separately from building the instruction so that it's
preserved even in -Asserts builds.
Employ C++'s mystical "comment" feature to discourage
breaking this in the future.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@246991 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce an Address type to bundle a pointer value with an
alignment. Introduce APIs on CGBuilderTy to work with Address
values. Change core APIs on CGF/CGM to traffic in Address where
appropriate. Require alignments to be non-zero. Update a ton
of code to compute and propagate alignment information.
As part of this, I've promoted CGBuiltin's EmitPointerWithAlignment
helper function to CGF and made use of it in a number of places in
the expression emitter.
The end result is that we should now be significantly more correct
when performing operations on objects that are locally known to
be under-aligned. Since alignment is not reliably tracked in the
type system, there are inherent limits to this, but at least we
are no longer confused by standard operations like derived-to-base
conversions and array-to-pointer decay. I've also fixed a large
number of bugs where we were applying the complete-object alignment
to a pointer instead of the non-virtual alignment, although most of
these were hidden by the very conservative approach we took with
member alignment.
Also, because IRGen now reliably asserts on zero alignments, we
should no longer be subject to an absurd but frustrating recurring
bug where an incomplete type would report a zero alignment and then
we'd naively do a alignmentAtOffset on it and emit code using an
alignment equal to the largest power-of-two factor of the offset.
We should also now be emitting much more aggressive alignment
attributes in the presence of over-alignment. In particular,
field access now uses alignmentAtOffset instead of min.
Several times in this patch, I had to change the existing
code-generation pattern in order to more effectively use
the Address APIs. For the most part, this seems to be a strict
improvement, like doing pointer arithmetic with GEPs instead of
ptrtoint. That said, I've tried very hard to not change semantics,
but it is likely that I've failed in a few places, for which I
apologize.
ABIArgInfo now always carries the assumed alignment of indirect and
indirect byval arguments. In order to cut down on what was already
a dauntingly large patch, I changed the code to never set align
attributes in the IR on non-byval indirect arguments. That is,
we still generate code which assumes that indirect arguments have
the given alignment, but we don't express this information to the
backend except where it's semantically required (i.e. on byvals).
This is likely a minor regression for those targets that did provide
this information, but it'll be trivial to add it back in a later
patch.
I partially punted on applying this work to CGBuiltin. Please
do not add more uses of the CreateDefaultAligned{Load,Store}
APIs; they will be going away eventually.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@246985 91177308-0d34-0410-b5e6-96231b3b80d8
Sometimes we can provide an initializer for static locals, in which case
we sometimes might need to change the type. Changing the type requires
making a new LLVM GlobalVariable, and in this codepath we were
forgetting to transfer the comdat.
Fixes PR23838.
Patch by Ivan Garramona.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@242704 91177308-0d34-0410-b5e6-96231b3b80d8
Produce type parameter declarations for Objective-C type parameters,
and attach lists of type parameters to Objective-C classes,
categories, forward declarations, and extensions as
appropriate. Perform semantic analysis of type bounds for type
parameters, both in isolation and across classes/categories/extensions
to ensure consistency.
Also handle (de-)serialization of Objective-C type parameter lists,
along with sundry other things one must do to add a new declaration to
Clang.
Note that Objective-C type parameters are typedef name declarations,
like typedefs and C++11 type aliases, in support of type erasure.
Part of rdar://problem/6294649.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@241541 91177308-0d34-0410-b5e6-96231b3b80d8
The pattern was born out of the lack of range-based for loops in C++98
and is somewhat obscure. No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@241300 91177308-0d34-0410-b5e6-96231b3b80d8
Function static variables, typedefs and records (class, struct or union) declared inside
a lexical scope were associated with the function as their parent scope, rather than the
lexical scope they are defined or declared in.
This fixes PR19238
Patch by: amjad.aboud@intel.com
Differential Revision: http://reviews.llvm.org/D9760
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@241154 91177308-0d34-0410-b5e6-96231b3b80d8
The patch is generated using this command:
$ tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
work/llvm/tools/clang
To reduce churn, not touching namespaces spanning less than 10 lines.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@240270 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In addition to easier syntax, IRBuilder makes sure to set correct
debug locations for newly added instructions (bitcast and
llvm.lifetime itself). This restores the original behavior, which
was modified by r234581 (reapplied as r235553).
Extend one of the tests to check for debug locations.
Test Plan: regression test suite
Reviewers: aadg, dblaikie
Subscribers: cfe-commits, majnemer
Differential Revision: http://reviews.llvm.org/D10418
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@239643 91177308-0d34-0410-b5e6-96231b3b80d8
Functions with available_externally linkage will not be emitted to object
files (they will just be undefined symbols), so it does not make sense to
put them in comdats.
Creates a second overload of maybeSetTrivialComdat that uses the GlobalObject
instead of the Decl, and uses that in several places that had the faulty
logic.
Differential Revision: http://reviews.llvm.org/D9580
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@236879 91177308-0d34-0410-b5e6-96231b3b80d8
Fix for codegen of static variables declared inside of captured statements. Captured statements are actually a transparent DeclContexts, so we have to skip them when trying to get a mangled name for statics.
Differential Revision: http://reviews.llvm.org/D9522
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@236701 91177308-0d34-0410-b5e6-96231b3b80d8
In r235553, Clang started emitting lifetime markers more often. This
caused false negative in MSan, because MSan only poisons all allocas
once at function entry. Eventually, MSan should poison allocas at
lifetime start and probably also lifetime end, but until then, let's not
emit markers that aren't going to be useful.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@235613 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r234700. It turns out that the lifetime markers
were not the cause of Chromium failing but a bug which was uncovered by
optimizations exposed by the markers.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@235553 91177308-0d34-0410-b5e6-96231b3b80d8
Now that TailRecursionElimination has been fixed with r222354, the
threshold on size for lifetime marker insertion can be removed. This
only affects named temporary though, as the patch for unnamed temporaries
is still in progress.
My previous commit (r222993) was not handling debuginfo correctly, but
this could only be seen with some asan tests. Basically, lifetime markers
are just instrumentation for the compiler's usage and should not affect
debug information; however, the cleanup infrastructure was assuming it
contained only destructors, i.e. actual code to be executed, and was
setting the breakpoint for the end of the function to the closing '}', and
not the return statement, in order to show some destructors have been
called when leaving the function. This is wrong when the cleanups are only
lifetime markers, and this is now fixed.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@234581 91177308-0d34-0410-b5e6-96231b3b80d8
Looks like the VTable code in particular will need some work to pass
around the pointee type explicitly.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@234128 91177308-0d34-0410-b5e6-96231b3b80d8
of extern "C" declarations. This is simpler and vastly more efficient for
modules builds (we no longer need to load *all* extern "C" declarations to
determine if we have a redeclaration).
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@231538 91177308-0d34-0410-b5e6-96231b3b80d8
distinction between the different use-cases. With the previous default
behavior we would occasionally emit empty debug locations in situations
where they actually were strictly required (= on invoke insns).
We now have a choice between defaulting to an empty location or an
artificial location.
Specifically, this fixes a bug caused by a missing debug location when
emitting C++ EH cleanup blocks from within an artificial function, such as
an ObjC destroy helper function.
rdar://problem/19670595
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@228003 91177308-0d34-0410-b5e6-96231b3b80d8
Several pieces of code were relying on implicit debug location setting
which usually lead to incorrect line information anyway. So I've fixed
those (in r225955 and r225845) separately which should pave the way for
this commit to be cleanly reapplied.
The reason these implicit dependencies resulted in crashes with this
patch is that the debug location would no longer implicitly leak from
one place to another, but be set back to invalid. Once a call with
no/invalid location was emitted, if that call was ever inlined it could
produce invalid debugloc chains and assert during LLVM's codegen.
There may be further cases of such bugs in this patch - they're hard to
flush out with regression testing, so I'll keep an eye out for reports
and investigate/fix them ASAP if they come up.
Original commit message:
Reapply "DebugInfo: Generalize debug info location handling"
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Recommitted in r224941 and reverted in r224970 after it caused a crash
when building compiler-rt. Looks to be due to this change zeroing out
the debug location when emitting default arguments (which were meant to
inherit their outer expression's location) thus creating call
instructions without locations - these create problems for inlining and
must not be created. That is fixed and tested in this version of the
change.
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@225956 91177308-0d34-0410-b5e6-96231b3b80d8
The llvm IR until recently had no support for comdats. This was a problem when
targeting C++ on ELF/COFF as just using weak linkage would cause quite a bit of
dead bits to remain on the executable (unless -ffunction-sections,
-fdata-sections and --gc-sections were used).
To fix the problem, llvm's codegen will just assume that any weak or linkonce
that is not in an explicit comdat should be output in one with the same name as
the global.
This unfortunately breaks cases like pr19848 where a weak symbol is not
xpected to be part of any comdat.
Now that we have explicit comdats in the IR, we can finally get both cases
right.
This first patch just makes clang give explicit comdats to GlobalValues where
t is allowed to.
A followup patch to llvm will then stop implicitly producing comdats.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@225705 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r225000, r225021, r225083, r225086, r225090.
The root change (r225000) still has several issues where it's caused
calls to be emitted without debug locations. This causes assertion
failures if/when those calls are inlined.
I'll work up some test cases and fixes before recommitting this.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@225555 91177308-0d34-0410-b5e6-96231b3b80d8
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Recommitted in r224941 and reverted in r224970 after it caused a crash
when building compiler-rt. Looks to be due to this change zeroing out
the debug location when emitting default arguments (which were meant to
inherit their outer expression's location) thus creating call
instructions without locations - these create problems for inlining and
must not be created. That is fixed and tested in this version of the
change.
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@225000 91177308-0d34-0410-b5e6-96231b3b80d8
Asserting when building compiler-rt when using a GCC host compiler.
Reverting while I investigate.
This reverts commit r224941.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@224970 91177308-0d34-0410-b5e6-96231b3b80d8
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@224941 91177308-0d34-0410-b5e6-96231b3b80d8
Fails an ASan bootstrap - I'll try to reproduce locally & sort that out
before recommitting.
This reverts commit r224385.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@224441 91177308-0d34-0410-b5e6-96231b3b80d8
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@224385 91177308-0d34-0410-b5e6-96231b3b80d8
This particularly helps the fidelity of ASan reports (which can occur
even in these examples - if, for example, one uses placement new over a
buffer of insufficient size - now ASan will correctly identify which
member's initialization went over the end of the buffer).
This doesn't cover all types of members - more coming.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@223726 91177308-0d34-0410-b5e6-96231b3b80d8
Now that TailRecursionElimination has been fixed with r222354, the
threshold on size for lifetime marker insertion can be removed. This
only affects named temporary though, as the patch for unnamed temporaries
is still in progress.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@222993 91177308-0d34-0410-b5e6-96231b3b80d8
Local variables are not initialized, and every target has
been (incorrectly) ignoring the unnecessary request for
zero initialization.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@221162 91177308-0d34-0410-b5e6-96231b3b80d8
This patch generates some helper variables that used as private copies of the corresponding original variables inside an OpenMP 'parallel' directive. These generated variables are initialized by copy using values of the original variables (with the copy constructor, if any). For arrays, initializator is generated for single element and in the codegen procedure this initial value is automatically propagated between all elements of the private copy.
In outlined function, references to original variables are replaced by the references to these private helper variables. At the end of the initialization of the private variables an implicit barier is generated by calling __kmpc_barrier(...) runtime function to be sure that all threads were initialized using original values of the variables.
Differential Revision: http://reviews.llvm.org/D5140
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@219306 91177308-0d34-0410-b5e6-96231b3b80d8
Boostrapping LLVM+Clang+LLDB without threshold on object size for
lifetime markers insertion has shown there was no significant change
in compile time, so let the stack slot colorizer do its optimization
for all slots.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@219303 91177308-0d34-0410-b5e6-96231b3b80d8
This patch generates some helper variables that used as private copies of the corresponding original variables inside an OpenMP 'parallel' directive. These generated variables are initialized by copy using values of the original variables (with the copy constructor, if any). For arrays, initializator is generated for single element and in the codegen procedure this initial value is automatically propagated between all elements of the private copy.
In outlined function, references to original variables are replaced by the references to these private helper variables. At the end of the initialization of the private variables an implicit barier is generated by calling __kmpc_barrier(...) runtime function to be sure that all threads were initialized using original values of the variables.
Differential Revision: http://reviews.llvm.org/D5140
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@219297 91177308-0d34-0410-b5e6-96231b3b80d8
This patch generates some helper variables that used as private copies of the corresponding original variables inside an OpenMP 'parallel' directive. These generated variables are initialized by copy using values of the original variables (with the copy constructor, if any). For arrays, initializator is generated for single element and in the codegen procedure this initial value is automatically propagated between all elements of the private copy.
In outlined function, references to original variables are replaced by the references to these private helper variables. At the end of the initialization of the private variables an implicit barier is generated by calling __kmpc_barrier(...) runtime function to be sure that all threads were initialized using original values of the variables.
Differential Revision: http://reviews.llvm.org/D5140
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@219295 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Previously CodeGen assumed that static locals were emitted before they
could be accessed, which is true for automatic storage duration locals.
However, it is possible to have CodeGen emit a nested function that uses
a static local before emitting the function that defines the static
local, breaking that assumption.
Fix it by creating the static local upon access and ensuring that the
deferred function body gets emitted. We may not be able to emit the
initializer properly from outside the function body, so don't try.
Fixes PR18020. See also previous attempts to fix static locals in
PR6769 and PR7101.
Reviewers: rsmith
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D4787
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@219265 91177308-0d34-0410-b5e6-96231b3b80d8
NAKAMURA Takumi