This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
The KCFI sanitizer emits "kcfi" operand bundles to indirect
call instructions, which the LLVM back-end lowers into an
architecture-specific type check with a known machine instruction
sequence. Currently, KCFI operand bundle lowering is supported only
on 64-bit X86 and AArch64 architectures.
As a lightweight forward-edge CFI implementation that doesn't
require LTO is also useful for non-Linux low-level targets on
other machine architectures, add a generic KCFI operand bundle
lowering pass that's only used when back-end lowering support is not
available and allows -fsanitize=kcfi to be enabled in Clang on all
architectures.
This relands commit eb2a57ebc7 with
fixes.
Reviewed By: nickdesaulniers, MaskRay
Differential Revision: https://reviews.llvm.org/D135411
This diff splits out (from LLVMCore) IR printing passes into IRPrinter.
This structure is similar to what we already have for IRReader and
enables us to avoid circular dependencies between LLVMCore and Analysis
(this is a preparation for https://reviews.llvm.org/D137768).
The legacy interface is left unchanged, once the legacy pass manager
is removed (in the future) we will be able to clean it up further.
The bazel build configuration has been updated as well.
Test plan:
1/ Tested the following cmake configurations: static/dynamic linking * lld/gold * clang/gcc
2/ bazel build --config=generic_clang @llvm-project//...
Differential revision: https://reviews.llvm.org/D138081
This reverts commit eb2a57ebc7.
llvm/include/llvm/Transforms/Instrumentation/KCFI.h including
llvm/CodeGen is a layering violation. We should use an approach where
Instrumementation/ doesn't need to include CodeGen/.
Sorry for not spotting this in the review.
The KCFI sanitizer emits "kcfi" operand bundles to indirect
call instructions, which the LLVM back-end lowers into an
architecture-specific type check with a known machine instruction
sequence. Currently, KCFI operand bundle lowering is supported only
on 64-bit X86 and AArch64 architectures.
As a lightweight forward-edge CFI implementation that doesn't
require LTO is also useful for non-Linux low-level targets on
other machine architectures, add a generic KCFI operand bundle
lowering pass that's only used when back-end lowering support is not
available and allows -fsanitize=kcfi to be enabled in Clang on all
architectures.
Reviewed By: nickdesaulniers, MaskRay
Differential Revision: https://reviews.llvm.org/D135411
The Assignment Tracking debug-info feature is outlined in this RFC:
https://discourse.llvm.org/t/
rfc-assignment-tracking-a-better-way-of-specifying-variable-locations-in-ir
Add trackAssignments which adds assignment tracking metadata to a function for
a specified set of variables. The intended callers are the inliner and the
front end - those calls will be added in separate patches.
I've added a pass called declare-to-assign (AssignmentTrackingPass) that
converts dbg.declare intrinsics to dbg.assigns using trackAssignments so that
the function can be easily tested (see
llvm/test/DebugInfo/Generic/track-assignments.ll). The pass could also be used
by front ends to easily test out enabling assignment tracking.
Reviewed By: jmorse
Differential Revision: https://reviews.llvm.org/D132225
Add a check (can be disabled via a flag) that the pipeline we generate is actually parsable.
Can be disabled because we don't expect to handle every pass in -print-pipeline-passes.
Fixes#58280.
Reviewed By: ChuanqiXu
Differential Revision: https://reviews.llvm.org/D135703
NewPM -filter-passes (D86360) uses ClassName instead of pass-name as used in
`-passes`, `-print-after`, etc. D87216 has added a mechanism to map
ClassName to pass-name. Adopt it for -filter-passes.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D133263
Introduces the SanitizerBinaryMetadata instrumentation pass which uses
the new MD_pcsections metadata kinds to instrument certain types of
instructions and functions required for breakpoint-based sanitizers.
The first intended user of the binary metadata emitted will be a variant
of GWP-TSan [1]. GWP-TSan will require information about atomic
accesses; to unambiguously determine if an access is atomic or not, we
also require "covered" information which code has been compiled with
SanitizerBinaryMetadata instrumentation enabled.
[1] https://llvm.org/devmtg/2020-09/slides/Morehouse-GWP-Tsan.pdf
Reviewed By: dvyukov
Differential Revision: https://reviews.llvm.org/D130887
With profile data, non-trivial LoopUnswitch will only apply on non-cold loops, as unswitching cold loops may not gain much benefit but significantly increase the code size.
Reviewed By: aeubanks, asbirlea
Differential Revision: https://reviews.llvm.org/D129599
This patch is the first of the two-patch series (D130188, D130179) that
resolve PR56275 (https://github.com/llvm/llvm-project/issues/56275)
which is a missed opportunity, where a perfrectly valid case for loop
interchange failed interchange legality.
If the distance/direction vector produced by dependence analysis (DA) is
negative, it needs to be normalized (reversed). This patch provides helper
functions `isDirectionNegative()` and `normalize()` in DA that does the
normalization, and clients can query DA to do normalization if needed.
A pass option `<normalized-results>` is added to DependenceAnalysisPrinterPass,
and we leverage it to update DA test cases to make sure of test coverage. The
test cases added in `Banerjee.ll` shows that negative vectors are normalized
with `print<da><normalized-results>`.
Reviewed By: bmahjour, Meinersbur, #loopoptwg
Differential Revision: https://reviews.llvm.org/D130188
Symmetric transfer is not a part of C++ standards. So the vendors is not
forced to implement it any way. Given the symmetric transfer nowadays is
an optimization. It makes more sense to enable it only if the
optimization is enabled. It is also helpful for the compilation speed in
O0.
A new hidden option -print-on-crash that prints the IR as it was upon entering
the last pass when there is a crash.
The IR is saved in its print form before each pass is started and a
signal handler is registered. If the compilation crashes, the signal
handler will print the saved IR to dbgs(). This option
can be modified using -print-module-scope to get the IR for the complete
module. Note that this option only works with the new pass manager.
Reviewed By: yrouban
Differential Revision: https://reviews.llvm.org/D86657
The EnableReuseStorageInFrame option is designed for testing only.
But it is better to use *_PASS_WITH_PARAMS macro to keep consistent with
other passes.
For MachO, lower `@llvm.global_dtors` into `@llvm_global_ctors` with
`__cxa_atexit` calls to avoid emitting the deprecated `__mod_term_func`.
Reuse the existing `WebAssemblyLowerGlobalDtors.cpp` to accomplish this.
Enable fallback to the old behavior via Clang driver flag
(`-fregister-global-dtors-with-atexit`) or llc / code generation flag
(`-lower-global-dtors-via-cxa-atexit`). This escape hatch will be
removed in the future.
Differential Revision: https://reviews.llvm.org/D121736
This adds a new option to control AllowSpeculation added in D119965 when
using `-passes=...`.
This allows reproducing #54023 using opt.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D121944
For MachO, lower `@llvm.global_dtors` into `@llvm_global_ctors` with
`__cxa_atexit` calls to avoid emitting the deprecated `__mod_term_func`.
Reuse the existing `WebAssemblyLowerGlobalDtors.cpp` to accomplish this.
Enable fallback to the old behavior via Clang driver flag
(`-fregister-global-dtors-with-atexit`) or llc / code generation flag
(`-lower-global-dtors-via-cxa-atexit`). This escape hatch will be
removed in the future.
Differential Revision: https://reviews.llvm.org/D121736
For MachO, lower `@llvm.global_dtors` into `@llvm_global_ctors` with
`__cxa_atexit` calls to avoid emitting the deprecated `__mod_term_func`.
Reuse the existing `WebAssemblyLowerGlobalDtors.cpp` to accomplish this.
Enable fallback to the old behavior via Clang driver flag
(`-fregister-global-dtors-with-atexit`) or llc / code generation flag
(`-lower-global-dtors-via-cxa-atexit`). This escape hatch will be
removed in the future.
Differential Revision: https://reviews.llvm.org/D121327
This patch adds PrettyStackEntries before running passes. The entries
include the pass name and the IR unit the pass runs on.
The information is used the print additional information when a pass
crashes, including the name and a reference to the IR unit on which it
crashed. This is similar to the behavior of the legacy pass manager.
The improved stack trace now includes:
Stack dump:
0. Program arguments: bin/opt -loop-vectorize -force-vector-width=4 crash.ll
1. Running pass 'ModuleToFunctionPassAdaptor' on module 'crash.ll'
2. Running pass 'LoopVectorizePass' on function '@a'
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D120993
Adding -debugify and -check-debugify in the PassRegistry will make
sure the passes are listed properly by -print-pipeline-passes as
well as -print-passes.
It also allows removal of the custom pipeline parsing callback that
has been used in the NewPMDriver.
Differential Revision: https://reviews.llvm.org/D118369
This creates a way to configure MSAN to for eager checks that will be leveraged
by the introduction of a clang flag (-fsanitize-memory-param-retval).
This is redundant with the existing flag: -mllvm -msan-eager-checks.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D116855
This patch adds a couple of NewPM function passes (dot-dom and
dot-dom-only) that dump DomTree into .dot files.
Reviewed-By: aeubanks
Differential Revision: https://reviews.llvm.org/D116629
Reverts 02940d6d22. Fixes breakage in the modules build.
LLVM loops cannot represent irreducible structures in the CFG. This
change introduce the concept of cycles as a generalization of loops,
along with a CycleInfo analysis that discovers a nested
hierarchy of such cycles. This is based on Havlak (1997), Nesting of
Reducible and Irreducible Loops.
The cycle analysis is implemented as a generic template and then
instatiated for LLVM IR and Machine IR. The template relies on a new
GenericSSAContext template which must be specialized when used for
each IR.
This review is a restart of an older review request:
https://reviews.llvm.org/D83094
Original implementation by Nicolai Hähnle <nicolai.haehnle@amd.com>,
with recent refactoring by Sameer Sahasrabuddhe <sameer.sahasrabuddhe@amd.com>
Differential Revision: https://reviews.llvm.org/D112696
LLVM loops cannot represent irreducible structures in the CFG. This
change introduce the concept of cycles as a generalization of loops,
along with a CycleInfo analysis that discovers a nested
hierarchy of such cycles. This is based on Havlak (1997), Nesting of
Reducible and Irreducible Loops.
The cycle analysis is implemented as a generic template and then
instatiated for LLVM IR and Machine IR. The template relies on a new
GenericSSAContext template which must be specialized when used for
each IR.
This review is a restart of an older review request:
https://reviews.llvm.org/D83094
Original implementation by Nicolai Hähnle <nicolai.haehnle@amd.com>,
with recent refactoring by Sameer Sahasrabuddhe <sameer.sahasrabuddhe@amd.com>
Differential Revision: https://reviews.llvm.org/D112696
Having a NoOpLoopNestPass can ensure that only outermost loop is invoked
for a LoopNestPass with a lit test.
There are some existing passes that are implemented as LoopNestPass, but
they are still using LOOP_PASS macro.
It would be easier to identify LoopNestPasses with a LOOPNEST_PASS
macro.
Differential Revision: https://reviews.llvm.org/D113185
We almost always want to use the default AA pipeline. It's very easy for
users of PassBuilder to forget to customize the AAManager to use the
default AA pipeline (for example, the NewPM C API forgets to do this).
If somebody wants a custom AA pipeline, similar to what is being done
now with the default AA pipeline registration, they can
FAM.registerPass([&] { return std::move(MyAA); });
before calling
PB.registerFunctionAnalyses(FAM);
For example, LTOBackend.cpp and NewPMDriver.cpp do this.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D113210
Summary:
The IR is saved in its print form before each pass is started and a
signal handler is registered. If the compilation crashes, the signal
handler will print the saved IR to dbgs(). This option
can be modified using -print-module-scope to get the IR for the complete
module. Filtering options can be used to improve performance by limiting
which passes (or functions) save the IR. Note that this option only works
with the new pass manager.
Author: Jamie Schmeiser <schmeise@ca.ibm.com>
Reviewed By: aeubanks (Arthur Eubanks) yrouban (Yevgeny Rouban)
Differential Revision: https://reviews.llvm.org/D86657
Fangrui Song