This cleans up all LoadInst creation in LLVM to explicitly pass the
value type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57172
llvm-svn: 352911
This cleans up all InvokeInst creation in LLVM to explicitly pass a
function type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57171
llvm-svn: 352910
This cleans up all CallInst creation in LLVM to explicitly pass a
function type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57170
llvm-svn: 352909
An unused variable problem was introduced with rL352870
and stubbed out with rL352871, but we can make a better
fix by actually using the local variable in code rather
than just the assert.
llvm-svn: 352873
If we can reduce the x86-specific intrinsic to the generic op, it allows existing
simplifications and value tracking folds. AFAICT, this always results in identical
x86 codegen in the non-reduced case...which should be true because we semi-generically
(too aggressively IMO) convert to llvm.uadd.with.overflow in CGP, so the DAG/isel must
already combine/lower this intrinsic as expected.
This isn't quite what was requested in:
https://bugs.llvm.org/show_bug.cgi?id=40486
...but we want to have these kinds of folds early for efficiency and to enable greater
simplifications. For the case in the bug report where we have:
_addcarry_u64(0, ahi, 0, &ahi)
...this gets completely simplified away in IR.
Differential Revision: https://reviews.llvm.org/D57453
llvm-svn: 352870
InlineCost's isInlineViable() is changed to return InlineResult
instead of bool. This provides messages for failure reasons and
allows to get more specific messages for cases where callsites
are not viable for inlining.
Reviewed By: xbolva00, anemet
Differential Revision: https://reviews.llvm.org/D57089
llvm-svn: 352849
Indices are checked as they are generated. No need to fill the whole array of indices.
Differential Revision: https://reviews.llvm.org/D57144
llvm-svn: 352839
Recommit r352791 after tweaking DerivedTypes.h slightly, so that gcc
doesn't choke on it, hopefully.
Original Message:
The FunctionCallee type is effectively a {FunctionType*,Value*} pair,
and is a useful convenience to enable code to continue passing the
result of getOrInsertFunction() through to EmitCall, even once pointer
types lose their pointee-type.
Then:
- update the CallInst/InvokeInst instruction creation functions to
take a Callee,
- modify getOrInsertFunction to return FunctionCallee, and
- update all callers appropriately.
One area of particular note is the change to the sanitizer
code. Previously, they had been casting the result of
`getOrInsertFunction` to a `Function*` via
`checkSanitizerInterfaceFunction`, and storing that. That would report
an error if someone had already inserted a function declaraction with
a mismatching signature.
However, in general, LLVM allows for such mismatches, as
`getOrInsertFunction` will automatically insert a bitcast if
needed. As part of this cleanup, cause the sanitizer code to do the
same. (It will call its functions using the expected signature,
however they may have been declared.)
Finally, in a small number of locations, callers of
`getOrInsertFunction` actually were expecting/requiring that a brand
new function was being created. In such cases, I've switched them to
Function::Create instead.
Differential Revision: https://reviews.llvm.org/D57315
llvm-svn: 352827
This reverts commit f47d6b38c7 (r352791).
Seems to run into compilation failures with GCC (but not clang, where
I tested it). Reverting while I investigate.
llvm-svn: 352800
The FunctionCallee type is effectively a {FunctionType*,Value*} pair,
and is a useful convenience to enable code to continue passing the
result of getOrInsertFunction() through to EmitCall, even once pointer
types lose their pointee-type.
Then:
- update the CallInst/InvokeInst instruction creation functions to
take a Callee,
- modify getOrInsertFunction to return FunctionCallee, and
- update all callers appropriately.
One area of particular note is the change to the sanitizer
code. Previously, they had been casting the result of
`getOrInsertFunction` to a `Function*` via
`checkSanitizerInterfaceFunction`, and storing that. That would report
an error if someone had already inserted a function declaraction with
a mismatching signature.
However, in general, LLVM allows for such mismatches, as
`getOrInsertFunction` will automatically insert a bitcast if
needed. As part of this cleanup, cause the sanitizer code to do the
same. (It will call its functions using the expected signature,
however they may have been declared.)
Finally, in a small number of locations, callers of
`getOrInsertFunction` actually were expecting/requiring that a brand
new function was being created. In such cases, I've switched them to
Function::Create instead.
Differential Revision: https://reviews.llvm.org/D57315
llvm-svn: 352791
Summary:
COFF requires that COMDAT name match that of the leader. When we promote
and rename an internal leader in ThinLTO due to an import, ensure we
subsequently rename the associated COMDAT. Similar to D31963 which did
this during ThinLTO module splitting.
Fixes PR40414.
Reviewers: pcc, inglorion
Subscribers: mehdi_amini, dexonsmith, dmajor, llvm-commits
Differential Revision: https://reviews.llvm.org/D57395
llvm-svn: 352763
Introduces a pass that provides default lowering strategy for the
`experimental.widenable.condition` intrinsic, replacing all its uses with
`i1 true`.
Differential Revision: https://reviews.llvm.org/D56096
Reviewed By: reames
llvm-svn: 352739
This is meant to be used with clang's __builtin_dynamic_object_size.
When 'true' is passed to this parameter, the intrinsic has the
potential to be folded into instructions that will be evaluated
at run time. When 'false', the objectsize intrinsic behaviour is
unchanged.
rdar://32212419
Differential revision: https://reviews.llvm.org/D56761
llvm-svn: 352664
The point is that this simplifies integration of new intrinsics into SimplifiedDemandedVectorElts, and ensures we don't miss any existing ones.
This is intended to be NFC-ish, but as seen from the diffs, can produce slightly different output. This is due to order of transforms w/in instcombine resulting in two slightly different fixed points. That's something we should fix, but isn't a problem w/this patch per se.
Differential Revision: https://reviews.llvm.org/D57398
llvm-svn: 352653
Summary:
Check the bool value of the attribute in getOptionalBoolLoopAttribute
not just its existance.
Eliminates the warning noise generated when vectorization is explicitly disabled.
Reviewers: Meinersbur, hfinkel, dmgreen
Subscribers: jlebar, sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D57260
llvm-svn: 352555
I'm circling back around to a loose end from D51929.
The backend (either CGP or DAG) doesn't recognize this pattern, so we end up with different asm for these IR variants.
Regardless of any future changes to canonicalize to saturation/overflow intrinsics, we want to get raw IR variations
into the minimal number of raw IR forms. If/when we can canonicalize to intrinsics, that will make that step easier.
Pre: C2 == ~C1
%a = add i32 %x, C1
%c = icmp ugt i32 %x, C2
%r = select i1 %c, i32 -1, i32 %a
=>
%a = add i32 %x, C1
%c2 = icmp ult i32 %x, C2
%r = select i1 %c2, i32 %a, i32 -1
https://rise4fun.com/Alive/pkH
Differential Revision: https://reviews.llvm.org/D57352
llvm-svn: 352536
Summary:
This patch avoids an assert in IPConstantPropagation when
there is a argument count/type mismatch between the caller and
the callee.
While this is actually UB on C-level (clang emits a warning),
the IR verifier seems to accept it. I'm not sure what other
frontends/languages might think about this, so simply bailing out
to avoid hitting an assert (in CallSiteBase<>::getArgOperand or
Value::doRAUW) seems like a simple solution.
The problem is exposed by the fact that AbstractCallSites will look
through a bitcast at the callee position of a call/invoke.
Reviewers: jdoerfert, reames, efriedma
Reviewed By: jdoerfert, efriedma
Subscribers: eli.friedman, efriedma, llvm-commits
Differential Revision: https://reviews.llvm.org/D57052
llvm-svn: 352469
GEPs can produce either scalar or vector results. If we're extracting only a subset of the vector lanes, simplifying the operands is helpful in eliminating redundant computation, and (eventually) allowing further optimizations
Differential Revision: https://reviews.llvm.org/D57177
llvm-svn: 352440
Summary:
A recent fix to the ThinLTO whole program dead code elimination (D56117)
increased the thin link time on a large MSAN'ed binary by 2x.
It's likely that the time increased elsewhere, but was more noticeable
here since it was already large and ended up timing out.
That change made it so we would repeatedly scan all copies of linkonce
symbols for liveness every time they were encountered during the graph
traversal. This was needed since we only mark one copy of an aliasee as
live when we encounter a live alias. This patch fixes the issue in a
more efficient manner by simply proactively visiting the aliasee (thus
marking all copies live) when we encounter a live alias.
Two notes: One, this requires a hash table lookup (finding the aliasee
summary in the index based on aliasee GUID). However, the impact of this
seems to be small compared to the original pre-D56117 thin link time. It
could be addressed if we keep the aliasee ValueInfo in the alias summary
instead of the aliasee GUID, which I am exploring in a separate patch.
Second, we only populate the aliasee GUID field when reading summaries
from bitcode (whether we are reading individual summaries and merging on
the fly to form the compiled index, or reading in a serialized combined
index). Thankfully, that's currently the only way we can get to this
code as we don't yet support reading summaries from LLVM assembly
directly into a tool that performs the thin link (they must be converted
to bitcode first). I added a FIXME, however I have the fix under test
already. The easiest fix is to simply populate this field always, which
isn't hard, but more likely the change I am exploring to store the
ValueInfo instead as described above will subsume this. I don't want to
hold up the regression fix for this though.
Reviewers: trentxintong
Subscribers: mehdi_amini, inglorion, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D57203
llvm-svn: 352438
Summary:
If MemorySSA is avaiable, we can skip checking all instructions if block has any Defs.
(volatile loads are also Defs).
We still need to check all instructions for "canThrow", even if no Defs are found.
Reviewers: chandlerc
Subscribers: sanjoy, jlebar, Prazek, george.burgess.iv, llvm-commits
Differential Revision: https://reviews.llvm.org/D57129
llvm-svn: 352393
Summary:
Set default value for retrieved attributes to 1, since the check is against 1.
Eliminates the warning noise generated when the attributes are not present.
Reviewers: sanjoy
Subscribers: jlebar, llvm-commits
Differential Revision: https://reviews.llvm.org/D57253
llvm-svn: 352238
The main goal of the model is to avoid *increasing* function size, as
that would eradicate any memory locality benefits from splitting. This
happens when:
- There are too many inputs or outputs to the cold region. Argument
materialization and reloads of outputs have a cost.
- The cold region has too many distinct exit blocks, causing a large
switch to be formed in the caller.
- The code size cost of the split code is less than the cost of a
set-up call.
A secondary goal is to prevent excessive overall binary size growth.
With the cost model in place, I experimented to find a splitting
threshold that works well in practice. To make warm & cold code easily
separable for analysis purposes, I moved split functions to a "cold"
section. I experimented with thresholds between [0, 4] and set the
default to the threshold which minimized geomean __text size.
Experiment data from building LNT+externals for X86 (N = 639 programs,
all sizes in bytes):
| Configuration | __text geom size | __cold geom size | TEXT geom size |
| **-Os** | 1736.3 | 0, n=0 | 10961.6 |
| -Os, thresh=0 | 1740.53 | 124.482, n=134 | 11014 |
| -Os, thresh=1 | 1734.79 | 57.8781, n=90 | 10978.6 |
| -Os, thresh=2 | ** 1733.85 ** | 65.6604, n=61 | 10977.6 |
| -Os, thresh=3 | 1733.85 | 65.3071, n=61 | 10977.6 |
| -Os, thresh=4 | 1735.08 | 67.5156, n=54 | 10965.7 |
| **-Oz** | 1554.4 | 0, n=0 | 10153 |
| -Oz, thresh=2 | ** 1552.2 ** | 65.633, n=61 | 10176 |
| **-O3** | 2563.37 | 0, n=0 | 13105.4 |
| -O3, thresh=2 | ** 2559.49 ** | 71.1072, n=61 | 13162.4 |
Picking thresh=2 reduces the geomean __text section size by 0.14% at
-Os, -Oz, and -O3 and causes ~0.2% growth in the TEXT segment. Note that
TEXT size is page-aligned, whereas section sizes are byte-aligned.
Experiment data from building LNT+externals for ARM64 (N = 558 programs,
all sizes in bytes):
| Configuration | __text geom size | __cold geom size | TEXT geom size |
| **-Os** | 1763.96 | 0, n=0 | 42934.9 |
| -Os, thresh=2 | ** 1760.9 ** | 76.6755, n=61 | 42934.9 |
Picking thresh=2 reduces the geomean __text section size by 0.17% at
-Os and causes no growth in the TEXT segment.
Measurements were done with D57082 (r352080) applied.
Differential Revision: https://reviews.llvm.org/D57125
llvm-svn: 352228
2nd part of D57095 with the same reason, just in another place. We never
fold branches that are not immediately in the current loop, but this check
is missing in `IsEdgeLive` As result, it may think that the edge in subloop is
dead while it's live. It's a pessimization in the current stance.
Differential Revision: https://reviews.llvm.org/D57147
Reviewed By: rupprecht
llvm-svn: 352170
While a cold invoke itself and its unwind destination can't be
extracted, code which unconditionally executes before/after the invoke
may still be profitable to extract.
With cost model changes from D57125 applied, this gives a 3.5% increase
in split text across LNT+externals on arm64 at -Os.
llvm-svn: 352160
Otherwise they are treated as dynamic allocas, which ends up increasing
code size significantly. This reduces size of Chromium base_unittests
by 2MB (6.7%).
Differential Revision: https://reviews.llvm.org/D57205
llvm-svn: 352152
Summary:
MemorySSA needs updating each time an instruction is moved.
LICM and control flow hoisting re-hoists instructions, thus needing another update when re-moving those instructions.
Pending cleanup: the MSSA update is duplicated, should be moved inside moveInstructionBefore.
Reviewers: jnspaulsson
Subscribers: sanjoy, jlebar, Prazek, george.burgess.iv, llvm-commits
Differential Revision: https://reviews.llvm.org/D57176
llvm-svn: 352092
Performing splitting early has several advantages:
- Inhibiting inlining of cold code early improves code size. Compared
to scheduling splitting at the end of the pipeline, this cuts code
size growth in half within the iOS shared cache (0.69% to 0.34%).
- Inhibiting inlining of cold code improves compile time. There's no
need to inline split cold functions, or to inline as much *within*
those split functions as they are marked `minsize`.
- During LTO, extra work is only done in the pre-link step. Less code
must be inlined during cross-module inlining.
An additional motivation here is that the most common cold regions
identified by the static/conservative splitting heuristic can (a) be
found before inlining and (b) do not grow after inlining. E.g.
__assert_fail, os_log_error.
The disadvantages are:
- Some opportunities for splitting out cold code may be missed. This
gap can potentially be narrowed by adding a worklist algorithm to the
splitting pass.
- Some opportunities to reduce code size may be lost (e.g. store
sinking, when one side of the CFG diamond is split). This does not
outweigh the code size benefits of splitting earlier.
On net, splitting early in the pipeline has substantial code size
benefits, and no major effects on memory locality or performance. We
measured memory locality using ktrace data, and consistently found that
10% fewer pages were needed to capture 95% of text page faults in key
iOS benchmarks. We measured performance on frequency-stabilized iOS
devices using LNT+externals.
This reverses course on the decision made to schedule splitting late in
r344869 (D53437).
Differential Revision: https://reviews.llvm.org/D57082
llvm-svn: 352080
After submitting https://reviews.llvm.org/D57138, I realized it was slightly more conservative than needed. The scalar indices don't appear to be a problem on a vector gep, we even had a test for that.
Differential Revision: https://reviews.llvm.org/D57161
llvm-svn: 352061
This is an alternative to https://reviews.llvm.org/D57103. After discussion, we dedicided to check this in as a temporary workaround, and pursue a true fix under the original thread.
The issue at hand is that the base rewriting algorithm doesn't consider the fact that GEPs can turn a scalar input into a vector of outputs. We had handling for scalar GEPs and fully vector GEPs (i.e. all vector operands), but not the scalar-base + vector-index forms. A true fix here requires treating GEP analogously to extractelement or shufflevector.
This patch is merely a workaround. It simply hides the crash at the cost of some ugly code gen for this presumable very rare pattern.
Differential Revision: https://reviews.llvm.org/D57138
llvm-svn: 352059
Instead of manually computing DT and PDT, we can get the from the pass
manager, which ideally has them already cached. With the new pass
manager, we could even preserve DT/PDT on a per function basis in a
module pass.
I think this also addresses the TODO about re-using the computed DTs for
BFI. IIUC, GetBFI will fetch the DT from the pass manager and when we
will fetch the cached version later.
Reviewers: vsk, hiraditya, tejohnson, thegameg, sebpop
Reviewed By: vsk
Differential Revision: https://reviews.llvm.org/D57092
llvm-svn: 352036
When we choose whether or not we should mark block as dead, we have an
inconsistent logic in markup of live blocks.
- We take candidate IF its terminator branches on constant AND it is immediately
in current loop;
- We mark successor live IF its terminator doesn't branch by constant OR it branches
by constant and the successor is its always taken block.
What we are missing here is that when the terminator branches on a constant but is
not taken as a candidate because is it not immediately in the current loop, we will
mark only one (always taken) successor as live. Therefore, we do NOT do the actual
folding but may NOT mark one of the successors as live. So the result of markup is
wrong in this case, and we may then hit various asserts.
Thanks Jordan Rupprech for reporting this!
Differential Revision: https://reviews.llvm.org/D57095
Reviewed By: rupprecht
llvm-svn: 352024
Summary:
UBSan wants to detect when unreachable code is actually reached, so it
adds instrumentation before every `unreachable` instruction. However,
the optimizer will remove code after calls to functions marked with
`noreturn`. To avoid this UBSan removes `noreturn` from both the call
instruction as well as from the function itself. Unfortunately, ASan
relies on this annotation to unpoison the stack by inserting calls to
`_asan_handle_no_return` before `noreturn` functions. This is important
for functions that do not return but access the the stack memory, e.g.,
unwinder functions *like* `longjmp` (`longjmp` itself is actually
"double-proofed" via its interceptor). The result is that when ASan and
UBSan are combined, the `noreturn` attributes are missing and ASan
cannot unpoison the stack, so it has false positives when stack
unwinding is used.
Changes:
# UBSan now adds the `expect_noreturn` attribute whenever it removes
the `noreturn` attribute from a function
# ASan additionally checks for the presence of this attribute
Generated code:
```
call void @__asan_handle_no_return // Additionally inserted to avoid false positives
call void @longjmp
call void @__asan_handle_no_return
call void @__ubsan_handle_builtin_unreachable
unreachable
```
The second call to `__asan_handle_no_return` is redundant. This will be
cleaned up in a follow-up patch.
rdar://problem/40723397
Reviewers: delcypher, eugenis
Tags: #sanitizers
Differential Revision: https://reviews.llvm.org/D56624
llvm-svn: 352003
Summary:
Profile sample files include the number of times each entry or inlined
call site is sampled. This is translated into the entry count metadta
on functions.
When sample data is being read, if a call site that was inlined
in the sample program is considered cold and not inlined, then
the entry count of the out-of-line functions does not reflect
the current compilation.
In this patch, we note call sites where the function was not inlined
and as a last action of the sample profile loading, we update the
called function's entry count to reflect the calls from these
call sites which are not included in the profile file.
Reviewers: danielcdh, wmi, Kader, modocache
Reviewed By: wmi
Subscribers: davidxl, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D52845
llvm-svn: 352001
James Y Knight