regcomp.c uses the "start + count < end" idiom to check that there are
"count" bytes available in an array of char "start" and "end" both point
to.
This is fine, unless "start + count" goes beyond the last element of the
array. In this case, pedantic interpretation of the C standard makes
the comparison of such a pointer against "end" undefined, and optimizers
from hell will happily remove as much code as possible because of this.
An example of this occurs in regcomp.c's bothcases(), which defines
bracket[3], sets "next" to "bracket" and "end" to "bracket + 2". Then it
invokes p_bracket(), which starts with "if (p->next + 5 < p->end)"...
Because bothcases() and p_bracket() are static functions in regcomp.c,
there is a real risk of miscompilation if aggressive inlining happens.
The following diff rewrites the "start + count < end" constructs into
"end - start > count". Assuming "end" and "start" are always pointing in
the array (such as "bracket[3]" above), "end - start" is well-defined
and can be compared without trouble.
As a bonus, MORE2() implies MORE() therefore SEETWO() can be simplified
a bit.
Bug report: https://github.com/llvm/llvm-project/issues/47993
Reviewed By: MaskRay, vitalybuka
Differential Revision: https://reviews.llvm.org/D97129
Extend "fallthrough" to allow a third option: "fallback". Fallthrough
allows the original path to used if the redirected (or mapped) path
fails. Fallback is the reverse of this, ie. use the original path and
fallback to the mapped path otherwise.
While this result *can* be achieved today using multiple overlays, this
adds a much more intuitive option. As an example, take two directories
"A" and "B". We would like files from "A" to be used, unless they don't
exist, in which case the VFS should fallback to those in "B".
With the current fallthrough option this is possible by adding two
overlays: one mapping from A -> B and another mapping from B -> A. Since
the frontend *nests* the two RedirectingFileSystems, the result will
be that "A" is mapped to "B" and back to "A", unless it isn't in "A" in
which case it fallsthrough to "B" (or fails if it exists in neither).
Using "fallback" semantics allows a single overlay instead: one mapping
from "A" to "B" but only using that mapping if the operation in "A"
fails first.
"redirect-only" is used to represent the current "fallthrough: false"
case.
Differential Revision: https://reviews.llvm.org/D117937
Lack of AddInteger/AddPointer inlining slows down NodeEquals/Profile/:operator== calls.
Inlining makes FunctionProtoTypes/PointerTypes/ElaboratedTypes/ParenTypes Profile functions faster
but since NodeEquals is still called indirectly through function pointer from FindNodeOrInsertPos
there is room for further inlining improvements.
Extracted from: https://reviews.llvm.org/D118385
Differential Revision: https://reviews.llvm.org/D118610
Add support for the 'pause' hint instruction as an alias for
'fence w, 0'. To do this allow the 'fence' operands pred and succ
to be set to 0 (the empty set). This will also allow future hints
to be encoded as 'fence 0, <x>' and 'fence <x>, 0'.
This patch revised from @mundaym's D93019.
Reviewed By: asb
Differential Revision: https://reviews.llvm.org/D117789
See:
https://green.lab.llvm.org/green/view/LLDB/job/lldb-cmake/40636/consoleFull#-39956214149ba4694-19c4-4d7e-bec5-911270d8a58c
```
llvm/lib/Support/Valgrind.cpp:37:63: error: missing '#include <stddef.h>'; 'size_t' must be declared before it is used
void llvm::sys::ValgrindDiscardTranslations(const void *Addr, size_t Len) {
^
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/lib/clang/13.0.0/include/stddef.h:46:23: note: declaration here is not visible
typedef __SIZE_TYPE__ size_t;
^
1 error generated.
```
rdar://88049280
We do support building with a default target unspecified. This fixes
two small build issues that prevented LLVM's unit tests from building
and libSupport from building on Windows.
The spec doesn't seem to be written as if Zfh implies Zfhmin. They
seem to be separate extensions.
This patch moves the instructions from Zfhmin to be enabled with
either the Zfh or Zfhmin extensions.
Reviewed By: achieveartificialintelligence
Differential Revision: https://reviews.llvm.org/D118581
This moves the dependency of several files on include/llvm/ADT/STLExtras.h to
the much shorter llvm/ADT/STLArrayExtras.h
Differential Revision: https://reviews.llvm.org/D118342
Exts is a map of keyed by std::string with a extension info as
a value. Making copies of this wouldn't be cheap.
We had a mix of references and copies. This makes everything
consistently use a const reference to make it clear we aren't
modifying it.
Differential Revision: https://reviews.llvm.org/D118326
Following up on commit 177176f75c, if we
failed to setDeleteDisposition(true) during TempFile creation, then
don't try to setDeleteDisposition(false) during TempFile::keep, since it
will likely fail as well.
Instead of letting TempFile::keep just fail, we should let it go ahead
and try renaming the file.
This fixes an issue we are seeing when running clang-cl.exe through the
Incredibuild distributed build system. We're seeing that renaming
temporary object files would fail here:
5c1f7b296a/clang/lib/Frontend/CompilerInstance.cpp (L789)
Reviewed By: mstorsjo
Differential Revision: https://reviews.llvm.org/D118212
This reverts commit ef82063207.
- It conflicts with the existing llvm::size in STLExtras, which will now
never be called.
- Calling it without llvm:: breaks C++17 compat
This commit 75e164f61d removed the AutoConvert.h header causing a build break on z/OS. This patch adds it back to fix it.
Reviewed By: zibi
Differential Revision: https://reviews.llvm.org/D118129
LLVM Programmer’s Manual strongly discourages the use of `std::vector<bool>` and suggests `llvm::BitVector` as a possible replacement.
This patch replaces the use of `std::vector` with `llvm::BitVector` in LLVM's YAML traits and replaces the call to `Vec.insert(Vec.begin(), N, false)` on empty `Vec` with `Vec.resize(N)`, which has the same semantics but avoids using `insert` and iterators, which `llvm::BitVector` doesn't possess.
Reviewed By: dexonsmith, dblaikie
Differential Revision: https://reviews.llvm.org/D118111
A few more forward-declarations, a few less headers. the impact on number of
preprocessed lines for LLVMSupport is negligible (-3K lines) but it's always
good to remove dependencies.
Related discourse thread: https://llvm.discourse.group/t/include-what-you-use-include-cleanup
Only using that change in StringRef already decreases the number of
preoprocessed lines from 7837621 to 7776151 for LLVMSupport
Perhaps more interestingly, it shows that many files were relying on the
inclusion of StringRef.h to have the declaration from STLExtras.h. This
patch tries hard to patch relevant part of llvm-project impacted by this
hidden dependency removal.
Potential impact:
- "llvm/ADT/StringRef.h" no longer includes <memory>,
"llvm/ADT/Optional.h" nor "llvm/ADT/STLExtras.h"
Related Discourse thread:
https://llvm.discourse.group/t/include-what-you-use-include-cleanup/5831
This patch adds support for zbkx extension from K extension(v1.0.0) in MC layer.
Instructions with same functionality and same encoding is defined in the bitmanip extension.
It defines {Xperm8, Xperm4} as instruction aliases for xperm.* in Zbp extension. When Zbkx is enabled while Zbp is not, xperm.h will not be available. When Zbkx and Zbp are both enabled, the instructions will be decoded in Zbp format.
[[ https://reviews.llvm.org/D94999 | D94999 ]] this is the patch that introduces xperm.* instructions.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D117889
According to the spec, there are some difference between V and Zve64d. For example, the vmulh integer multiply variants that return the high word of the product (vmulh.vv, vmulh.vx, vmulhu.vv, vmulhu.vx, vmulhsu.vv, vmulhsu.vx) are not included for EEW=64 in Zve64*, but V extension does support these instructions. So we should decouple Zve* extensions and the V extension.
Differential Revision: https://reviews.llvm.org/D117854
This commit is currently implementing supports for scalar cryptography extension for LLVM according to version v1.0.0 of [K Ext specification](https://github.com/riscv/riscv-crypto/releases)(scala crypto has been ratified already). Currently, we are implementing the MC (Machine Code) layer of his extension and the majority of work is done under `llvm/lib/Target/RISCV` directory. There are also some test files in `llvm/test/MC/RISCV` directory.
Remove the subfeature of Zbk* which conflict with b extensions to reduce the size of the patch.
(Zbk* will be resubmit after this patch has been merged)
**Co-author：**@ksyx & @VincentWu & @lihongliang & @achieveartificialintelligence
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D98136
* Merge parallel_for_each into parallelForEach (this removes 1 `Fn(...)` call)
* Change parallelForEach to use parallelForEachN
* Move parallelForEachN into Parallel.cpp
My x86-64 `lld` executable is 100KiB smaller.
No noticeable difference in performance.
Reviewed By: lattner
Differential Revision: https://reviews.llvm.org/D117510
Looks like e9211e0393 unfortunately broke the sanitizer build bots,
because those bots compile the symbolizer with DLLVM_ENABLE_THREADS=Off.
Likely, before the patch, this header was transitively included.
The tryLockFor method from raw_fd_sotreamis the sole user of that
header, and it's not referenced in the mono repo. I still chose to keep
it (may be useful for downstream user) but added a transient type that's
forward declared to hold the duration parameter.
Notable changes:
- "llvm/Support/Duration.h" must be included in order to use tryLockFor.
- "llvm/Support/raw_ostream.h" no longer includes <chrono>
This sole change has an interesting impact on the number of processed
line, as measured by:
clang++ -E -Iinclude -I../llvm/include ../llvm/lib/Support/*.cpp -std=c++14 -fno-rtti -fno-exceptions | wc -l
before: 7917500
after: 7835142
Discourse thread on the topic: https://llvm.discourse.group/t/include-what-you-use-include-cleanup/5831
The cleanup was manual, but assisted by "include-what-you-use". It consists in
1. Removing unused forward declaration. No impact expected.
2. Removing unused headers in .cpp files. No impact expected.
3. Removing unused headers in .h files. This removes implicit dependencies and
is generally considered a good thing, but this may break downstream builds.
I've updated llvm, clang, lld, lldb and mlir deps, and included a list of the
modification in the second part of the commit.
4. Replacing header inclusion by forward declaration. This has the same impact
as 3.
Notable changes:
- llvm/Support/TargetParser.h no longer includes llvm/Support/AArch64TargetParser.h nor llvm/Support/ARMTargetParser.h
- llvm/Support/TypeSize.h no longer includes llvm/Support/WithColor.h
- llvm/Support/YAMLTraits.h no longer includes llvm/Support/Regex.h
- llvm/ADT/SmallVector.h no longer includes llvm/Support/MemAlloc.h nor llvm/Support/ErrorHandling.h
You may need to add some of these headers in your compilation units, if needs be.
As an hint to the impact of the cleanup, running
clang++ -E -Iinclude -I../llvm/include ../llvm/lib/Support/*.cpp -std=c++14 -fno-rtti -fno-exceptions | wc -l
before: 8000919 lines
after: 7917500 lines
Reduced dependencies also helps incremental rebuilds and is more ccache
friendly, something not shown by the above metric :-)
Discourse thread on the topic: https://llvm.discourse.group/t/include-what-you-use-include-cleanup/5831
This commit add instructions supports of `zbkb` which defined in scalar cryptography extension version v1.0.0 (has been ratified already).
Most of the zbkb directives reuse parts of the zbp and zbb directives, so this patch just modified some of the inst aliases and predicates.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D117640
This string no longer appears in the Vector Extension specification.
The segment load/store instructions are just part of the vector
instruction set.
Reviewed By: asb
Differential Revision: https://reviews.llvm.org/D117724
This change defers creating Support/Caching.cpp's cache directory until
it actually writes to the cache.
This allows using Caching library in a read-only fashion. If read-only,
the cache is guaranteed not to write to disk. This keeps tools using
DebugInfod (currently llvm-symbolizer) hermetic when not configured to
perform remote lookups.
Reviewed By: phosek
Differential Revision: https://reviews.llvm.org/D117589
Miod Vallat