When a flat CS profile is converted to a nested profile, the call target samples for inlined callee contexts are left over in the callsite target map. This could cause indirect call promotion to function improperly. One issue is that the inlined callsites are treated with double amount of samples. The other is the inlined callsites are reconsidered for subsequent PGO ICP.
I'm fixing this by excluding call targets from the callsite for inlined targets. While fixing this I found that callsite target sum and the number of body samples for that callsite could be mismatched. {D122609} has an explanation and a fix for that on llvm-profgen side. For now I'm tolerating it in this change.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D125266
Recent experiments with our two large internal services showed that duplicating context profiles into base profile caused code size inflation and didn't deliver good performance compared to no such duplication. It was a trick we made to catch up with the CS flat profile and I'm now turning it off by default.
The code size inflation mainly comes from the enriched based profiles. A base profile for a function represents the uninlined (or outlined) portion of the whole function running time. Such portion could be very small if a function is inlined into most of its hot callsites. Duplicating context profiles of the function into its base profiles could cause the outlined body to be hot enough and in turn get many of its callees inlined, thus increases the code size. The size inflation could further cause perf regression.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D124796
To be more clear and definitive, I'm renaming `ProfileIsCSFlat` back to `ProfileIsCS` which stands for full context-sensitive flat profiles. `ProfileIsCSNested` is now renamed to `ProfileIsPreInlined` and is extended to be applicable for CS flat profiles too. More specifically, `ProfileIsPreInlined` is for any kind of profiles (flat or nested) that contain 'ShouldBeInlined' contexts. The flag is encoded in the profile summary section for extbinary profiles and is computed on-the-fly for text profiles.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D122602
With a sufficiently large output buffer, the only failure is Z_MEM_ERROR.
Check it and call the noreturn report_bad_alloc_error if applicable.
resize_for_overwrite may call report_bad_alloc_error as well.
Now that there is no other error type, we can replace the return type with void
and simplify call sites.
Reviewed By: ikudrin
Differential Revision: https://reviews.llvm.org/D121512
When generating nested CS profile with all calling contexts of a function duplicated into a base profile under `--generate-merged-base-profiles`, do not recount callee samples when computing profile summary. This fixes the profile summary mismatch between flat cs profile and nested cs profile, for both extbinary and text format.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D119494
For some reason, the user-defined implicit conversion from StringRef to
std::string is not invoked by std::map::emplace in libstdc++ 5.4.0, even
though it works fine on modern systems.
CSSPGO currently employs a flat profile format for context-sensitive profiles. Such a flat profile allows for precisely manipulating contexts that is either inlined or not inlined. This is a benefit over the nested profile format used by non-CS AutoFDO. A downside of this is the longer build time due to parsing the indexing the full CS contexts.
For a CS flat profile, though only the context profiles relevant to a module are loaded when that module is compiled, the cost to figure out what profiles are relevant is noticeably high when there're many contexts, since the sample reader will need to scan all context strings anyway. On the contrary, a nested function profile has its related inline subcontexts isolated from other unrelated contexts. Therefore when compiling a set of functions, unrelated contexts will never need to be scanned.
In this change we are exploring using nested profile format for CSSPGO. This is expected to work based on an assumption that with a preinliner-computed profile all contexts are precomputed and expected to be inlined by the compiler. Contexts not expected to be inlined will be cut off and returned to corresponding base profiles (for top-level outlined functions). This naturally forms a nested profile where all nested contexts are expected to be inlined. The compiler will less likely optimize on derived contexts that are not precomputed.
A CS-nested profile will look exactly the same with regular nested profile except that each nested profile can come with an attributes. With pseudo probes, a nested profile shown as below can also have a CFG checksum.
```
main:1968679:12
2: 24
3: 28 _Z5funcAi:18
3.1: 28 _Z5funcBi:30
3: _Z5funcAi:1467398
0: 10
1: 10 _Z8funcLeafi:11
3: 24
1: _Z8funcLeafi:1467299
0: 6
1: 6
3: 287884
4: 287864 _Z3fibi:315608
15: 23
!CFGChecksum: 138828622701
!Attributes: 2
!CFGChecksum: 281479271677951
!Attributes: 2
```
Specific work included in this change:
- A recursive profile converter to convert CS flat profile to nested profile.
- Extend function checksum and attribute metadata to be stored in nested way for text profile and extbinary profile.
- Unifiy sample loader inliner path for CS and preinlined nested profile.
- Changes in the sample loader to support probe-based nested profile.
I've seen promising results regarding build time. A nested profile can result in a 20% shorter build time than a CS flat profile while keep an on-par performance. This is with -duplicate-contexts-into-base=1.
Test Plan:
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D115205
When linkage name isn't available in dwarf (ususally the case of C code), looking up callee samples should be based on the dwarf name instead of using an empty string.
Also fixing a test issue where using empty string to look up callee samples accidentally returns the correct samples because it is treated as indirect call.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D112948
Adding support to the CS preinliner to trim cold base profiles. This makes trimming consistent with the inline decision made by the preinliner. Also disable the existing profile merger when preinliner is on unless explicitly specified.
Reviewed By: wenlei, wlei
Differential Revision: https://reviews.llvm.org/D112489
Currently context strings contain a lot of duplicated function names and that significantly increase the profile size. This change split the context into a series of {name, offset, discriminator} tuples so function names used in the context can be replaced by the index into the name table and that significantly reduce the size consumed by context.
A follow-up improvement made in the compiler and profiling tools is to avoid reconstructing full context strings which is time- and memory- consuming. Instead a context vector of `StringRef` is adopted to represent the full context in all scenarios. As a result, the previous prevalent profile map which was implemented as a `StringRef` is now engineered as an unordered map keyed by `SampleContext`. `SampleContext` is reshaped to using an `ArrayRef` to represent a full context for CS profile. For non-CS profile, it falls back to use `StringRef` to represent a contextless function name. Both the `ArrayRef` and `StringRef` objects are underpinned by real array and string objects that are stored in producer buffers. For compiler, they are maintained by the sample reader. For llvm-profgen, they are maintained in `ProfiledBinary` and `ProfileGenerator`. Full context strings can be generated only in those cases of debugging and printing.
When it comes to profile format, nothing has changed to the text format, though internally CS context is implemented as a vector. Extbinary format is only changed for CS profile, with an additional `SecCSNameTable` section which stores all full contexts logically in the form of `vector<int>`, which each element as an offset points to `SecNameTable`. All occurrences of contexts elsewhere are redirected to using the offset of `SecCSNameTable`.
Testing
This is no-diff change in terms of code quality and profile content (for text profile).
For our internal large service (aka ads), the profile generation is cut to half, with a 20x smaller string-based extbinary format generated.
The compile time of ads is dropped by 25%.
Differential Revision: https://reviews.llvm.org/D107299
Sample profiles are stored in a string map which is basically an unordered map. Printing out profiles by simply walking the string map doesn't enforce an order. I'm sorting the map in the decreasing order of total samples to enable a more stable dump, which is good for comparing two dumps.
Reviewed By: wenlei, wlei
Differential Revision: https://reviews.llvm.org/D108147
We were using a `StringMap` object to store all profiles to be emitted. The object is basically an unordered hash table, therefore updating it in the process of trasvering it may cause issue since the underlying bucket array could change.
I'm also moving the `csspgo-preinliner` switch around so that no context tri will be constructed (by the constructor of `CSPreInliner`) when the switch is off.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D104267
Previously dangling samples were represented by INT64_MAX in sample profile while probes never executed were not reported. This was based on an observation that dangling probes were only at a smaller portion than zero-count probes. However, with compiler optimizations, dangling probes end up becoming at large portion of all probes in general and reporting them does not make sense from profile size point of view. This change flips sample reporting by reporting zero-count probes instead. This enabled dangling probe to be represented by none (missing entry in profile). This has a couple benefits:
1. Reducing sample profile size in optimize mode, even when the number of non-executed probes outperform the number of dangling probes, since INT64_MAX takes more space over 0 to encode.
2. Binary size savings. No need to encode dangling probe anymore, since missing probes are treated as dangling in the profile reader.
3. Reducing compiler work to track dangling probes. However, for probes that are real dead and removed, we still need the compiler to identify them so that they can be reported as zero-count, instead of mistreated as dangling probes.
4. Improving counts quality by respecting the counts already collected on the non-dangling copy of a probe. A probe, when duplicated, gets two copies at runtime. If one of them is dangling while the other is not, merging the two probes at profile generation time will cause the real samples collected on the non-dangling one to be discarded. Not reporting the dangling counterpart will keep the real samples.
5. Better readability.
6. Be consistent with non-CS dwarf line number based profile. Zero counts are trusted by the compiler counts inferencer while missing counts will be inferred by the compiler.
Note that the current patch does include any work for #3. There will be follow-up changes.
For #1, I've seen for a large Facebook service, the text profile is reduced by 7%. For extbinary profile, the size of LBRProfileSection is reduced by 35%.
For #4, I have seen general counts quality for SPEC2017 is improved by 10%.
Reviewed By: wenlei, wlei, wmi
Differential Revision: https://reviews.llvm.org/D104129
This change provides the option to merge and aggregate cold context by the last k frames instead of context-less name. By default K = 1 means the context-less one.
This is for better perf tuning. The more selective merging and trimming will rely on llvm-profgen's preinliner.
Reviewed By: wenlei, hoy
Differential Revision: https://reviews.llvm.org/D104131
This patch was split from https://reviews.llvm.org/D102246
[SampleFDO] New hierarchical discriminator for Flow Sensitive SampleFDO
This is mainly for ProfileData part of change. It will load
FS Profile when such profile is detected. For an extbinary format profile,
create_llvm_prof tool will add a flag to profile summary section.
For other format profiles, the users need to use an internal option
(-profile-isfs) to tell the compiler that the profile uses FS discriminators.
This patch also simplified the bit API used by FS discriminators.
Differential Revision: https://reviews.llvm.org/D103041
This patch fixed the following issues along side with some refactoring:
1. Fix bugs where StringRef for context string out live the underlying std::string. We now keep string table in profile generator to hold std::strings. We also do the same for bracketed context strings in profile writer.
2. Make sure profile output strictly follow (total sample, name) order. Previously, there's inconsistency between ProfileMap's key and FunctionSamples's name, leading to inconsistent ordering. This is now fixed by introducing context profile canonicalization. Assertions are also added to make sure ProfileMap's key and FunctionSamples's name are always consistent.
3. Enhanced error handling for profile writing to make sure we bubble up errors properly for both llvm-profgen and llvm-profdata when string table is not populated correctly for extended binary profile.
4. Keep all internal context representation bracket free. This avoids creating new strings for context trimming, merging and preinline. getNameWithContext API is now simplied accordingly.
5. Factor out the code for context trimming and merging into SampleContextTrimmer in SampleProf.cpp. This enables llvm-profdata to use the trimmer when merging profiles. Changes in llvm-profgen will be in separate patch.
Differential Revision: https://reviews.llvm.org/D100090
now -funique-internal-linkage-name flag is available, and we want to flip
it on by default since it is beneficial to have separate sample profiles
for different internal symbols with the same name. As a preparation, we
want to avoid regression caused by the flip.
When we flip -funique-internal-linkage-name on, the profile is collected
from binary built without -funique-internal-linkage-name so it has no uniq
suffix, but the IR in the optimized build contains the suffix. This kind of
mismatch may introduce transient regression.
To avoid such mismatch, we introduce a NameTable section flag indicating
whether there is any name in the profile containing uniq suffix. Compiler
will decide whether to keep uniq suffix during name canonicalization
depending on the NameTable section flag. The flag is only available for
extbinary format. For other formats, by default compiler will keep uniq
suffix so they will only experience transient regression when
-funique-internal-linkage-name is just flipped.
Another type of regression is caused by places where we miss to call
getCanonicalFnName. Those places are fixed.
Differential Revision: https://reviews.llvm.org/D96932
Dangling probes are the probes associated to an empty block. This usually happens when all real instructions are optimized away from the block. There is a problem with dangling probes during the offline counts processing. The way the sample profiler works is that samples collected on the first physical instruction following a probe will be counted towards the probe. This logically equals to treating the instruction next to a probe as if it is from the same block of the probe. In the dangling probe case, the real instruction following a dangling probe actually starts a new block, and samples collected on the new block may cause issues when counted towards the empty block.
To mitigate this issue, we first try to move around a dangling probe inside its owning block. If there are still native instructions preceding the probe in the same block, we can then use them as a place holder to collect samples for the probe. A pass is added to walk each block backwards looking for probes not followed by any real instruction and moving them before the first real instruction. This is done right before the object emission.
If we are unlucky to find such in-block preceding instructions for a probe, the solution we are taking is to tag such probe as dangling so that the samples reported for them will not be trusted by the compiler. We leave it up to the counts inference algorithm to get such probes a reasonable count. The number `UINT64_MAX` is used to mark sample count as collected for a dangling probe.
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D95962
into profile symbol list.
When test is unrepresentative to production behavior, sample profile
collected from production can cause unexpected performance behavior
in test. To triage such issue, it is useful to have a cutoff flag
to control how many symbols will be included into profile symbol list
in order to do binary search.
Differential Revision: https://reviews.llvm.org/D97623
This change enables pseudo-probe-based sample counts to be consumed by the sample profile loader under the regular `-fprofile-sample-use` switch with minimal adjustments to the existing sample file formats. After the counts are imported, a probe helper, aka, a `PseudoProbeManager` object, is automatically launched to verify the CFG checksum of every function in the current compilation against the corresponding checksum from the profile. Mismatched checksums will cause a function profile to be slipped. A `SampleProfileProber` pass is scheduled before any of the `SampleProfileLoader` instances so that the CFG checksums as well as probe mappings are available during the profile loading time. The `PseudoProbeManager` object is set up right after the profile reading is done. In the future a CFG-based fuzzy matching could be done in `PseudoProbeManager`.
Samples will be applied only to pseudo probe instructions as well as probed callsites once the checksum verification goes through. Those instructions are processed in the same way that regular instructions would be processed in the line-number-based scenario. In other words, a function is processed in a regular way as if it was reduced to just containing pseudo probes (block probes and callsites).
**Adjustment to profile format **
A CFG checksum field is being added to the existing AutoFDO profile formats. So far only the text format and the extended binary format are supported. For the text format, a new line like
```
!CFGChecksum: 12345
```
is added to the end of the body sample lines. For the extended binary profile format, we introduce a metadata section to store the checksum map from function names to their CFG checksums.
Differential Revision: https://reviews.llvm.org/D92347
This change adds the context-senstive sample PGO infracture described in CSSPGO RFC (https://groups.google.com/g/llvm-dev/c/1p1rdYbL93s). It introduced an abstraction between input profile and profile loader that queries input profile for functions. Specifically, there's now the notion of base profile and context profile, and they are managed by the new SampleContextTracker for adjusting and merging profiles based on inline decisions. It works with top-down profiled guided inliner in profile loader (https://reviews.llvm.org/D70655) for better inlining with specialization and better post-inline profile fidelity. In the future, we can also expose this infrastructure to CGSCC inliner in order for it to take advantage of context-sensitive profile. This change is the consumption part of context-sensitive profile (The generation part is in this stack: https://reviews.llvm.org/D89707). We've seen good results internally in conjunction with Pseudo-probe (https://reviews.llvm.org/D86193). Pacthes for integration with Pseudo-probe coming up soon.
Currently the new infrastructure kick in when input profile contains the new context-sensitive profile; otherwise it's no-op and does not affect existing AutoFDO.
**Interface**
There're two sets of interfaces for query and tracking respectively exposed from SampleContextTracker. For query, now instead of simply getting a profile from input for a function, we can explicitly query base profile or context profile for given call path of a function. For tracking, there're separate APIs for marking context profile as inlined, or promoting and merging not inlined context profile.
- Query base profile (`getBaseSamplesFor`)
Base profile is the merged synthetic profile for function's CFG profile from any outstanding (not inlined) context. We can query base profile by function.
- Query context profile (`getContextSamplesFor`)
Context profile is a function's CFG profile for a given calling context. We can query context profile by context string.
- Track inlined context profile (`markContextSamplesInlined`)
When a function is inlined for given calling context, we need to mark the context profile for that context as inlined. This is to make sure we don't include inlined context profile when synthesizing base profile for that inlined function.
- Track not-inlined context profile (`promoteMergeContextSamplesTree`)
When a function is not inlined for given calling context, we need to promote the context profile tree so the not inlined context becomes top-level context. This preserve the sub-context under that function so later inline decision for that not inlined function will still have context profile for its call tree. Note that profile will be merged if needed when promoting a context profile tree if any of the node already exists at its promoted destination.
**Implementation**
Implementation-wise, `SampleContext` is created as abstraction for context. Currently it's a string for call path, and we can later optimize it to something more efficient, e.g. context id. Each `SampleContext` also has a `ContextState` indicating whether it's raw context profile from input, whether it's inlined or merged, whether it's synthetic profile created by compiler. Each `FunctionSamples` now has a `SampleContext` that tells whether it's base profile or context profile, and for context profile what is the context and state.
On top of the above context representation, a custom trie tree is implemented to track and manager context profiles. Specifically, `SampleContextTracker` is implemented that encapsulates a trie tree with `ContextTireNode` as node. Each node of the trie tree represents a frame in calling context, thus the path from root to a node represents a valid calling context. We also track `FunctionSamples` for each node, so this trie tree can serve efficient query for context profile. Accordingly, context profile tree promotion now becomes moving a subtree to be under the root of entire tree, and merge nodes for subtree if this move encounters existing nodes.
**Integration**
`SampleContextTracker` is now also integrated with AutoFDO, `SampleProfileReader` and `SampleProfileLoader`. When we detected input profile contains context-sensitive profile, `SampleContextTracker` will be used to track profiles, and all profile query will go to `SampleContextTracker` instead of `SampleProfileReader` automatically. Tracking APIs are called automatically for each inline decision from `SampleProfileLoader`.
Differential Revision: https://reviews.llvm.org/D90125
and indirect call promotion candidate.
Profile remapping is a feature to match a function in the module with its
profile in sample profile if the function name and the name in profile look
different but are equivalent using given remapping rules. This is a useful
feature to keep the performance stable by specifying some remapping rules
when sampleFDO targets are going through some large scale function signature
change.
However, currently profile remapping support is only valid for outline
function profile in SampleFDO. It cannot match a callee with an inline
instance profile if they have different but equivalent names. We found
that without the support for inline instance profile, remapping is less
effective for some large scale change.
To add that support, before any remapping lookup happens, all the names
in the profile will be inserted into remapper and the Key to the name
mapping will be recorded in a map called NameMap in the remapper. During
name lookup, a Key will be returned for the given name and it will be used
to extract an equivalent name in the profile from NameMap. So with the help
of the NameMap, we can translate any given name to an equivalent name in
the profile if it exists. Whenever we try to match a name in the module to
a name in the profile, we will try the match with the original name first,
and if it doesn't match, we will use the equivalent name got from remapper
to try the match for another time. In this way, the patch can enhance the
profile remapping support for searching inline instance and searching
indirect call promotion candidate.
In a planned large scale change of int64 type (long long) to int64_t (long),
we found the performance of a google internal benchmark degraded by 2% if
nothing was done. If existing profile remapping was enabled, the performance
degradation dropped to 1.2%. If the profile remapping with the current patch
was enabled, the performance degradation further dropped to 0.14% (Note the
experiment was done before searching indirect call promotion candidate was
added. We hope with the remapping support of searching indirect call promotion
candidate, the degradation can drop to 0% in the end. It will be evaluated
post commit).
Differential Revision: https://reviews.llvm.org/D86332
Compbinary format uses MD5 to represent strings in name table. That gives smaller profile without the need of compression/decompression when writing/reading the profile. The patch adds the support in extbinary format. It is off by default but user can choose to enable it.
Note the feature of using MD5 in name table can bring very small chance of name conflict leading to profile mismatch. Besides, profile using the feature won't have the profile remapping support.
Differential Revision: https://reviews.llvm.org/D76255
Previously ExtBinary profile format only supports compression using zlib for
profile symbol list. In this patch, we extend the compression support to any
section. User can select some or all of the sections to compress. In an
experiment, for a 45M profile in ExtBinary format, compressing name table
reduced its size to 24M, and compressing all the sections reduced its size
to 11M.
Differential Revision: https://reviews.llvm.org/D68253
llvm-svn: 373914
1. zlib::compress accept &size_t but the param is an uint64_t.
2. Some systems don't have zlib installed. Don't use compression by default.
llvm-svn: 370564
cold versus function being newly added.
This is the second half of https://reviews.llvm.org/D66374.
Profile symbol list is the collection of function symbols showing up in
the binary which generates the current profile. It is used to discriminate
function being cold versus function being newly added. Profile symbol list
is only added for profile with ExtBinary format.
During profile use compilation, when profile-sample-accurate is enabled,
a function without profile will be regarded as cold only when it is
contained in that list.
Differential Revision: https://reviews.llvm.org/D66766
llvm-svn: 370563
Summary:
StringMap is used for storing call target to frequency map for AutoFDO. However the iterating order of StringMap is non-deterministic, which leads to non-determinism in AutoFDO profile output. Now new API getSortedCallTargets and SortCallTargets are added for deterministic ordering and output.
Roundtrip test for text profile and binary profile is added.
Reviewers: wmi, davidxl, danielcdh
Subscribers: hiraditya, mgrang, llvm-commits, twoh
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66191
llvm-svn: 369440
Summary:
This commit fixed a race condition from multi-threaded thinLTO backends that causes non-deterministic memory corruption for a data structure used only by AutoFDO with compact binary profile.
GUIDToFuncNameMap, a static data member of type DenseMap in FunctionSamples is used as a per-module mapping from function name MD5 to name string when input AutoFDO profile is in compact binary format. However with ThinLTO, we can have parallel backends modifying and accessing the class static map concurrently. The fix is to make GUIDToFuncNameMap a member of SampleProfileLoader instead of a file static data.
Reviewers: wmi, davidxl, danielcdh
Subscribers: mehdi_amini, inglorion, hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65848
llvm-svn: 368596
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
The patch saves a function offset table which maps function name index to the
offset of its function profile to the start of the binary profile. By using
the function offset table, for those function profiles which will not be used
when compiling a module, the profile reader does't have to read them. For
profile size around 10~20M, it saves ~10% compile time.
Differential Revision: https://reviews.llvm.org/D51863
llvm-svn: 342283
The patch tries to make sample profile loader independent of profile format
change. It moves compact format related code into FunctionSamples and
SampleProfileReader classes, and sample profile loader only has to interact
with those two classes and will be unaware of profile format changes.
The cleanup also contain some fixes to further remove the difference between
compactbinary format and binary format. After the cleanup using different
formats originated from the same profile will generate the same binaries,
which we verified by compiling two large server benchmarks w/wo thinlto.
Differential Revision: https://reviews.llvm.org/D51643
llvm-svn: 341591
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
Summary:
Exposing getOffset and findFunctionSamples as members of
SampleProfile. They are intimately tied to design choices of the
sample profile format - using offsets instead of line numbers, and
traversing inlined functions stack, respectively.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43605
llvm-svn: 325747
Summary:
Add LLVM_FORCE_ENABLE_DUMP cmake option, and use it along with
LLVM_ENABLE_ASSERTIONS to set LLVM_ENABLE_DUMP.
Remove NDEBUG and only use LLVM_ENABLE_DUMP to enable dump methods.
Move definition of LLVM_ENABLE_DUMP from config.h to llvm-config.h so
it'll be picked up by public headers.
Differential Revision: https://reviews.llvm.org/D38406
llvm-svn: 315590
Summary: For iterative SamplePGO, an indirect call can be speculatively promoted to multiple direct calls and get inlined. All these promoted direct calls will share the same callsite location (offset+discriminator). With the current implementation, we cannot distinguish between different promotion candidates and its inlined instance. This patch adds callee_name to the key of the callsite sample map. And added helper functions to get all inlined callee samples for a given callsite location. This helps the profile annotator promote correct targets and inline it before annotation, and ensures all indirect call targets to be annotated correctly.
Reviewers: davidxl, dnovillo
Reviewed By: davidxl
Subscribers: andreadb, llvm-commits
Differential Revision: https://reviews.llvm.org/D31950
llvm-svn: 300240
We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
llvm-svn: 293359
Summary: With discriminator, LineLocation can uniquely identify a callsite without the need to specifying callee name. Remove Callee function name from the key, and put it in the value (FunctionSamples).
Reviewers: davidxl, dnovillo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17827
llvm-svn: 262634
Summary: Surface counter overflow when merging profile data. Merging still occurs on overflow but counts saturate to the maximum representable value. Overflow is reported to the user.
Reviewers: davidxl, dnovillo, silvas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15547
llvm-svn: 255825
When dumping function samples or writing them out as text format, it
helps if the samples are emitted sorted by source location. The sorting
of the maps is a bit slow, so we only do it on demand.
llvm-svn: 253568
Hongtao Yu