pads anymore; we
simply generate calls to `std::terminate()`, which is the default
implementation of `CGCXXABI::emitTerminateForUnexpectedException`.
- Remove `WebAssembly::ensureSingleBBTermPads() function and
`WebAssemblyHandleEHTerminatePads` pass, because terminate pads are
already `catch_all` now (because they don't need the exception
pointer) and we don't need these transformations anymore.
- Change tests to use `std::terminate` directly. Also removes tests that
tested `LateEHPrepare::ensureSingleBBTermPads` and
`HandleEHTerminatePads` pass.
- Drive-by fix: Add some function attributes to EH intrinsic
declarations
Fixes https://github.com/emscripten-core/emscripten/issues/13582.
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D97834
Terminate pads, cleanup pads with `__clang_call_terminate` call, have
`catch` instruction in them because `__clang_call_terminate` takes an
exception pointer. But these terminate pads should be reached also in
case of foreign exception. So this pass attaches an additional
`catch_all` BB after every terminate pad BB, with a call to
`std::terminate`.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D94050
This reverts commit 755a895915.
Although I was not able to reproduce any test failures locally,
aheejin was able to reproduce them and found a fix, applied here.
Summary:
Jump tables for most targets cannot handle out of range indices by
themselves, so LLVM emits range checks to guard the jump
tables. WebAssembly, on the other hand, implements jump tables using
the br_table instruction, which takes a default branch target as an
operand, making the range checks redundant. This patch introduces a
new MachineFunction pass in the WebAssembly backend to find and
eliminate the redundant range checks.
Reviewers: aheejin, dschuff
Subscribers: mgorny, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80863
Summary:
Extends the multivalue call infrastructure to tail calls, removes all
legacy calls specialized for particular result types, and removes the
CallIndirectFixup pass, since all indirect call arguments are now
fixed up directly in the post-insertion hook.
In order to keep supporting pretty-printed defs and uses in test
expectations, MCInstLower now inserts an immediate containing the
number of defs for each call and call_indirect. The InstPrinter is
updated to query this immediate if it is present and determine which
MCOperands are defs and uses accordingly.
Depends on D72902.
Reviewers: aheejin
Subscribers: dschuff, mgorny, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74192
Extends DWARF expression language to express locals/globals locations. (via
target-index operands atm) (possible variants are: non-virtual registers
or address spaces)
The WebAssemblyExplicitLocals can replace virtual registers to targertindex
operand type at the time when WebAssembly backend introduces
{get,set,tee}_local instead of corresponding virtual registers.
Reviewed By: aprantl, dschuff
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D52634
Summary:
While this does not change any final output, this will greatly simplify
ixing unwind destination mismatches in CFGStackify (D48345), because we
have to create some new registers there.
Reviewers: dschuff
Subscribers: sunfish, sbc100, jgravelle-google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59652
llvm-svn: 357342
Summary:
After the staack is unwound due to a thrown exxception,
`__stack_pointer` global can point to an invalid address. So
a `global.set` to restore `__stack_pointer` should be inserted right
after `catch` instruction.
But after r352598 the `global.set` instruction is inserted not right
after `catch` but after `block` - `br-on-exn` - `end_block` -
`extract_exception` sequence. This CL fixes it.
While doing that, we can actually move ReplacePhysRegs pass after
LateEHPrepare and merge EHRestoreStackPointer pass into LateEHPrepare,
and now placing `global.set` to `__stack_pointer` right after `catch` is
much easier. Otherwise it is hard to guarantee that `global.set` is
still right after `catch` and not touched with other transformations, in
which case we have to do something to hoist it.
Reviewers: dschuff
Subscribers: mgorny, sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D57421
llvm-svn: 352681
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
StoreResults pass does not optimize store instructions anymore because
store instructions don't return results values anymore. Now this pass is
used solely for memory intrinsics, so update the pass name accordingly
and fix outdated pass descriptions as well.
This patch does not change any meaningful behavior, but not marked as
NFC because it changes a comment check line in a test case.
Reviewers: dschuff
Subscribers: mgorny, sbc100, jgravelle-google, sunfiish, llvm-commits
Differential Revision: https://reviews.llvm.org/D56093
llvm-svn: 350669
Summary:
After the stack is unwound due to a thrown exception, the
`__stack_pointer` global can point to an invalid address. This inserts
instructions that restore `__stack_pointer` global.
Reviewers: jgravelle-google, dschuff
Subscribers: mgorny, sbc100, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D50980
llvm-svn: 340339
Summary:
A WebAssemblyException object contains BBs that belong to a 'catch' part
of the try-catch-end structure. Because CFGSort requires all the BBs
within a catch part to be sorted together as it does for loops, this
pass calculates the nesting structure of catch part of exceptions in a
function. Now this assumes the use of Windows EH instructions.
Reviewers: dschuff, majnemer
Subscribers: jfb, mgorny, sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D44134
llvm-svn: 335439
Summary:
Add WebAssemblyLateEHPrepare pass that does several small jobs for
exception handling. This runs before CFGSort, and is different from
WasmEHPrepare pass that runs before ISel, even though the names are
similar.
Reviewers: dschuff, majnemer
Subscribers: sbc100, jgravelle-google, sunfish, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D46803
llvm-svn: 335438
Summary:
This lowers exception catching-related instructions:
1. Lowers `wasm.catch` intrinsic to `catch` instruction
2. Removes `catchpad` and `cleanuppad` instructions; they are not
necessary after isel phase. (`MachineBasicBlock::isEHFuncletEntry()` or
`MachineBasicBlock::isEHPad()` can be used instead.)
3. Lowers `catchret` and `cleanupret` instructions to pseudo `catchret`
and `cleanupret` instructions in isel, which will be replaced with other
instructions in `WebAssemblyExceptionPrepare` pass.
4. Adds 'WebAssemblyExceptionPrepare` pass, which is for running various
transformation for EH. Currently this pass only replaces `catchret` and
`cleanupret` instructions into appropriate wasm instructions to make
this patch successfully run until the end.
Currently this does not handle lowering of intrinsics related to LSDA
info generation (`wasm.landingpad.index` and `wasm.lsda`), because they
cannot be tested without implementing `EHStreamer`'s wasm-specific
handlers. They are marked as TODO, which is needed to make isel pass.
Also this does not generate `try` and `end_try` markers yet, which will
be handled in later patches.
This patch is based on the first wasm EH proposal.
(https://github.com/WebAssembly/exception-handling/blob/master/proposals/Exceptions.md)
Reviewers: dschuff, majnemer
Subscribers: jfb, sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D44090
llvm-svn: 333705
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Summary:
This exposes WebAssembly passes for use on the command line (as
arguments to -print-before and the like).
Reviewers: dschuff, sunfish
Subscribers: MatzeB, jfb, sbc100, llvm-commits, aheejin
Differential Revision: https://reviews.llvm.org/D45103
llvm-svn: 328901
Summary:
- lowers @llvm.global_dtors by adding @llvm.global_ctors
functions which register the destructors with `__cxa_atexit`.
- impements @llvm.global_ctors with wasm start functions and linker metadata
See [here](https://github.com/WebAssembly/tool-conventions/issues/25) for more background.
Subscribers: jfb, dschuff, mgorny, jgravelle-google, aheejin, sunfish
Differential Revision: https://reviews.llvm.org/D41211
llvm-svn: 320774
WebAssembly requires caller and callee signatures to match exactly. In LLVM,
there are a variety of circumstances where signatures may be mismatched in
practice, and one can bitcast a function address to another type to call it
as that type. This patch adds a pass which replaces bitcasted function
addresses with wrappers to replace the bitcasts.
This doesn't catch everything, but it does match many common cases.
llvm-svn: 291315
This patch adds a pass, controlled by an option and off by default for
now, for making implicit get_local/set_local explicit. This simplifies
emitting wasm with MC.
Differential Revision: https://reviews.llvm.org/D25836
llvm-svn: 285009
Summary:
Need to reorder the operands to have the callee as the last argument.
Adds a pseudo-instruction, and a pass to lower it into a real
call_indirect.
This is the first of two options for how to fix the problem.
Reviewers: dschuff, sunfish
Subscribers: jfb, beanz, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D25708
llvm-svn: 284840
This patch changes the code structure of
WebAssemblyLowerEmscriptenException pass to support both exception
handling and setjmp/longjmp. It also changes the name of the pass and
the source file.
1. Change the file/pass name to WebAssemblyLowerEmscriptenExceptions ->
WebAssemblyLowerEmscriptenEHSjLj to make it clear that it supports both
EH and SjLj
2. List function / global variable names at the top so they
can be changed easily
3. Some cosmetic changes
Patch by Heejin Ahn
Differential Revision: https://reviews.llvm.org/D23588
llvm-svn: 279075
Summary: This patch includes asm.js-style exception handling support for
WebAssembly. The WebAssembly MVP does not have any support for
unwinding or non-local control flow. In order to support C++ exceptions,
emscripten currently uses JavaScript exceptions along with some support
code (written in JavaScript) that is bundled by emscripten with the
generated code.
This scheme lowers exception-related instructions for wasm such that
wasm modules can be compatible with emscripten's existing scheme and
share the support code.
Patch by Heejin Ahn
Differential Revision: https://reviews.llvm.org/D22958
llvm-svn: 277391
Move the register stackification and coloring passes to run very late, after
PEI, tail duplication, and most other passes. This means that all code emitted
and expanded by those passes is now exposed to these passes. This also
eliminates the need for prologue/epilogue code to be manually stackified,
which significantly simplifies the code.
This does require running LiveIntervals a second time. It's useful to think
of these late passes not as late optimization passes, but as a domain-specific
compression algorithm based on knowledge of liveness information. It's used to
compress the code after all conventional optimizations are complete, which is
why it uses LiveIntervals at a phase when actual optimization passes don't
typically need it.
Differential Revision: http://reviews.llvm.org/D20075
llvm-svn: 269012
This implements a very simple conservative transformation that doesn't
require more than linear code size growth. There's room for much more
optimization in this space.
llvm-svn: 262982
Summary:
Use the SP32 physical register as the base for FrameIndex
lowering. Update it and the __stack_pointer global var in the prolog and
epilog. Extend the mapping of virtual registers to wasm locals to
include the physical registers.
Rather than modify the target-independent PrologEpilogInserter (which
asserts that there are no virtual registers left) include a
slightly-modified copy for Wasm that does not have this assertion and
only clears the virtual registers if scavenging was needed (which of
course it isn't for wasm).
Differential Revision: http://reviews.llvm.org/D15344
llvm-svn: 255392
Reinteroduce the code for moving ARGUMENTS back to the top of the basic block.
While the ARGUMENTS physical register prevents sinking and scheduling from
moving them, it does not appear to be sufficient to prevent SelectionDAG from
moving them down in the initial schedule. This patch introduces a patch that
moves them back to the top immediately after SelectionDAG runs.
This is still hopefully a temporary solution. http://reviews.llvm.org/D14750 is
one alternative, though the review has not been favorable, and proposed
alternatives are longer-term and have other downsides.
This fixes the main outstanding -verify-machineinstrs failures, so it adds
-verify-machineinstrs to several tests.
Differential Revision: http://reviews.llvm.org/D15377
llvm-svn: 255125
This patch introduces a codegen-only instruction currently named br_unless,
which makes it convenient to implement ReverseBranchCondition and re-enable
the MachineBlockPlacement pass. Then in a late pass, it lowers br_unless
back into br_if.
Differential Revision: http://reviews.llvm.org/D14995
llvm-svn: 254826
Heejin Ahn