This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
InlineCostCallAnalyzer encourages inlining of the last call to the
static function by subtracting LastCallToStaticBonus from Cost.
This patch introduces getStaticBonusApplied to make available the
amount of LastCallToStaticBonus applied.
The intent is to allow the module inliner to determine whether
inlining a given call site is expected to reduce the caller size with
an expression like:
IC.getCost() + IC.getStaticBonusApplied() < 0
This patch does not add a use of getStaticBonus yet.
Differential Revision: https://reviews.llvm.org/D134373
We check to see if a given CallBase is a sole call to a local function
at multiple places in InlineCost.cpp. This patch factors out the
common code.
Differential Revision: https://reviews.llvm.org/D134114
* Replace getUserCost with getInstructionCost, covering all cost kinds.
* Remove getInstructionLatency, it's not implemented by any backends, and we should fold the functionality into getUserCost (now getInstructionCost) to make it easier for targets to handle the cost kinds with their existing cost callbacks.
Original Patch by @samparker (Sam Parker)
Differential Revision: https://reviews.llvm.org/D79483
The value of the attribute is a size in bytes. It has the effect of
suppressing inlining of functions whose stacksizes exceed the given value.
Reviewed By: mtrofin
Differential Revision: https://reviews.llvm.org/D129904
For recursive callers, we want to be conservative when inlining callees with large stack size. We currently have a limit `InlineConstants::TotalAllocaSizeRecursiveCaller`, but that is hard coded.
We found the current limit insufficient to suppress problematic inlining that bloats stack size for deep recursion. This change adds a switch to make the limit tunable as a mitigation.
Differential Revision: https://reviews.llvm.org/D129411
Use a common ConstantFoldInstOperands-based constant folding
implementation, instead of specifying the folding function for
each function individually. Going through the generic handling
doesn't appear to have any significant compile-time impact.
As the test change shows, this is not NFC, because we now use
DataLayout-aware constant folding, which can do slightly better
in some cases (e.g. those involving GEPs).
This removes the extractvalue constant expression, as part of
https://discourse.llvm.org/t/rfc-remove-most-constant-expressions/63179.
extractvalue is already not supported in bitcode, so we do not need
to worry about bitcode auto-upgrade.
Uses of ConstantExpr::getExtractValue() should be replaced with
IRBuilder::CreateExtractValue() (if the fact that the result is
constant is not important) or ConstantFoldExtractValueInstruction()
(if it is). Though for this particular case, it is also possible
and usually preferable to use getAggregateElement() instead.
The C API function LLVMConstExtractValue() is removed, as the
underlying constant expression no longer exists. Instead,
LLVMBuildExtractValue() should be used (which will constant fold
or create an instruction). Depending on the use-case,
LLVMGetAggregateElement() may also be used instead.
Differential Revision: https://reviews.llvm.org/D125795
The hidden option max-inline-stacksize=<N> prevents the inlining of functions
with a stack size larger than N.
Reviewed By: mtrofin, aeubanks
Differential Review: https://reviews.llvm.org/D127988
Clang-format InstructionSimplify and convert all "FunctionName"s to
"functionName". This patch does touch a lot of files but gets done with
the cleanup of InstructionSimplify in one commit.
This is the alternative to the less invasive clang-format only patch: D126783
Reviewed By: spatel, rengolin
Differential Revision: https://reviews.llvm.org/D126889
Some cl::ZeroOrMore were added to avoid the `may only occur zero or one times!`
error. More were added due to cargo cult. Since the error has been removed,
cl::ZeroOrMore is unneeded.
Also remove cl::init(false) while touching the lines.
This patch set LastCallToStaticBonus based on check, it has
no noticeable size reduction on an internal workload and linux kernel
with Os/Oz.
Differential Revision: https://reviews.llvm.org/D124233
Retain the behavior we get without opaque pointers: A call to a
known function with different function type is considered an
indirect call.
This fixes the crash reported in https://reviews.llvm.org/D123300#3444772.
Prior to this change, CallBase::hasFnAttr checked the called function to
see if it had an attribute if it wasn't set on the CallBase, but
getFnAttr didn't do the same delegation, which led to very confusing
behavior. This patch fixes the issue by making CallBase::getFnAttr also
check the function under the same circumstances.
Test changes look (to me) like they're cleaning up redundant attributes
which no longer get specified both on the callee and call. We also clean
up the one ad-hoc implementation of this getter over in InlineCost.cpp.
Differential Revision: https://reviews.llvm.org/D122821
This patch adds a CL option for avoiding the attribute compatibility
check between caller and callee in TTI. TTI attribute compatibility
checks for target CPU and target features.
In our downstream compiler, this attribute always remains the same
between callee and caller. By avoiding the addition of this attribute to
each of our inline candidate (and then checking them here during inline
cost), we save some compile time.
The option is kept false, so this change is an NFC upstream.
Introduce a new attribute "function-inline-cost-multiplier" which
multiplies the inline cost of a call site (or all calls to a callee) by
the multiplier.
When processing the list of calls created by inlining, check each call
to see if the new call's callee is in the same SCC as the original
callee. If so, set the "function-inline-cost-multiplier" attribute of
the new call site to double the original call site's attribute value.
This does not happen when the original call site is intra-SCC.
This is an alternative to D120584, which marks the call sites as
noinline.
Hopefully fixes PR45253.
Reviewed By: davidxl
Differential Revision: https://reviews.llvm.org/D121084
Since 26c6a3e736, LLVM's inliner will "upgrade" the caller's stack protector
attribute based on the callee. This lead to surprising results with Clang's
no_stack_protector attribute added in 4fbf84c173 (D46300). Consider the
following code compiled with clang -fstack-protector-strong -Os
(https://godbolt.org/z/7s3rW7a1q).
extern void h(int* p);
inline __attribute__((always_inline)) int g() {
return 0;
}
int __attribute__((__no_stack_protector__)) f() {
int a[1];
h(a);
return g();
}
LLVM will inline g() into f(), and f() would get a stack protector, against the
users explicit wishes, potentially breaking the program e.g. if h() changes the
value of the stack cookie. That's a miscompile.
More recently, bc044a88ee (D91816) addressed this problem by preventing
inlining when the stack protector is disabled in the caller and enabled in the
callee or vice versa. However, the problem remained if the callee is marked
always_inline as in the example above. This affected users, see e.g.
http://crbug.com/1274129 and http://llvm.org/pr52886.
One way to fix this would be to prevent inlining also in the always_inline
case. Despite the name, always_inline does not guarantee inlining, so this
would be legal but potentially surprising to users.
However, I think the better fix is to not enable the stack protector in a
caller based on the callee. The motivation for the old behaviour is unclear, it
seems counter-intuitive, and causes real problems as we've seen.
This commit implements that fix, which means in the example above, g() gets
inlined into f() (also without always_inline), and f() is emitted without stack
protector. I think that matches most developers' expectations, and that's also
what GCC does.
Another effect of this change is that a no_stack_protector function can now be
inlined into a stack protected function, e.g. (https://godbolt.org/z/hafP6W856):
extern void h(int* p);
inline int __attribute__((__no_stack_protector__)) __attribute__((always_inline)) g() {
return 0;
}
int f() {
int a[1];
h(a);
return g();
}
I think that's fine. Such code would be unusual since no_stack_protector is
normally applied to a program entry point which sets up the stack canary. And
even if such code exists, inlining doesn't change the semantics: there is still
no stack cookie setup/check around entry/exit of the g() code region, but there
may be in the surrounding context, as there was before inlining. This also
matches GCC.
See also the discussion at https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94722
Differential revision: https://reviews.llvm.org/D116589
ProfileCount could model invalid values, but a user had no indication
that the getCount method could return bogus data. Optional<ProfileCount>
addresses that, because the user must dereference the optional. In
addition, the patch removes concept duplication.
Differential Revision: https://reviews.llvm.org/D113839
Fix a bug when getInlineCost incorrectly returns a
cost/threshold pair instead of an explicit never inline.
Reviewed By: mtrofin
Differential Revision: https://reviews.llvm.org/D111687
This patch continues unblocking optimizations that are blocked by pseudo probe instrumentation.
Not exactly like DbgIntrinsics, PseudoProbe intrinsic has other attributes (such as mayread, maywrite, mayhaveSideEffect) that can block optimizations. The issues fixed are:
- Flipped default param of getFirstNonPHIOrDbg API to skip pseudo probes
- Unblocked CSE by avoiding pseudo probe from clobbering memory SSA
- Unblocked induction variable simpliciation
- Allow empty loop deletion by treating probe intrinsic isDroppable
- Some refactoring.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D110847
llvm.is.constant* intrinsics are evaluated to 0 or 1 integral values.
A common use case for llvm.is.constant comes from the higher level
__builtin_constant_p. A common usage pattern of __builtin_constant_p in
the Linux kernel is:
void foo (int bar) {
if (__builtin_constant_p(bar)) {
// lots of code that will fold away to a constant.
} else {
// a little bit of code, usually a libcall.
}
}
A minor issue in InlineCost calculations is when `bar` is _not_ Constant
and still will not be after inlining, we don't discount the true branch
and the inline cost of `foo` ends up being the cost of both branches
together, rather than just the false branch.
This leads to code like the above where inlining will not help prove bar
Constant, but it still would be beneficial to inline foo, because the
"true" branch is irrelevant from a cost perspective.
For example, IPSCCP can sink a passed constant argument to foo:
const int x = 42;
void bar (void) { foo(x); }
This improves our inlining decisions, and fixes a few head scratching
cases were the disassembly shows a relatively small `foo` not inlined
into a lone caller.
We could further improve this modeling by tracking whether the argument
to llvm.is.constant* is a parameter of the function, and if inlining
would allow that parameter to become Constant. This idea is noted in a
FIXME comment.
Link: https://github.com/ClangBuiltLinux/linux/issues/1302
Reviewed By: kazu
Differential Revision: https://reviews.llvm.org/D111272
This renames the primary methods for creating a zero value to `getZero`
instead of `getNullValue` and renames predicates like `isAllOnesValue`
to simply `isAllOnes`. This achieves two things:
1) This starts standardizing predicates across the LLVM codebase,
following (in this case) ConstantInt. The word "Value" doesn't
convey anything of merit, and is missing in some of the other things.
2) Calling an integer "null" doesn't make any sense. The original sin
here is mine and I've regretted it for years. This moves us to calling
it "zero" instead, which is correct!
APInt is widely used and I don't think anyone is keen to take massive source
breakage on anything so core, at least not all in one go. As such, this
doesn't actually delete any entrypoints, it "soft deprecates" them with a
comment.
Included in this patch are changes to a bunch of the codebase, but there are
more. We should normalize SelectionDAG and other APIs as well, which would
make the API change more mechanical.
Differential Revision: https://reviews.llvm.org/D109483
When preinliner is used for CSSPGO, we try to honor global preinliner decision as much as we can except for uninlinable callees. We rely on InlineCost::Never to prevent us from illegal inlining.
However, it turns out that we use InlineCost::Never for both illeagle inlining and some of the "not-so-beneficial" inlining.
The most common one is recursive inlining, while it can bloat size a lot during CGSCC bottom-up inlining, it's less of a problem when recursive inlining is guided by profile and done in top-down manner.
Ideally it'd be better to have a clear separation between inline legality check vs cost-benefit check, but that requires a bigger change.
This change enables InlineCost computation to allow inlining recursive calls, controlled by InlineParams. In SampleLoader, we now enable recursive inlining for CSSPGO when global preinliner decision is used.
With this change, we saw a few perf improvements on SPEC2017 with CSSPGO and preinliner on: 2% for povray_r, 6% for xalancbmk_s, 3% omnetpp_s, while size is about the same (no noticeable perf change for all other benchmarks)
Differential Revision: https://reviews.llvm.org/D109104
This patch introduces four new string attributes: function-inline-cost,
function-inline-threshold, call-inline-cost and call-threshold-bonus.
These attributes allow you to selectively override some aspects of
InlineCost analysis. That would allow us to test inliner separately from
the InlineCost analysis.
That could be useful when you're trying to write tests for inliner and
you need to test some very specific situation, like "the inline cost has
to be this high", or "the threshold has to be this low". Right now every
time someone does that, they have get creative to come up with a way to
make the InlineCost give them the number they need (like adding ~30
load/add pairs for a trivial test). This process can be somewhat tedious
which can discourage some people from writing enough tests for their
changes. Also, that results in tests that are fragile and can be easily
broken without anyone noticing it because the test writer can't
explicitly control what input the inliner will get from the inline cost
analysis.
These new attributes will alleviate those problems to an extent.
Reviewed By: mtrofin
Differential Revision: https://reviews.llvm.org/D109033
Tests with multiple benchmarks, like Embench [1], showed that the
CallPenalty magic number has the most influence on inlining decisions
when optimizing for size.
On the other hand, there was no good default value for this parameter.
Some benchmarks profited strongly from a reduced call penalty. On
example is the picojpeg benchmark compiled for RISC-V, which got 6%
smaller with a CallPenalty of 10 instead of 12. Other benchmarks
increased in size, like matmult.
This commit makes the compromise of turning the magic number constant of
CallPenalty into a configurable value. This introduces the flag
`--inline-call-penalty`. With that flag users can fine tune the inliner
to their needs.
The CallPenalty constant was also used for loops. This commit replaces
the CallPenalty constant with a new LoopPenalty constant that is now
used instead.
This is a slimmed down version of https://reviews.llvm.org/D30899
[1]: https://github.com/embench/embench-iot
Differential Revision: https://reviews.llvm.org/D105976
Kazu Hirata