nested-name-specifiers. Also includes fixes to the generation of
nested-name-specifier result in the non-cached case; we were producing
lame results for namespaces and namespace aliases, which (1) didn't
always have nested-name-specifiers when we want them, and (2) did not
have the necessary "::" as part of the completion.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@111203 91177308-0d34-0410-b5e6-96231b3b80d8
type class, so that we can adjust priorities appropriately when the
preferred type for the context and the actual type of the completion
are similar.
This gets us one step closer to parity of the cached completion
results with the non-cached completion results.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@111139 91177308-0d34-0410-b5e6-96231b3b80d8
declarations (in addition to macros). Each kind of declaration maps to
a certain set of completion contexts, and the ASTUnit completion logic
introduces the completion strings for those declarations if the actual
code-completion occurs in one of the contexts where it matters.
There are a few new code-completion-context kinds. Without these,
certain completions (e.g., after "using namespace") would need to
suppress all global completions, which would be unfortunate.
Note that we don't get the priorities right for global completions,
because we don't have enough type information. We'll need a way to
compare types in an ASTContext-agnostic way before this can be
implemented.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@111093 91177308-0d34-0410-b5e6-96231b3b80d8
when the CXTranslationUnit_CacheCompletionResults option is given to
clang_parseTranslationUnit(). Essentially, we compute code-completion
results for macro definitions after we have parsed the file, then
store an ASTContext-agnostic version of those results (completion
string, cursor kind, priority, and active contexts) in the
ASTUnit. When performing code completion in that ASTUnit, we splice
the macro definition results into the results provided by the actual
code-completion (which has had macros turned off) before libclang gets
those results. We use completion context information to only splice in
those results that make sense for that context.
With a completion involving all of the macros from Cocoa.h and a few other
system libraries (totally ~8500 macro definitions) living in a
precompiled header, we get about a 9% performance improvement from
code completion, since we no longer have to deserialize all of the
macro definitions from the precompiled header.
Note that macro definitions are merely the canary; the cache is
designed to also support other top-level declarations, which should be
a bigger performance win. That optimization will be next.
Note also that there is no mechanism for determining when to throw
away the cache and recompute its contents.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@111051 91177308-0d34-0410-b5e6-96231b3b80d8
the code-completion consumer. The consumer can use this information to
augument, filter, or display the code-completion results.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@110858 91177308-0d34-0410-b5e6-96231b3b80d8
and create separate decl nodes for forward declarations and the
definition," which appears to be causing significant Objective-C
breakage.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@110803 91177308-0d34-0410-b5e6-96231b3b80d8
- Eagerly create ObjCInterfaceTypes for declarations.
- The two above changes lead to a 0.5% increase in memory use and no speed regression when parsing Cocoa.h. On the other hand, now chained PCH works when there's a forward declaration in one PCH and the interface definition in another.
- Add HandleInterestingDecl to ASTConsumer. PCHReader passes the "interesting" decls it finds to this function instead of HandleTopLevelDecl. The default implementation forwards to HandleTopLevelDecl, but ASTUnit's handler for example ignores them. This fixes a potential crash when lazy loading of PCH data would cause ASTUnit's "top level" declaration collection to change while being iterated.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@110610 91177308-0d34-0410-b5e6-96231b3b80d8
completion within the translation unit using the same command-line
arguments for parsing the translation unit. Eventually, we'll reuse
the precompiled preamble to improve code-completion performance, and
this also gives us a place to cache results.
Expose this function via the new libclang function
clang_codeCompleteAt(), which performs the code completion within a
CXTranslationUnit. The completion occurs in-process
(clang_codeCompletion() runs code completion out-of-process).
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@110210 91177308-0d34-0410-b5e6-96231b3b80d8
condition is not of enumeration type, provide code-completion results
containing all values of integral or enumeral type.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@109677 91177308-0d34-0410-b5e6-96231b3b80d8
strip cv-qualifiers from the expression's type when the language calls
for it: in C, that's all the time, while C++ only does it for
non-class types.
Centralized the computation of the call expression type in
QualType::getCallResultType() and some helper functions in other nodes
(FunctionDecl, ObjCMethodDecl, FunctionType), and updated all relevant
callers of getResultType() to getCallResultType().
Fixes PR7598 and PR7463, along with a bunch of getResultType() call
sites that weren't stripping references off the result type (nothing
stripped cv-qualifiers properly before this change).
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@108234 91177308-0d34-0410-b5e6-96231b3b80d8
selector of an Objective-C method declaration, e.g., given
- (int)first:(int)x second:(int)y;
this code completion point triggers at the location of "second". It
will provide completions that fill out the method declaration for any
known method, anywhere in the translation unit.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@107929 91177308-0d34-0410-b5e6-96231b3b80d8
priority as other constants. And, if we're in a place where we prefer
a pointer type, consider "nil" and "NULL" to be close matches.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@107910 91177308-0d34-0410-b5e6-96231b3b80d8
bring in the entire lookup table at once.
Also, give ExternalSemaSource's vtable a home. This is important because otherwise
any reference to it will cause RTTI to be emitted, and since clang is compiled
with -fno-rtti, that RTTI will contain unresolved references (to ExternalASTSource's
RTTI). So this change makes it possible to subclass ExternalSemaSource from projects
compiled with RTTI, as long as the subclass's home is compiled with -fno-rtti.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@105268 91177308-0d34-0410-b5e6-96231b3b80d8
type that we expect to see at a given point in the grammar, e.g., when
initializing a variable, returning a result, or calling a function. We
don't prune the candidate set at all, just adjust priorities to favor
things that should type-check, using an ultra-simplified type system.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@105128 91177308-0d34-0410-b5e6-96231b3b80d8
expression context in C/Objective-C, or when we're in an
@interface/@implementation/@protocol in Objective-C(++).
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@104908 91177308-0d34-0410-b5e6-96231b3b80d8
message. This completion gives better results than just using the
"expression" completion, which is effectively what happened before.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@104895 91177308-0d34-0410-b5e6-96231b3b80d8
1) Suppress diagnostics as soon as we form the code-completion
token, so we don't get any error/warning spew from the early
end-of-file.
2) If we consume a code-completion token when we weren't expecting
one, go into a code-completion recovery path that produces the best
results it can based on the context that the parser is in.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@104585 91177308-0d34-0410-b5e6-96231b3b80d8
ObjCObjectType, which is basically just a pair of
one of {primitive-id, primitive-Class, user-defined @class}
with
a list of protocols.
An ObjCObjectPointerType is therefore just a pointer which always points to
one of these types (possibly sugared). ObjCInterfaceType is now just a kind
of ObjCObjectType which happens to not carry any protocols.
Alter a rather large number of use sites to use ObjCObjectType instead of
ObjCInterfaceType. Store an ObjCInterfaceType as a pointer on the decl rather
than hashing them in a FoldingSet. Remove some number of methods that are no
longer used, at least after this patch.
By simplifying ObjCObjectPointerType, we are now able to easily remove and apply
pointers to Objective-C types, which is crucial for a certain kind of ObjC++
metaprogramming common in WebKit.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@103870 91177308-0d34-0410-b5e6-96231b3b80d8
already knows what context it's looking in. Just pass that context in
instead of (questionably) recalculating it.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@102818 91177308-0d34-0410-b5e6-96231b3b80d8
way that C does. Among other differences, elaborated type specifiers
are defined to skip "non-types", which, as you might imagine, does not
include typedefs. Rework our use of IDNS masks to capture the semantics
of different kinds of declarations better, and remove most current lookup
filters. Removing the last remaining filter is more complicated and will
happen in a separate patch.
Fixes PR 6885 as well some spectrum of unfiled bugs.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@102164 91177308-0d34-0410-b5e6-96231b3b80d8
sends. Major changes include:
- Expanded the interface from two actions (ActOnInstanceMessage,
ActOnClassMessage), where ActOnClassMessage also handled sends to
"super" by checking whether the identifier was "super", to three
actions (ActOnInstanceMessage, ActOnClassMessage,
ActOnSuperMessage). Code completion has the same changes.
- The parser now resolves the type to which we are sending a class
message, so ActOnClassMessage now accepts a TypeTy* (rather than
an IdentifierInfo *). This opens the door to more interesting
types (for Objective-C++ support).
- Split ActOnInstanceMessage and ActOnClassMessage into parser
action functions (with their original names) and semantic
functions (BuildInstanceMessage and BuildClassMessage,
respectively). At present, this split is onyl used by
ActOnSuperMessage, which decides which kind of super message it
has and forwards to the appropriate Build*Message. In the future,
Build*Message will be used by template instantiation.
- Use getObjCMessageKind() within the disambiguation of Objective-C
message sends vs. array designators.
Two notes about substandard bits in this patch:
- There is some redundancy in the code in ParseObjCMessageExpr and
ParseInitializerWithPotentialDesignator; this will be addressed
shortly by centralizing the mapping from identifiers to type names
for the message receiver.
- There is some #if 0'd code that won't likely ever be used---it
handles the use of 'super' in methods whose class does not have a
superclass---but could be used to model GCC's behavior more
closely. This code will die in my next check-in, but I want it in
Subversion.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@102021 91177308-0d34-0410-b5e6-96231b3b80d8
expressions, to improve source-location information, clarify the
actual receiver of the message, and pave the way for proper C++
support. The ObjCMessageExpr node represents four different kinds of
message sends in a single AST node:
1) Send to a object instance described by an expression (e.g., [x method:5])
2) Send to a class described by the class name (e.g., [NSString method:5])
3) Send to a superclass class (e.g, [super method:5] in class method)
4) Send to a superclass instance (e.g., [super method:5] in instance method)
Previously these four cases where tangled together. Now, they have
more distinct representations. Specific changes:
1) Unchanged; the object instance is represented by an Expr*.
2) Previously stored the ObjCInterfaceDecl* referring to the class
receiving the message. Now stores a TypeSourceInfo* so that we know
how the class was spelled. This both maintains typedef information
and opens the door for more complicated C++ types (e.g., dependent
types). There was an alternative, unused representation of these
sends by naming the class via an IdentifierInfo *. In practice, we
either had an ObjCInterfaceDecl *, from which we would get the
IdentifierInfo *, or we fell into the case below...
3) Previously represented by a class message whose IdentifierInfo *
referred to "super". Sema and CodeGen would use isStr("super") to
determine if they had a send to super. Now represented as a
"class super" send, where we have both the location of the "super"
keyword and the ObjCInterfaceDecl* of the superclass we're
targetting (statically).
4) Previously represented by an instance message whose receiver is a
an ObjCSuperExpr, which Sema and CodeGen would check for via
isa<ObjCSuperExpr>(). Now represented as an "instance super" send,
where we have both the location of the "super" keyword and the
ObjCInterfaceDecl* of the superclass we're targetting
(statically). Note that ObjCSuperExpr only has one remaining use in
the AST, which is for "super.prop" references.
The new representation of ObjCMessageExpr is 2 pointers smaller than
the old one, since it combines more storage. It also eliminates a leak
when we loaded message-send expressions from a precompiled header. The
representation also feels much cleaner to me; comments welcome!
This patch attempts to maintain the same semantics we previously had
with Objective-C message sends. In several places, there are massive
changes that boil down to simply replacing a nested-if structure such
as:
if (message has a receiver expression) {
// instance message
if (isa<ObjCSuperExpr>(...)) {
// send to super
} else {
// send to an object
}
} else {
// class message
if (name->isStr("super")) {
// class send to super
} else {
// send to class
}
}
with a switch
switch (E->getReceiverKind()) {
case ObjCMessageExpr::SuperInstance: ...
case ObjCMessageExpr::Instance: ...
case ObjCMessageExpr::SuperClass: ...
case ObjCMessageExpr::Class:...
}
There are quite a few places (particularly in the checkers) where
send-to-super is effectively ignored. I've placed FIXMEs in most of
them, and attempted to address send-to-super in a reasonable way. This
could use some review.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@101972 91177308-0d34-0410-b5e6-96231b3b80d8
in case it ends up doing something that might trigger diagnostics
(template instantiation, ambiguity reporting, access
reporting). Noticed while working on PR6831.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@101412 91177308-0d34-0410-b5e6-96231b3b80d8
definitions, e.g., after
-
or
- (id)
we'll find all of the "likely" instance methods that one would want to
declare or define at this point. In the latter case, we only produce
results whose return types match "id".
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@100587 91177308-0d34-0410-b5e6-96231b3b80d8
while we're completing in the middle of a function call), also produce
"ordinary" name results that show what can be typed at that point.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@100558 91177308-0d34-0410-b5e6-96231b3b80d8
statement or for ordinary names. This means that we won't show macros
when completing, e.g., member expressions such as "p->".
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@100555 91177308-0d34-0410-b5e6-96231b3b80d8
presence of precompiled headers by forcibly loading all of the
methods we know about from the PCH file before constructing our
code-completion list.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@100535 91177308-0d34-0410-b5e6-96231b3b80d8
"id" or an expression of type "id". In these cases, we produce a list
of all of the (class or instance) methods, respectively, that we know about.
Note that this implementation does not yet work well with precompiled
headers; that's coming soon.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@100528 91177308-0d34-0410-b5e6-96231b3b80d8
of file locations for anonymous tag types (e.g., "enum <anonymous at
t.h:15:6>"), which can get rather long.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@100470 91177308-0d34-0410-b5e6-96231b3b80d8
entity (if applicable) which was actually looked up. If a candidate was found
via a using declaration, this is the UsingShadowDecl; otherwise, if
the candidate is template specialization, this is the template; otherwise,
this is the function.
The point of this exercise is that "found declarations" are the entities
we do access control for, not their underlying declarations. Broadly speaking,
this patch fixes access control for using declarations.
There is a *lot* of redundant code calling into the overload-resolution APIs;
we really ought to clean that up.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@98945 91177308-0d34-0410-b5e6-96231b3b80d8
I'm expecting this portion of the AST to grow and change, and I'd like to
be able to do that with minimal recompilation. If this proves unnecessary
when access control is fully-implemented, I'll fold the classes back into
DeclCXX.h.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@98249 91177308-0d34-0410-b5e6-96231b3b80d8
which has the label map, switch statement stack, etc. Previously, we
had a single set of maps in Sema (for the function) along with a stack
of block scopes. However, this lead to funky behavior with nested
functions, e.g., in the member functions of local classes.
The explicit-stack approach is far cleaner, and we retain a 1-element
cache so that we're not malloc/free'ing every time we enter a
function. Fixes PR6382.
Also, tweaked the unused-variable warning suppression logic to look at
errors within a given Scope rather than within a given function. The
prior code wasn't looking at the right number-of-errors count when
dealing with blocks, since the block's count would be deallocated
before we got to ActOnPopScope. This approach works with nested
blocks/functions, and gives tighter error recovery.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@97518 91177308-0d34-0410-b5e6-96231b3b80d8
may be some other places that could take advantage of this new information,
but I haven't really looked yet.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@95600 91177308-0d34-0410-b5e6-96231b3b80d8
lvalue-to-rvalue conversion adjusts lvalues of qualified, non-class
type to rvalue expressions of the unqualified variant of that
type. For example, given:
const int i;
(void)(i + 17);
the lvalue-to-rvalue conversion for the subexpression "i" will turn it
from an lvalue expression (a DeclRefExpr) with type 'const int' into
an rvalue expression with type 'int'. Both C and C++ mandate this
conversion, and somehow we've slid through without implementing it.
We now have both DefaultFunctionArrayConversion and
DefaultFunctionArrayLvalueConversion, and which gets used depends on
whether we do the lvalue-to-rvalue conversion or not. Generally, we do
the lvalue-to-rvalue conversion, but there are a few notable
exceptions:
- the left-hand side of a '.' operator
- the left-hand side of an assignment
- a C++ throw expression
- a subscript expression that's subscripting a vector
Making this change exposed two issues with blocks:
- we were deducing const-qualified return types of non-class type
from a block return, which doesn't fit well
- we weren't always setting the known return type of a block when it
was provided with the ^return-type syntax
Fixes the current Clang-on-Clang compile failure and PR6076.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@95167 91177308-0d34-0410-b5e6-96231b3b80d8
after adding the ability to determine whether our lookup is a
base-class lookup. Eliminate CollectMemberLookupResults, since it is
no longer used (yay).
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@93428 91177308-0d34-0410-b5e6-96231b3b80d8
than traversing visible declarations twice, only perform one traversal
and recognize nested-name-specifiers as special.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@93418 91177308-0d34-0410-b5e6-96231b3b80d8
provided nested-name-specifier results for base classes (only), rather
than everything that could possibly be a nested-name-specifier.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@93398 91177308-0d34-0410-b5e6-96231b3b80d8
LookupVisibleDecls, unifying the name lookup mechanisms used by code
completion and typo correction. Aside from the software-engineering
improvements, this makes code-completion see through using directives
and see ivars when performing unqualified name lookup in an
Objective-C instance method.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@93397 91177308-0d34-0410-b5e6-96231b3b80d8
the "typed" text, first, then take into account
nested-name-specifiers, name hiding, etc. This means that the
resulting sort is actually alphabetical :)
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@93370 91177308-0d34-0410-b5e6-96231b3b80d8
provide completions for @ keywords. Previously, we only provided
@-completions after an @ was actually typed, which is useful but
probably not the common case.
Also, make sure a few Objective-C 2.0 completions only show up when
Objective-C 2.0 support is enabled (the default).
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@93354 91177308-0d34-0410-b5e6-96231b3b80d8
C++ grammatical constructs that show up in top-level (namespace-level)
declarations, member declarations, template declarations, statements,
expressions, conditions, etc. For example, we now provide a pattern
for
static_cast<type>(expr)
when we can have an expression, or
using namespace identifier;
when we can have a using directive.
Also, improves the results of code completion at the beginning of a
top-level declaration. Previously, we would see value names (function
names, global variables, etc.); now we see types, namespace names,
etc., but no values.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@93134 91177308-0d34-0410-b5e6-96231b3b80d8
tring str2;
we produce the following diagnostic + fix-it:
typo.cpp:15:1: error: unknown type name 'tring'; did you mean 'string'?
tring str2;
^~~~~
string
To make this really useful, we'll need to introduce typo correction in
many more places (wherever we do name lookup), and implement
declaration-vs-expression heuristics that cope with typos
better. However, for now this will handle the simple cases where we
already get good "unknown type name" diagnostics.
The LookupVisibleDecls functions are intended to be used by code
completion as well as typo correction; that refactoring will happen
later.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@92308 91177308-0d34-0410-b5e6-96231b3b80d8
function in a C++ call using an arbitrary call-expression type.
Actually exploit this to fix the recovery implemented earlier.
The diagnostic is still iffy, though.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@91538 91177308-0d34-0410-b5e6-96231b3b80d8
Remove isPod() from DenseMapInfo, splitting it out to its own
isPodLike type trait. This is a generally useful type trait for
more than just DenseMap, and we really care about whether something
acts like a pod, not whether it really is a pod.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@91422 91177308-0d34-0410-b5e6-96231b3b80d8
specializations and class template partial specializations (they're
never named directly). Also, member access expressions only refer to
value declarations (fields, functions, enumerators, etc.) and
Objective-C property declarations; filter out everything else.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@91133 91177308-0d34-0410-b5e6-96231b3b80d8
DependentScopeDeclRefExpr support storing templateids. Unite the common
code paths between ActOnDeclarationNameExpr and ActOnTemplateIdExpr.
This gets us to a point where we don't need to store function templates in
the AST using TemplateNames, which is critical to ripping out OverloadedFunction.
Also resolves a few FIXMEs.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@89785 91177308-0d34-0410-b5e6-96231b3b80d8
into pretty much everything about overload resolution in order to wean
BuildDeclarationNameExpr off LookupResult::getAsSingleDecl(). Replace
UnresolvedFunctionNameExpr with UnresolvedLookupExpr, which generalizes the
idea of a non-member lookup that we haven't totally resolved yet, whether by
overloading, argument-dependent lookup, or (eventually) the presence of
a function template in the lookup results.
Incidentally fixes a problem with argument-dependent lookup where we were
still performing ADL even when the lookup results contained something from
a block scope.
Incidentally improves a diagnostic when using an ObjC ivar from a class method.
This just fell out from rewriting BuildDeclarationNameExpr's interaction with
lookup, and I'm too apathetic to break it out.
The only remaining uses of OverloadedFunctionDecl that I know of are in
TemplateName and MemberExpr.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@89544 91177308-0d34-0410-b5e6-96231b3b80d8
provide completion results before each keyword argument, e.g.,
[foo Method:arg WithArg1:arg1 WithArg2:arg2]
We now complete before "WithArg1" and before "WithArg2", in addition
to completing before "Method".
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@89290 91177308-0d34-0410-b5e6-96231b3b80d8
declaration by providing patterns for "getter = <method>" and "setter
= <method>". As part of this, invented a new "pattern" result kind
that is merely a semantic string. The "pattern" result kind should
help with other kinds of code templates.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@89277 91177308-0d34-0410-b5e6-96231b3b80d8
code to find and add Objective-C methods (starting at an
ObjCContainerDecl) into a single, static function. Also, make sure
that we search into the implementations of classes and categories to
find even more methods.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@89163 91177308-0d34-0410-b5e6-96231b3b80d8
- Provide Sema in callbacks, instead of requiring it in constructor. This
eliminates the need for a factory function. Clients now just pass the object
to consume the results in directly.
- CodeCompleteConsumer is cheap to construct, so building it whenever we are
doing code completion is reasonable.
Doug, please review.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@87099 91177308-0d34-0410-b5e6-96231b3b80d8
when looking for a name within a given DeclContext. Now enumerators
will show up in code-completion results.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@86591 91177308-0d34-0410-b5e6-96231b3b80d8
- Introduce more code-completion string "chunk" kinds that describe
symbols, the actual text that the user is expected to type, etc.
- Make the generation of macro results optional, since it can be
slow
- Make code-completion accessible through the C API, marshalling the
code-completion results through a temporary file (ick) to maintain
process separation.
The last doesn't have tests yet.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@86306 91177308-0d34-0410-b5e6-96231b3b80d8
types. Preserve it through template instantiation. Preserve it through PCH,
although TSTs themselves aren't serializable, so that's pretty much meaningless.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@85500 91177308-0d34-0410-b5e6-96231b3b80d8
qualified reference to a declaration that is not a non-static data
member or non-static member function, e.g.,
namespace N { int i; }
int j = N::i;
Instead, extend DeclRefExpr to optionally store the qualifier. Most
clients won't see or care about the difference (since
QualifierDeclRefExpr inherited DeclRefExpr). However, this reduces the
number of top-level expression types that clients need to cope with,
brings the implementation of DeclRefExpr into line with MemberExpr,
and simplifies and unifies our handling of declaration references.
Extended DeclRefExpr to (optionally) store explicitly-specified
template arguments. This occurs when naming a declaration via a
template-id (which will be stored in a TemplateIdRefExpr) that,
following template argument deduction and (possibly) overload
resolution, is replaced with a DeclRefExpr that refers to a template
specialization but maintains the template arguments as written.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@84962 91177308-0d34-0410-b5e6-96231b3b80d8
- Filter out unnamed declarations
- Filter out declarations whose names are reserved for the
implementation (e.g., __bar, _Foo)
- Place OVERLOAD: or COMPLETION: at the beginning of each
code-completion result, so we can easily separate them from other
compilation results.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@83680 91177308-0d34-0410-b5e6-96231b3b80d8
lookup in a member access expression always start a
nested-name-specifier. Additionally, rank names that start
nested-name-specifiers after other names.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@82663 91177308-0d34-0410-b5e6-96231b3b80d8
results for other, textual completion. For call completion, we now
produce enough information to show the function call argument that we
are currently on.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@82592 91177308-0d34-0410-b5e6-96231b3b80d8
the start of a nested-name-specifier, add the "::" after the
nested-name-specifier to the code-completion string.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@82587 91177308-0d34-0410-b5e6-96231b3b80d8
members found in base classes have the same ranking as members found
in derived classes. However, we will introduce an informative note for
members found in base classes, showing (as a nested-name-specifier)
the qualification to name the base class, to make it clear which
members are from bases.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@82586 91177308-0d34-0410-b5e6-96231b3b80d8
opening parentheses and after each comma. We gather the set of visible
overloaded functions, perform "partial" overloading based on the set
of arguments that we have thus far, and return the still-viable
results sorted by the likelihood that they will be the best candidate.
Most of the changes in this patch are a refactoring of the overloading
routines for a function call, since we needed to separate out the
notion of building an overload set (common to code-completion and
normal semantic analysis) and then what to do with that overload
set. As part of this change, I've pushed explicit template arguments
into a few more subroutines.
There is still much more work to do in this area. Function templates
won't be handled well (unless we happen to deduce all of the template
arguments before we hit the completion point), nor will overloaded
function-call operators or calls to member functions.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@82549 91177308-0d34-0410-b5e6-96231b3b80d8
a nested-name-specifier that describes how to refer to that name. For
example, given:
struct Base { int member; };
struct Derived : Base { int member; };
the code-completion result for a member access into "Derived" will
provide both "member" to refer to Derived::member (no qualification needed) and
"Base::member" to refer to Base::member (qualification included).
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@82476 91177308-0d34-0410-b5e6-96231b3b80d8
enumerators when either the user intentionally wrote a qualified name
(in which case we just use that nested-name-specifier to match
the user's code) or when this is the first "case" statement and we
need a qualified name to refer to an enumerator in a different scope.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@82474 91177308-0d34-0410-b5e6-96231b3b80d8
real work is performed within Sema. Addresses Chris's comments, but
still retains the heavyweight list-of-multimaps data structure.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@82459 91177308-0d34-0410-b5e6-96231b3b80d8
- after "using", show anything that can be a nested-name-specifier.
- after "using namespace", show any visible namespaces or namespace aliases
- after "namespace", show any namespace definitions in the current scope
- after "namespace identifier = ", show any visible namespaces or
namespace aliases
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@82251 91177308-0d34-0410-b5e6-96231b3b80d8
will provide the names of various enumerations currently
visible. Introduced filtering of code-completion results when we build
the result set, so that we can identify just the kinds of declarations
we want.
This implementation is incomplete for C++, since we don't consider
that the token after the tag keyword could start a
nested-name-specifier.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@82222 91177308-0d34-0410-b5e6-96231b3b80d8
essence, code completion is triggered by a magic "code completion"
token produced by the lexer [*], which the parser recognizes at
certain points in the grammar. The parser then calls into the Action
object with the appropriate CodeCompletionXXX action.
Sema implements the CodeCompletionXXX callbacks by performing minimal
translation, then forwarding them to a CodeCompletionConsumer
subclass, which uses the results of semantic analysis to provide
code-completion results. At present, only a single, "printing" code
completion consumer is available, for regression testing and
debugging. However, the design is meant to permit other
code-completion consumers.
This initial commit contains two code-completion actions: one for
member access, e.g., "x." or "p->", and one for
nested-name-specifiers, e.g., "std::". More code-completion actions
will follow, along with improved gathering of code-completion results
for the various contexts.
[*] In the current -code-completion-dump testing/debugging mode, the
file is truncated at the completion point and EOF is translated into
"code completion".
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@82166 91177308-0d34-0410-b5e6-96231b3b80d8
Douglas Gregor