When zlib is disabled at build time, the diagnostic `LLVM was not compiled with
LLVM_ENABLE_ZLIB: cannot decompress` for --decompress-debug-sections may be
inaccurate: if zstd is enabled, we should still support zstd decompression.
It's not useful to test zlib and zstd. Just remove the diagnostic and add a new
one before `compression::decompress`.
This fixes compress-debug-sections-zstd.test
Reviewed By: mariusz-sikora-at-amd, jhenderson, phosek
Differential Revision: https://reviews.llvm.org/D135744
"Z" was so named when we had both gABI ELFCOMPRESS_ZLIB and the legacy .zdebug support.
Now we have just one zlib format, we should use the more descriptive name.
This adds the other potential bitcode sections that can exist and should
be stripped with `-r` from `llvm-bitcode-strip`.
Differential Revision: https://reviews.llvm.org/D132267
The request is mentioned on D129053. I feel that having this functionality is
mildly useful (not strong).
* Rename .ctors to .init_array and change sh_type to SHT_INIT_ARRAY (GNU objcopy
detects the special name but we don't).
* Craft tests for a new SHT_LLVM_* extension
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D129337
* GNU objcopy supports --set-section-flags src=... --rename-section src=tst and --set-section-flags runs first.
* GNU objcopy processes --update-section before --rename-section.
To match the two behaviors, postpone --rename-section and allow its use together
with --set-section-flags.
As a side effect, --rename-section=.foo1=.foo2 --add-section=.foo1=/dev/null
leads to .foo2 while GNU objcopy surprisingly produces .foo1 (so
--set-section-flags --add-section --rename-section do not form a total order).
I think the deviation is fine as a total order makes more sense.
Rename set-section-flags-and-rename.test to
set-section-attr-and-rename.test and additionally test --set-section-alignment
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D129336
* Refactor compression namespaces across the project, making way for a possible
introduction of alternatives to zlib compression.
Changes are as follows:
* Relocate the `llvm::zlib` namespace to `llvm::compression::zlib`.
Reviewed By: MaskRay, leonardchan, phosek
Differential Revision: https://reviews.llvm.org/D128953
clang 14 removed -gz=zlib-gnu support and ld.lld removed linker input support
for zlib-gnu in D126793. Now let's remove zlib-gnu from llvm-objcopy.
* .zdebug* sections are no longer recognized as debug sections. --strip* don't remove them.
They are copied like other opaque sections
* --decompress-debug-sections does not uncompress .zdebug* sections
* --compress-debug-sections=zlib-gnu is not supported
It is very rare but in case a user has object files using .zdebug . They can use
llvm-objcopy<15 or GNU objcopy for uncompression.
--compress-debug-sections=zlib-gnu is unlikely ever used by anyone, so I do not
add a custom diagnostic.
Differential Revision: https://reviews.llvm.org/D128688
This patch adds an llvm-driver multicall tool that can combine multiple
LLVM-based tools. The build infrastructure is enabled for a tool by
adding the GENERATE_DRIVER option to the add_llvm_executable CMake
call, and changing the tool's main function to a canonicalized
tool_name_main format (i.e. llvm_ar_main, clang_main, etc...).
As currently implemented llvm-driver contains dsymutil, llvm-ar,
llvm-cxxfilt, llvm-objcopy, and clang (if clang is included in the
build).
llvm-driver can be enabled from builds by setting
LLVM_TOOL_LLVM_DRIVER_BUILD=On.
There are several limitations in the current implementation, which can
be addressed in subsequent patches:
(1) the multicall binary cannot currently properly handle
multi-dispatch tools. This means symlinking llvm-ranlib to llvm-driver
will not properly result in llvm-ar's main being called.
(2) the multicall binary cannot be comprised of tools containing
conflicting cl::opt options as the global cl::opt option list cannot
contain duplicates.
These limitations can be addressed in subsequent patches.
Differential revision: https://reviews.llvm.org/D109977
Functionality of restoreStatOnFile may be reused. Move it into
FileUtilities.cpp. Create helper class FilePermissionsApplier
to store and apply permissions.
Differential Revision: https://reviews.llvm.org/D123821
I noticed that when --update-section was added to llvm-objcopy it was
not added to the command guide, see
25bcd94234. This change adds it to the
docs and updates the help text.
Differential Revision: https://reviews.llvm.org/D122907
While moving objcopy into separate library(D88827), NameOrPattern::create()
was mistakenly placed into ObjcopyOptions.cpp. This patch moves
the NameOrPattern::create() into CommonConfig.h. Additionally it adds
test for using NameOrPattern.
Differential Revision: https://reviews.llvm.org/D121005
When running llvm-bitcode-strip we want to remove the __LLVM
segment as well as the __bundle section when there are no other
sections in the segment.
Differential Revision: https://reviews.llvm.org/D120927
This diff adds functionality to the llvm-bitcode-strip tool for
stripping of LLVM bitcode sections.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D120669
Add the -o flag to specify an output path for llvm-bitcode-strip.
This matches the interface to the Xcode bitcode_strip tool.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D120731
Current objcopy implementation has a possibility to add or update sections.
The incoming section is specified as a pair: section name and name of the file
containing section data. The interface does not allow to specify incoming
section as a memory buffer. This patch adds possibility to specify incoming
section as a memory buffer.
Differential Revision: https://reviews.llvm.org/D120486
The section name encoding for `llvm-objcopy` had two main issues, the
first is that the size used for the `snprintf` in the original code is
incorrect because `snprintf` adds a null byte, so this code was only
able to encode offsets of 6 digits - `/`, `\0` and 6 digits of the
offset - rather than the 7 digits it should support.
And the second part is that it didn't support the base64 encoding for
offsets larger than 7 digits.
This issue specifically showed up when using the `clang-offload-bundler`
with a binary containing a lot of symbols/sections, since it uses
`llvm-objcopy` to add the sections containing the offload code.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D118692
Previously you would get this error:
```
error: unsupported load command (cmd=0x2d)
```
If the binary you were redefining the symbols of contained a
LC_LINKER_OPTION load command. This command does not need to be changed
when redefining symbols so we can ignore it like many others.
Differential Revision: https://reviews.llvm.org/D118526
Implements `--update-section` which is currently supported for ELF for Mach-O as well
Reviewed By: alexander-shaposhnikov
Differential Revision: https://reviews.llvm.org/D117281
Mapping symbols are required by ARM/AArch64 ELF ABI. They help to
disassemble files correctly and are also used in linkers. Nonetheless,
for executable files, the symbols can be stripped to better resemble
the behavior of GNU's objcopy.
Differential Revision: https://reviews.llvm.org/D117233
This reverts commit fd4808887e.
This patch causes gcc to issue a lot of warnings like:
warning: base class ‘class llvm::MCParsedAsmOperand’ should be
explicitly initialized in the copy constructor [-Wextra]
MIPS64 little endian target has a "special" encoding of `r_info`
relocation record field. Instead of one 64-bit little endian number, it
is a little endian 32-bit number followed by a 32-bit big endian number.
For correct reading and writing such fields we must provide information
about target machine into the corresponding routine. This patch does
this for the `llvm-objcopy` tool and fix handling of MIPS64 little
endian files.
The bug was reported in the issue #52647.
Differential Revision: https://reviews.llvm.org/D115635
Most of `MemoryBuffer` interfaces expose a `RequiresNullTerminator` parameter that's being used to:
* determine how to open a file (`mmap` vs `open`),
* assert newly initialized buffer indeed has an implicit null terminator.
This patch adds the paramater to the `SmallVectorMemoryBuffer` constructors, meaning:
* null terminator can now be added to `SmallVector`s that didn't have one before,
* `SmallVectors` that had a null terminator before keep it even after the move.
In line with existing code, the new parameter is defaulted to `true`. This patch makes sure all calls to the `SmallVectorMemoryBuffer` constructor set it to `false` to preserve the current semantics.
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D115331
This is another attempt at D59351 which attempted to add --update-section, but
with some heuristics for adjusting segment/section offsets/sizes in the event
the data copied into the section is larger than the original size of the section.
We are opting to not support this case. GNU's objcopy was able to do this because
the linker and objcopy are tightly coupled enough that segment reformatting was
simpler. This is not the case with llvm-objcopy and lld where they like to be separated.
This will attempt to copy data into the section without changing any other
properties of the parent segment (if the section is part of one).
Differential Revision: https://reviews.llvm.org/D112116
It seems that llvm-objcopy stores data temporarily misaligned with the
requirements of the underlaying struct from libBinaryFormat, and UBSan
generates a runtime error.
Instead of trying to reinterpret the memory as the struct itself, simply
access the `char *` pointer that we are interested in, and that do not
have alignment restrictions.
This problem was pointed out in a comment of D111164.
Differential Revision: https://reviews.llvm.org/D112744
**Context:**
This is a second attempt at introducing signature regeneration to llvm-objcopy. In this diff: https://reviews.llvm.org/D109840, a script was introduced to test
the validity of a code signature. In this diff: https://reviews.llvm.org/D109803 (now reverted), an effort was made to extract the signature generation behavior out of LLD into a common location for use in llvm-objcopy. In this diff: https://reviews.llvm.org/D109972 it was decided that there was no appropriate common location and that a small amount of duplication to bring signature generation to llvm-objcopy would be better. This diff introduces this duplication.
**Summary**
Prior to this change, if a LC_CODE_SIGNATURE load command
was included in the binary passed to llvm-objcopy, the command and
associated section were simply copied and included verbatim in the
new binary. If rest of the binary was modified at all, this results
in an invalid Mach-O file. This change regenerates the signature
rather than copying it.
The code_signature_lc.test test was modified to include the yaml
representation of a small signed MachO executable in order to
effectively test the signature generation.
Reviewed By: alexander-shaposhnikov, #lld-macho
Differential Revision: https://reviews.llvm.org/D111164
As for now, llvm-objcopy renames only sections that are specified
explicitly in --rename-section, while GNU objcopy keeps names of
relocation sections in sync with their targets. For example:
> readelf -S test.o
...
[ 1] .foo PROGBITS
[ 2] .rela.foo RELA
> objcopy --rename-section .foo=.bar test.o gnu.o
> readelf -S gnu.o
...
[ 1] .bar PROGBITS
[ 2] .rela.bar RELA
> llvm-objcopy --rename-section .foo=.bar test.o llvm.o
> readelf -S llvm.o
...
[ 1] .bar PROGBITS
[ 2] .rela.foo RELA
This patch makes llvm-objcopy to match the behavior of GNU objcopy better.
Differential Revision: https://reviews.llvm.org/D110352
Fangrui Song