This mimics FileCheck's --check-prefixes option.
The default prefix is "expected". That is, "-verify" is equivalent to
"-verify=expected".
The goal is to permit exercising a single test suite source file with different
compiler options producing different sets of diagnostics. While cpp can be
combined with the existing -verify to accomplish the same goal, source is often
easier to maintain when it's not cluttered with preprocessor directives or
duplicate passages of code. For example, this patch also rewrites some existing
clang tests to demonstrate the benefit of this feature.
Patch by Joel E. Denny, thanks!
Differential Revision: https://reviews.llvm.org/D39694
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@320908 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a new command line option -mprefer-vector-width to specify a preferred vector width for the vectorizers. Valid values are 'none' and unsigned integers. The driver will check that it meets those constraints. Specific supported integers will be managed by the targets in the backend.
Clang will take the value and add it as a new function attribute during CodeGen.
This represents the alternate direction proposed by Sanjay in this RFC: http://lists.llvm.org/pipermail/llvm-dev/2017-November/118734.html
The syntax here matches gcc, though gcc treats it as an x86 specific command line argument. gcc only allows values of 128, 256, and 512. I'm not having clang check any values.
Differential Revision: https://reviews.llvm.org/D40230
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@320419 91177308-0d34-0410-b5e6-96231b3b80d8
As reported in llvm bugzilla 32377.
Here’s a patch to add preinclude of stdc-predef.h.
The gcc documentation says “On GNU/Linux, <stdc-predef.h> is pre-included.” See https://gcc.gnu.org/gcc-4.8/porting_to.html;
The preinclude is inhibited with –ffreestanding.
Basically I fixed the failing test cases by adding –ffreestanding which inhibits this behavior.
I fixed all the failing tests, including some in extra/test, there's a separate patch for that which is linked here
Note: this is a recommit after a test failure took down the original (r318669)
Patch By: mibintc
Differential Revision: https://reviews.llvm.org/D34158
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@320391 91177308-0d34-0410-b5e6-96231b3b80d8
This adds -std=c17, -std=gnu17, and -std=iso9899:2017 as language mode flags for C17 and updates the value of __STDC_VERSION__ to the value based on the C17 FDIS. Given that this ballot cannot succeed until 2018, it is expected that we (and GCC) will add c18 flags as aliases once the ballot passes.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@320089 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The -fxray-always-emit-customevents flag instructs clang to always emit
the LLVM IR for calls to the `__xray_customevent(...)` built-in
function. The default behaviour currently respects whether the function
has an `[[clang::xray_never_instrument]]` attribute, and thus not lower
the appropriate IR code for the custom event built-in.
This change allows users calling through to the
`__xray_customevent(...)` built-in to always see those calls lowered to
the corresponding LLVM IR to lay down instrumentation points for these
custom event calls.
Using this flag enables us to emit even just the user-provided custom
events even while never instrumenting the start/end of the function
where they appear. This is useful in cases where "phase markers" using
__xray_customevent(...) can have very few instructions, must never be
instrumented when entered/exited.
Reviewers: rnk, dblaikie, kpw
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D40601
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@319388 91177308-0d34-0410-b5e6-96231b3b80d8
This is a re-apply of r319294.
adds -fseh-exceptions and -fdwarf-exceptions flags
clang will check if the user has specified an exception model flag,
in the absense of specifying the exception model clang will then check
the driver default and append the model flag for that target to cc1
-fno-exceptions has a higher priority then specifying the model
move __SEH__ macro definitions out of Targets into InitPreprocessor
behind the -fseh-exceptions flag
move __ARM_DWARF_EH__ macrodefinitions out of verious targets and into
InitPreprocessor behind the -fdwarf-exceptions flag and arm|thumb check
remove unused USESEHExceptions from the MinGW Driver
fold USESjLjExceptions into a new GetExceptionModel function that
gives the toolchain classes more flexibility with eh models
Reviewers: rnk, mstorsjo
Differential Revision: https://reviews.llvm.org/D39673
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@319297 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts rL319294.
The windows sanitizer does not like seh on x86.
Will re apply with None type for x86
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@319295 91177308-0d34-0410-b5e6-96231b3b80d8
adds -fseh-exceptions and -fdwarf-exceptions flags
clang will check if the user has specified an exception model flag,
in the absense of specifying the exception model clang will then check
the driver default and append the model flag for that target to cc1
clang cc1 assumes dwarf is the default if none is passed
and -fno-exceptions has a higher priority then specifying the model
move __SEH__ macro definitions out of Targets into InitPreprocessor
behind the -fseh-exceptions flag
move __ARM_DWARF_EH__ macrodefinitions out of verious targets and into
InitPreprocessor behind the -fdwarf-exceptions flag and arm|thumb check
remove unused USESEHExceptions from the MinGW Driver
fold USESjLjExceptions into a new GetExceptionModel function that
gives the toolchain classes more flexibility with eh models
Reviewers: rnk, mstorsjo
Differential Revision: https://reviews.llvm.org/D39673
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@319294 91177308-0d34-0410-b5e6-96231b3b80d8
This is an instrumentation flag that's similar to
-finstrument-functions, but it only inserts calls on function entry, the
calls are inserted post-inlining, and they don't take any arugments.
This is intended for users who want to instrument function entry with
minimal overhead.
(-pg would be another alternative, but forces frame pointer emission and
affects link flags, so is probably best left alone to be used for
generating gcov data.)
Differential revision: https://reviews.llvm.org/D40276
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@318785 91177308-0d34-0410-b5e6-96231b3b80d8
As reported in llvm bugzilla 32377.
Here’s a patch to add preinclude of stdc-predef.h.
The gcc documentation says “On GNU/Linux, <stdc-predef.h> is pre-included.”
See https://gcc.gnu.org/gcc-4.8/porting_to.html;
The preinclude is inhibited with –ffreestanding.
Basically I fixed the failing test cases by adding –ffreestanding which inhibits
this behavior.
I fixed all the failing tests, including some in extra/test, there's a separate
patch for that which is linked here
Patch By: mibintc
Differential Revision: https://reviews.llvm.org/D34158
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@318669 91177308-0d34-0410-b5e6-96231b3b80d8
This updates -mcount to use the new attribute names (LLVM r318195), and
switches over -finstrument-functions to also use these attributes rather
than inserting instrumentation in the frontend.
It also adds a new flag, -finstrument-functions-after-inlining, which
makes the cygprofile instrumentation get inserted after inlining rather
than before.
Differential Revision: https://reviews.llvm.org/D39331
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@318199 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change allows generalizing pointers in type signatures used for
cfi-icall by enabling the -fsanitize-cfi-icall-generalize-pointers flag.
This works by 1) emitting an additional generalized type signature
metadata node for functions and 2) llvm.type.test()ing for the
generalized type for translation units with the flag specified.
This flag is incompatible with -fsanitize-cfi-cross-dso because it would
require emitting twice as many type hashes which would increase artifact
size.
Reviewers: pcc, eugenis
Reviewed By: pcc
Subscribers: kcc
Differential Revision: https://reviews.llvm.org/D39358
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@317044 91177308-0d34-0410-b5e6-96231b3b80d8
This patch breaks users using -fno-canonical-prefixes, for whom resolving
symlinks is not acceptable.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@316195 91177308-0d34-0410-b5e6-96231b3b80d8
Currently all the consecutive bitfields are wrapped as a large integer unless there is unamed zero sized bitfield in between. The patch provides an alternative manner which makes the bitfield to be accessed as separate memory location if it has legal integer width and is naturally aligned. Such separate bitfield may split the original consecutive bitfields into subgroups of consecutive bitfields, and each subgroup will be wrapped as an integer. Now This is all controlled by an option -ffine-grained-bitfield-accesses. The alternative of bitfield access manner can improve the access efficiency of those bitfields with legal width and being aligned, but may reduce the chance of load/store combining of other bitfields, so it depends on how the bitfields are defined and actually accessed to choose when to use the option. For now the option is off by default.
Differential revision: https://reviews.llvm.org/D36562
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@315915 91177308-0d34-0410-b5e6-96231b3b80d8
Move the logic for determining the `wchar_t` type information into the
driver. Rather than passing the single bit of information of
`-fshort-wchar` indicate to the frontend the desired type of `wchar_t`
through a new `-cc1` option of `-fwchar-type` and indicate the
signedness through `-f{,no-}signed-wchar`. This replicates the current
logic which was spread throughout Basic into the
`RenderCharacterOptions`.
Most of the changes to the tests are to ensure that the frontend uses
the correct type. Add a new test set under `test/Driver/wchar_t.c` to
ensure that we calculate the proper types for the various cases.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@315126 91177308-0d34-0410-b5e6-96231b3b80d8
Extend the -fmodule-file option to support the [<name>=]<file> value format.
If the name is omitted, then the old semantics is preserved (the module file
is loaded whether needed or not). If the name is specified, then the mapping
is treated as just another prebuilt module search mechanism, similar to
-fprebuilt-module-path, and the module file is only loaded if actually used
(e.g., via import). With one exception: this mapping also overrides module
file references embedded in other modules (which can be useful if module files
are moved/renamed as often happens during remote compilation).
This override semantics requires some extra work: we now store the module name
in addition to the file name in the serialized AST representation.
Reviewed By: rsmith
Differential Revision: https://reviews.llvm.org/D35020
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@312220 91177308-0d34-0410-b5e6-96231b3b80d8
Extend the -fmodule-file option to support the [<name>=]<file> value format.
If the name is omitted, then the old semantics is preserved (the module file
is loaded whether needed or not). If the name is specified, then the mapping
is treated as just another prebuilt module search mechanism, similar to
-fprebuilt-module-path, and the module file is only loaded if actually used
(e.g., via import). With one exception: this mapping also overrides module
file references embedded in other modules (which can be useful if module files
are moved/renamed as often happens during remote compilation).
This override semantics requires some extra work: we now store the module name
in addition to the file name in the serialized AST representation.
Reviewed By: rsmith
Differential Revision: https://reviews.llvm.org/D35020
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@312105 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
An implementation of ubsan runtime library suitable for use in production.
Minimal attack surface.
* No stack traces.
* Definitely no C++ demangling.
* No UBSAN_OPTIONS=log_file=/path (very suid-unfriendly). And no UBSAN_OPTIONS in general.
* as simple as possible
Minimal CPU and RAM overhead.
* Source locations unnecessary in the presence of (split) debug info.
* Values and types (as in A+B overflows T) can be reconstructed from register/stack dumps, once you know what type of error you are looking at.
* above two items save 3% binary size.
When UBSan is used with -ftrap-function=abort, sometimes it is hard to reason about failures. This library replaces abort with a slightly more informative message without much extra overhead. Since ubsan interface in not stable, this code must reside in compiler-rt.
Reviewers: pcc, kcc
Subscribers: srhines, mgorny, aprantl, krytarowski, llvm-commits
Differential Revision: https://reviews.llvm.org/D36810
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@312029 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a flag -fclang-abi-compat that can be used to request that
Clang attempts to be ABI-compatible with some older version of itself.
This is provided on a best-effort basis; right now, this can be used to undo
the ABI change in r310401, reverting Clang to its prior C++ ABI for pass/return
by value of class types affected by that change, and to undo the ABI change in
r262688, reverting Clang to using integer registers rather than SSE registers
for passing <1 x long long> vectors. The intent is that we will maintain this
backwards compatibility path as we make ABI-breaking fixes in future.
The reversion to the old behavior for r310401 is also applied to the PS4 target
since that change is not part of its platform ABI (which is essentially to do
whatever Clang 3.2 did).
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@311823 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: With accurate sample profile, we can do more aggressive size optimization. For some size-critical application, this can reduce the text size by 20%
Reviewers: davidxl, rsmith
Reviewed By: davidxl, rsmith
Subscribers: mehdi_amini, eraman, sanjoy, cfe-commits
Differential Revision: https://reviews.llvm.org/D37091
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@311707 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Augment SanitizerCoverage to insert maximum stack depth tracing for
use by libFuzzer. The new instrumentation is enabled by the flag
-fsanitize-coverage=stack-depth and is compatible with the existing
trace-pc-guard coverage. The user must also declare the following
global variable in their code:
thread_local uintptr_t __sancov_lowest_stack
https://bugs.llvm.org/show_bug.cgi?id=33857
Reviewers: vitalybuka, kcc
Reviewed By: vitalybuka
Subscribers: kubamracek, hiraditya, cfe-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D36839
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@311186 91177308-0d34-0410-b5e6-96231b3b80d8
basic block vectorizer. This vectorizer has had no known users for many,
many years and is completely surpassed by the normal
'-fvectorize-slp'-controlled SLP vectorizer in LLVM.
Hal proposed this back in 2014 to no objections:
http://lists.llvm.org/pipermail/llvm-dev/2014-November/079091.html
While this patch completely removes the flag, Joerg is working on
a patch that will add it back in a way that warns users and ignores the
flag in a clear and well factored way (so that we can keep doing this
going forward).
Differential Revision: https://reviews.llvm.org/D34846
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@306786 91177308-0d34-0410-b5e6-96231b3b80d8
Hal Finkel