Propagate PC sections metadata to MachineInstr when FastISel is doing
instruction selection.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D130884
This refactors some code dealing with setting Wasm symbol types.
Some of the code dealing with types was moved from
`WebAssemblyUtilities` to `WebAssemblyTypeUtilities`.
Reviewed By: sbc100
Differential Revision: https://reviews.llvm.org/D118121
If the icmp is in a different block, then the register for the icmp
operand may not be initialized, as it nominally does not have
cross-block uses. Add a check that the icmp is in the same block
as the branch, which should be the common case.
This matches what X86 FastISel does:
5b6b090cf2/llvm/lib/Target/X86/X86FastISel.cpp (L1648)
The "not" transform that could have a similar issue is dropped
entirely, because it is currently dead: The incoming value is
a branch or select condition of type i1, but this code requires
an i32 to trigger.
Fixes https://bugs.llvm.org/show_bug.cgi?id=51651.
Differential Revision: https://reviews.llvm.org/D108840
AttributeList::hasAttribute() is confusing, use clearer methods like
hasParamAttr()/hasRetAttr().
Add hasRetAttr() since it was missing from AttributeList.
Reland of 31859f896.
This change implements new DAG notes GLOBAL_GET/GLOBAL_SET, and
lowering methods for load and stores of reference types from IR
globals. Once the lowering creates the new nodes, tablegen pattern
matches those and converts them to Wasm global.get/set.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D104797
Reland of 31859f896.
This change implements new DAG notes GLOBAL_GET/GLOBAL_SET, and
lowering methods for load and stores of reference types from IR
globals. Once the lowering creates the new nodes, tablegen pattern
matches those and converts them to Wasm global.get/set.
Differential Revision: https://reviews.llvm.org/D104797
This change implements new DAG notes GLOBAL_GET/GLOBAL_SET, and
lowering methods for load and stores of reference types from IR
globals. Once the lowering creates the new nodes, tablegen pattern
matches those and converts them to Wasm global.get/set.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D95425
This patch adds support for WebAssembly globals in LLVM IR, representing
them as pointers to global values, in a non-default, non-integral
address space. Instruction selection legalizes loads and stores to
these pointers to new WebAssemblyISD nodes GLOBAL_GET and GLOBAL_SET.
Once the lowering creates the new nodes, tablegen pattern matches those
and converts them to Wasm global.get/set of the appropriate type.
Based on work by Paulo Matos in https://reviews.llvm.org/D95425.
Reviewed By: pmatos
Differential Revision: https://reviews.llvm.org/D101608
This CL
1. Creates Utils/ directory under lib/Target/WebAssembly
2. Moves existing WebAssemblyUtilities.cpp|h into the Utils/ directory
3. Creates Utils/WebAssemblyTypeUtilities.cpp|h and put type
declarataions and type conversion functions scattered in various
places into this single place.
It has been suggested several times that it is not easy to share utility
functions between subdirectories (AsmParser, DIsassembler, MCTargetDesc,
...). Sometimes we ended up [[ https://reviews.llvm.org/D92840#2478863 | duplicating ]] the same function because of
this.
There are already other targets doing this: AArch64, AMDGPU, and ARM
have Utils/ subdirectory under their target directory.
This extracts the utility functions into a single directory Utils/ and
make them sharable among all passes in WebAssembly/ and its
subdirectories. Also I believe gathering all type-related conversion
functionalities into a single place makes it more usable. (Actually I
was working on another CL that uses various type conversion functions
scattered in multiple places, which became the motivation for this CL.)
Reviewed By: dschuff, aardappel
Differential Revision: https://reviews.llvm.org/D100995
This is a followup to D98145: As far as I know, tracking of kill
flags in FastISel is just a compile-time optimization. However,
I'm not actually seeing any compile-time regression when removing
the tracking. This probably used to be more important in the past,
before FastRA was switched to allocate instructions in reverse
order, which means that it discovers kills as a matter of course.
As such, the kill tracking doesn't really seem to serve a purpose
anymore, and just adds additional complexity and potential for
errors. This patch removes it entirely. The primary changes are
dropping the hasTrivialKill() method and removing the kill
arguments from the emitFast methods. The rest is mechanical fixup.
Differential Revision: https://reviews.llvm.org/D98294
Now that the WebAssembly SIMD specification is finalized and engines are
generally up-to-date, there is no need for a separate target feature for gating
SIMD instructions that engines have not implemented. With this change,
v128.const is now enabled by default with the simd128 target feature.
Differential Revision: https://reviews.llvm.org/D98457
The WebAssembly text and binary formats have different operand orders
for the "type" and "table" fields of call_indirect (and
return_call_indirect). In LLVM we use the binary order for the MCInstr,
but when we produce or consume the text format we should use the text
order. For compilation units targetting WebAssembly 1.0 (without the
reference types feature), we omit the table operand entirely.
Differential Revision: https://reviews.llvm.org/D97761
If the reference-types feature is enabled, call_indirect will explicitly
reference its corresponding function table via TABLE_NUMBER
relocations against a table symbol.
Also, as before, address-taken functions can also cause the function
table to be created, only with reference-types they additionally cause a
symbol table entry to be emitted.
Differential Revision: https://reviews.llvm.org/D90948
If the reference-types feature is enabled, call_indirect will explicitly
reference its corresponding function table via `TABLE_NUMBER`
relocations against a table symbol.
Also, as before, address-taken functions can also cause the function
table to be created, only with reference-types they additionally cause a
symbol table entry to be emitted.
We abuse the used-in-reloc flag on symbols to indicate which tables
should end up in the symbol table. We do this because unfortunately
older wasm-ld will carp if it see a table symbol.
Differential Revision: https://reviews.llvm.org/D90948
This reverts commit 418df4a6ab.
This change broke emscripten tests, I believe because it started
generating 5-byte a wide table index in the call_indirect instruction.
Neither v8 nor wabt seem to be able to handle that. The spec
currently says that this is single 0x0 byte and:
"In future versions of WebAssembly, the zero byte occurring in the
encoding of the call_indirectcall_indirect instruction may be used to
index additional tables."
So we need to revisit this change. For backwards compat I guess
we need to guarantee that __indirect_function_table is always at
address zero. We could also consider making this a single-byte
relocation with and assert if have more than 127 tables (for now).
Differential Revision: https://reviews.llvm.org/D95005
This patch changes to make call_indirect explicitly refer to the
corresponding function table, residualizing TABLE_NUMBER relocs against
it.
With this change, wasm-ld now sees all references to tables, and can
link multiple tables.
Differential Revision: https://reviews.llvm.org/D90948
This removes `exnref` type and `br_on_exn` instruction. This is
effectively NFC because most uses of these were already removed in the
previous CLs.
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D94041
For wasm-ld table linking work to proceed, object files should indicate
if they use an indirect function table. In the future this will be done
by the usual symbols and relocations mechanism, but until that support
lands in the linker, the presence of an `__indirect_function_table` in
the object file's import section shows that the object file needs an
indirect function table.
Prior to https://reviews.llvm.org/D91637, this condition was met by all
object files residualizing an `__indirect_function_table` import.
Since https://reviews.llvm.org/D91637, the intention has been that only
those object files needing an indirect function table would have the
`__indirect_function_table` import. However, we missed the case of
object files which use the table via `call_indirect` but which
themselves do not declare any indirect functions.
This changeset makes it so that when we lower a call to `call_indirect`,
that we ensure that a `__indirect_function_table` symbol is present and
that it will be propagated to the linker.
A followup patch will revise this mechanism to make an explicit link
between `call_indirect` and its associated indirect function table; see
https://reviews.llvm.org/D90948.
Differential Revision: https://reviews.llvm.org/D92840
This adds missing `select` instruction support and block return type
support for reference types. Also refactors WebAssemblyInstrRef.td and
rearranges tests in reference-types.s. Tests don't include `exnref`
types, because we currently don't support `exnref` for `ref.null` and
the type will be removed soon anyway.
Reviewed By: tlively, sbc100, wingo
Differential Revision: https://reviews.llvm.org/D92359
Implementation of instructions table.get, table.set, table.grow,
table.size, table.fill, table.copy.
Missing instructions are table.init and elem.drop as they deal with
element sections which are not yet implemented.
Added more tests to tables.s
Differential Revision: https://reviews.llvm.org/D89797
Fixes PR47040, in which an assertion was improperly triggered during
FastISel's address computation. The issue was that an `Address` set to
be relative to the FrameIndex with offset zero was incorrectly
considered to have an unset base. When the left hand side of an add
set the Address to be 0 off the FrameIndex, the right side would not
detect that the Address base had already been set and could try to set
the Address to be relative to a register instead, triggering an
assertion.
This patch fixes the issue by explicitly tracking whether an `Address`
has been set rather than interpreting an offset of zero to mean the
`Address` has not been set.
Differential Revision: https://reviews.llvm.org/D85581
Context: https://github.com/WebAssembly/memory64/blob/master/proposals/memory64/Overview.md
This is just a first step, adding the new instruction variants while keeping the existing 32-bit functionality working.
Some of the basic load/store tests have new wasm64 versions that show that the basics of the target are working.
Further features need implementation, but these will be added in followups to keep things reviewable.
Differential Revision: https://reviews.llvm.org/D80769
This method has been commented as deprecated for a while. Remove
it and replace all uses with the equivalent getCalledOperand().
I also made a few cleanups in here. For example, to removes use
of getElementType on a pointer when we could just use getFunctionType
from the call.
Differential Revision: https://reviews.llvm.org/D78882
Summary:
Swift ABI is based on basic C ABI described here https://github.com/WebAssembly/tool-conventions/blob/master/BasicCABI.md
Swift Calling Convention on WebAssembly is a little deffer from swiftcc
on another architectures.
On non WebAssembly arch, swiftcc accepts extra parameters that are
attributed with swifterror or swiftself by caller. Even if callee
doesn't have these parameters, the invocation succeed ignoring extra
parameters.
But WebAssembly strictly checks that callee and caller signatures are
same. https://github.com/WebAssembly/design/blob/master/Semantics.md#calls
So at WebAssembly level, all swiftcc functions end up extra arguments
and all function definitions and invocations explicitly have additional
parameters to fill swifterror and swiftself.
This patch support signature difference for swiftself and swifterror cc
is swiftcc.
e.g.
```
declare swiftcc void @foo(i32, i32)
@data = global i8* bitcast (void (i32, i32)* @foo to i8*)
define swiftcc void @bar() {
%1 = load i8*, i8** @data
%2 = bitcast i8* %1 to void (i32, i32, i32)*
call swiftcc void %2(i32 1, i32 2, i32 swiftself 3)
ret void
}
```
For swiftcc, emit additional swiftself and swifterror parameters
if there aren't while lowering. These additional parameters are added
for both callee and caller.
They are necessary to match callee and caller signature for direct and
indirect function call.
Differential Revision: https://reviews.llvm.org/D76049
Summary:
Extends the multivalue call infrastructure to tail calls, removes all
legacy calls specialized for particular result types, and removes the
CallIndirectFixup pass, since all indirect call arguments are now
fixed up directly in the post-insertion hook.
In order to keep supporting pretty-printed defs and uses in test
expectations, MCInstLower now inserts an immediate containing the
number of defs for each call and call_indirect. The InstPrinter is
updated to query this immediate if it is present and determine which
MCOperands are defs and uses accordingly.
Depends on D72902.
Reviewers: aheejin
Subscribers: dschuff, mgorny, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74192
Summary:
This is necessary and sufficient to get simple cases of multiple
return working with multivalue enabled. More complex cases will
require block and loop signatures to be generalized to potentially be
type indices as well.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68684
llvm-svn: 374235
Summary:
Thread local variables are placed inside a `.tdata` segment. Their symbols are
offsets from the start of the segment. The address of a thread local variable
is computed as `__tls_base` + the offset from the start of the segment.
`.tdata` segment is a passive segment and `memory.init` is used once per thread
to initialize the thread local storage.
`__tls_base` is a wasm global. Since each thread has its own wasm instance,
it is effectively thread local. Currently, `__tls_base` must be initialized
at thread startup, and so cannot be used with dynamic libraries.
`__tls_base` is to be initialized with a new linker-synthesized function,
`__wasm_init_tls`, which takes as an argument a block of memory to use as the
storage for thread locals. It then initializes the block of memory and sets
`__tls_base`. As `__wasm_init_tls` will handle the memory initialization,
the memory does not have to be zeroed.
To help allocating memory for thread-local storage, a new compiler intrinsic
is introduced: `__builtin_wasm_tls_size()`. This instrinsic function returns
the size of the thread-local storage for the current function.
The expected usage is to run something like the following upon thread startup:
__wasm_init_tls(malloc(__builtin_wasm_tls_size()));
Reviewers: tlively, aheejin, kripken, sbc100
Subscribers: dschuff, jgravelle-google, hiraditya, sunfish, jfb, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D64537
llvm-svn: 366272
Summary:
We agreed to rename `except_ref` to `exnref` for consistency with other
reference types in
https://github.com/WebAssembly/exception-handling/issues/79. This also
renames WebAssemblyInstrExceptRef.td to WebAssemblyInstrRef.td in order
to use the file for other reference types in future.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64703
llvm-svn: 366145
Summary:
Implements direct and indirect tail calls enabled by the 'tail-call'
feature in both DAG ISel and FastISel. Updates existing call tests and
adds new tests including a binary encoding test.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62877
llvm-svn: 364445
Usually this will abort fast-isel at the instruction using the
non-legal result, but if the only use is in a different basic block,
we'll incorrectly assume that the zext/sext is to i32 (rather than
i128 in this case).
Differential Revision: https://reviews.llvm.org/D61823
llvm-svn: 360616
My understanding is that once BuildMI has been called we can't fallback
to SelectionDAG.
This change moves the fallback for when getRegForValue() fails for
that target of an indirect call. This was failing in -fPIC mode when
the callee is GlobalValue.
Add a test case that tickles this.
Differential Revision: https://reviews.llvm.org/D60908
llvm-svn: 358793
This change implements lowering of references global symbols in PIC
mode.
This change implements lowering of global references in PIC mode using a
new @GOT reference type. @GOT references can be used with function or
data symbol names combined with the get_global instruction. In this case
the linker will insert the wasm global that stores the address of the
symbol (either in memory for data symbols or in the wasm table for
function symbols).
For now I'm continuing to use the R_WASM_GLOBAL_INDEX_LEB relocation
type for this type of reference which means that this relocation type
can refer to either a global or a function or data symbol. We could
choose to introduce specific relocation types for GOT entries in the
future. See the current dynamic linking proposal:
https://github.com/WebAssembly/tool-conventions/blob/master/DynamicLinking.md
Differential Revision: https://reviews.llvm.org/D54647
llvm-svn: 357022
Summary:
This patch fixes clang-tidy warnings on wasm-only files.
The list of checks used is:
`-*,clang-diagnostic-*,llvm-*,misc-*,-misc-unused-parameters,readability-identifier-naming,modernize-*`
(LLVM's default .clang-tidy list is the same except it does not have
`modernize-*`. But I've seen in multiple CLs in LLVM the modernize style
was recommended and code was fixed based on the style, so I added it as
well.)
The common fixes are:
- Variable names start with an uppercase letter
- Function names start with a lowercase letter
- Use `auto` when you use casts so the type is evident
- Use inline initialization for class member variables
- Use `= default` for empty constructors / destructors
- Use `using` in place of `typedef`
Reviewers: sbc100, tlively, aardappel
Subscribers: dschuff, sunfish, jgravelle-google, yurydelendik, kripken, MatzeB, mgorny, rupprecht, llvm-commits
Differential Revision: https://reviews.llvm.org/D57500
llvm-svn: 353075
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
This is a third attempt, but this time we have vetted it on Windows
first. The previous errors were due to an uninitialized class member.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, sunfish, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D56560
llvm-svn: 350901
This is a second attempt at r350778, which was reverted in
r350789. The only change is that the unimplemented-simd128 feature has
been renamed simd128-unimplemented, since naming it
unimplemented-simd128 somehow made the simd128 feature flag enable the
unimplemented-simd128 feature on Windows.
llvm-svn: 350791
Marco Elver