This wraps up from D119053. The 2 headers are moved as described,
fixed file headers and include guards, updated all files where the old
paths were detected (simple grep through the repo), and `clang-format`-ed it all.
Differential Revision: https://reviews.llvm.org/D119876
This reverts commit fd4808887e.
This patch causes gcc to issue a lot of warnings like:
warning: base class ‘class llvm::MCParsedAsmOperand’ should be
explicitly initialized in the copy constructor [-Wextra]
Expanding on D109750.
Since `DBG_VALUE` instructions have final register validity determined in
`LDVImpl::handleDebugValue`, there is no apparent reason to immediately prune
unused register operands as their defs are erased. Consequently, this renders
`MachineInstr::eraseFromParentAndMarkDBGValuesForRemoval` moot; gaining a
substantial performance improvement.
The only necessary changes involve making relevant passes consider invalid
DBG_VALUE vregs uses as valid.
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D112852
TargetPassConfig::addPass takes a "bool verifyAfter" argument which lets
you skip machine verification after a particular pass. Unfortunately
this is used in generic code in TargetPassConfig itself to skip
verification after a generic pass, only because some previous target-
specific pass damaged the MIR on that specific target. This is bad
because problems in one target cause lack of verification for all
targets.
This patch replaces that mechanism with a new MachineFunction property
called "FailsVerification" which can be set by (usually target-specific)
passes that are known to introduce problems. Later passes can reset it
again if they are known to clean up the previous problems.
Differential Revision: https://reviews.llvm.org/D111397
Very late in compilation, backends like X86 will perform optimisations like
this:
$cx = MOV16rm $rax, ...
->
$rcx = MOV64rm $rax, ...
Widening the load from 16 bits to 64 bits. SEeing how the lower 16 bits
remain the same, this doesn't affect execution. However, any debug
instruction reference to the defined operand now refers to a 64 bit value,
nto a 16 bit one, which might be unexpected. Elsewhere in codegen, there's
often this pattern:
CALL64pcrel32 @foo, implicit-def $rax
%0:gr64 = COPY $rax
%1:gr32 = COPY %0.sub_32bit
Where we want to refer to the definition of $eax by the call, but don't
want to refer the copies (they don't define values in the way
LiveDebugValues sees it). To solve this, add a subregister field to the
existing "substitutions" facility, so that we can describe a field within
a larger value definition. I would imagine that this would be used most
often when a value is widened, and we need to refer to the original,
narrower definition.
Differential Revision: https://reviews.llvm.org/D88891
- Add standalone metadata parsing support so that machine metadata nodes
could be populated before and accessed during MIR is parsed.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D103282
Add the `IsText` argument to `GetFile` and `GetFileOrSTDIN` which will help z/OS distinguish between text and binary correctly. This is an extension to [this patch](https://reviews.llvm.org/D97785)
Reviewed By: abhina.sreeskantharajan, amccarth
Differential Revision: https://reviews.llvm.org/D100488
Add a table recording "substitutions" between pairs of <instruction,
operand> numbers, from old pairs to new pairs. Post-isel optimizations are
able to record the outcome of an optimization in this way. For example, if
there were a divide instruction that generated the quotient and remainder,
and it were replaced by one that only generated the quotient:
$rax, $rcx = DIV-AND-REMAINDER $rdx, $rsi, debug-instr-num 1
DBG_INSTR_REF 1, 0
DBG_INSTR_REF 1, 1
Became:
$rax = DIV $rdx, $rsi, debug-instr-num 2
DBG_INSTR_REF 1, 0
DBG_INSTR_REF 1, 1
We could enter a substitution from <1, 0> to <2, 0>, and no substitution
for <1, 1> as it's no longer generated.
This approach means that if an instruction or value is deleted once we've
left SSA form, all variables that used the value implicitly become
"optimized out", something that isn't true of the current DBG_VALUE
approach.
Differential Revision: https://reviews.llvm.org/D85749
This patch defines the MIR format for debug instruction references: it's an
integer trailing an instruction, marked out by "debug-instr-number", much
like how "debug-location" identifies the DebugLoc metadata of an
instruction. The instruction number is stored directly in a MachineInstr.
Actually referring to an instruction comes in a later patch, but is done
using one of these instruction numbers.
I've added a round-trip test and two verifier checks: that we don't label
meta-instructions as generating values, and that there are no duplicates.
Differential Revision: https://reviews.llvm.org/D85746
This patch introduces the new .bb_addr_map section feature which allows us to emit the bits needed for mapping binary profiles to basic blocks into a separate section.
The format of the emitted data is represented as follows. It includes a header for every function:
| Address of the function | -> 8 bytes (pointer size)
| Number of basic blocks in this function (>0) | -> ULEB128
The header is followed by a BB record for every basic block. These records are ordered in the same order as MachineBasicBlocks are placed in the function. Each BB Info is structured as follows:
| Offset of the basic block relative to function begin | -> ULEB128
| Binary size of the basic block | -> ULEB128
| BB metadata | -> ULEB128 [ MBB.isReturn() OR MBB.hasTailCall() << 1 OR MBB.isEHPad() << 2 ]
The new feature will replace the existing "BB labels" functionality with -basic-block-sections=labels.
The .bb_addr_map section scrubs the specially-encoded BB symbols from the binary and makes it friendly to profilers and debuggers.
Furthermore, the new feature reduces the binary size overhead from 70% bloat to only 12%.
For more information and results please refer to the RFC: https://lists.llvm.org/pipermail/llvm-dev/2020-July/143512.html
Reviewed By: MaskRay, snehasish
Differential Revision: https://reviews.llvm.org/D85408
Unwinders may only preserve the lower 64bits of Neon and SVE registers,
as only the registers in the base ABI are guaranteed to be preserved
over the exception edge. The caller will need to preserve additional
registers for when the call throws an exception and the unwinder has
tried to recover state.
For e.g.
svint32_t bar(svint32_t);
svint32_t foo(svint32_t x, bool *err) {
try { bar(x); } catch (...) { *err = true; }
return x;
}
`z0` needs to be spilled before the call to `bar(x)` and reloaded before
returning from foo, as the exception handler may have clobbered z0.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D84737
It's possible to have a single virtual register def with a subreg
index that would pass the previous check, but it's not possible to
have a subregister def in SSA.
This is in preparation for adding stricter checks for SSA MIR.
For IR generated by a compiler, this is really simple: you just take the
datalayout from the beginning of the file, and apply it to all the IR
later in the file. For optimization testcases that don't care about the
datalayout, this is also really simple: we just use the default
datalayout.
The complexity here comes from the fact that some LLVM tools allow
overriding the datalayout: some tools have an explicit flag for this,
some tools will infer a datalayout based on the code generation target.
Supporting this properly required plumbing through a bunch of new
machinery: we want to allow overriding the datalayout after the
datalayout is parsed from the file, but before we use any information
from it. Therefore, IR/bitcode parsing now has a callback to allow tools
to compute the datalayout at the appropriate time.
Not sure if I covered all the LLVM tools that want to use the callback.
(clang? lli? Misc IR manipulation tools like llvm-link?). But this is at
least enough for all the LLVM regression tests, and IR without a
datalayout is not something frontends should generate.
This change had some sort of weird effects for certain CodeGen
regression tests: if the datalayout is overridden with a datalayout with
a different program or stack address space, we now parse IR based on the
overridden datalayout, instead of the one written in the file (or the
default one, if none is specified). This broke a few AVR tests, and one
AMDGPU test.
Outside the CodeGen tests I mentioned, the test changes are all just
fixing CHECK lines and moving around datalayout lines in weird places.
Differential Revision: https://reviews.llvm.org/D78403
in the same section.
This allows specifying BasicBlock clusters like the following example:
!foo
!!0 1 2
!!4
This places basic blocks 0, 1, and 2 in one section in this order, and
places basic block #4 in a single section of its own.
This is the second patch in a series of patches to enable basic block
sections support.
This patch adds support for:
* Creating direct jumps at the end of basic blocks that have fall
through instructions.
* New pass, bbsections-prepare, that analyzes placement of basic blocks
in sections.
* Actual placing of a basic block in a unique section with special
handling of exception handling blocks.
* Supports placing a subset of basic blocks in a unique section.
* Support for MIR serialization and deserialization with basic block
sections.
Parent patch : D68063
Differential Revision: https://reviews.llvm.org/D73674
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
A random set of attributes are implemented by llc/opt forcing the
string attributes on the IR functions before processing anything. This
would not happen for MIR functions, which have not yet been created at
this point.
Use a callback in the MIR parser, purely to avoid dealing with the
ugliness that the command line flags are in a .inc file, and would
require allowing access to these flags from multiple places (either
from the MIR parser directly, or a new utility pass to implement these
flags). It would probably be better to cleanup the flag handling into
a separate library.
This is in preparation for treating more command line flags with a
corresponding function attribute in a more uniform way. The fast math
flags in particular have a messy system where the command line flag
sets the behavior from a function attribute if present, and otherwise
the command line flag. This means if any other pass tries to inspect
the function attributes directly, it will be inconsistent with the
intended behavior. This is also inconsistent with the current behavior
of -mcpu and -mattr, which overwrites any pre-existing function
attributes. I would like to move this to consistenly have the command
line flags not overwrite any pre-existing attributes, and to always
ensure the command line flags are consistent with the function
attributes.
Summary:
This catches malformed mir files which specify alignment as log2 instead of pow2.
See https://reviews.llvm.org/D65945 for reference,
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: MatzeB, qcolombet, dschuff, arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Petar.Avramovic, asbirlea, s.egerton, pzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67433
llvm-svn: 371608
Summary:
This patch renames functions that takes or returns alignment as log2, this patch will help with the transition to llvm::Align.
The renaming makes it explicit that we deal with log(alignment) instead of a power of two alignment.
A few renames uncovered dubious assignments:
- `MirParser`/`MirPrinter` was expecting powers of two but `MachineFunction` and `MachineBasicBlock` were using deal with log2(align). This patch fixes it and updates the documentation.
- `MachineBlockPlacement` exposes two flags (`align-all-blocks` and `align-all-nofallthru-blocks`) supposedly interpreted as power of two alignments, internally these values are interpreted as log2(align). This patch updates the documentation,
- `MachineFunctionexposes` exposes `align-all-functions` also interpreted as power of two alignment, internally this value is interpreted as log2(align). This patch updates the documentation,
Reviewers: lattner, thegameg, courbet
Subscribers: dschuff, arsenm, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, hiraditya, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, Jim, s.egerton, llvm-commits, courbet
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65945
llvm-svn: 371045
Summary:
Extend the MIR parser and writer so that the call site information can
refer to calls that are bundled.
Reviewers: aprantl, asowda, NikolaPrica, djtodoro, ivanbaev, vsk
Reviewed By: aprantl
Subscribers: arsenm, hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D66145
llvm-svn: 369256
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
Add an attribute into the MachineFunction that tracks call site info.
([8/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D61061
llvm-svn: 364506
Kazu Hirata