A slightly weaker form of ODR checking than previous attempts, but hopefully
won't break the modules build bot. Future work will be needed to catch all
cases.
When objects are imported for modules, there is a chance that a name collision
will cause an ODR violation. Previously, only a small number of such
violations were detected. This patch provides a stronger check based on
AST nodes.
The information needed to uniquely identify an object is taken from the AST and
put into a one-dimensional byte stream. This stream is then hashed to give
a value to represent the object, which is stored with the other object data
in the module.
When modules are loaded, and Decl's are merged, the hash values of the two
Decl's are compared. Only Decl's with matched hash values will be merged.
Mismatch hashes will generate a module error, and if possible, point to the
first difference between the two objects.
The transform from AST to byte stream is a modified depth first algorithm.
Due to references between some AST nodes, a pure depth first algorithm could
generate loops. For Stmt nodes, a straight depth first processing occurs.
For Type and Decl nodes, they are replaced with an index number and only on
first visit will these nodes be processed. As an optimization, boolean
values are saved and stored together in reverse order at the end of the
byte stream to lower the ammount of data that needs to be hashed.
Compile time impact was measured at 1.5-2.0% during module building, and
negligible during builds without module building.
Differential Revision: https://reviews.llvm.org/D21675
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@295421 91177308-0d34-0410-b5e6-96231b3b80d8
Removed ndrange_t as Clang builtin type and added
as a struct type in the OpenCL header.
Use type name to do the Sema checking in enqueue_kernel
and modify IR generation accordingly.
Review: D28058
Patch by Dmitry Borisenkov!
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@295311 91177308-0d34-0410-b5e6-96231b3b80d8
Recommit r293585 that was reverted in r293611 with new fixes. The previous
issue was determined to be an overly aggressive AST visitor from forward
declared objects. The visitor will now only deeply visit certain Decl's and
only do a shallow information extraction from all other Decl's.
When objects are imported for modules, there is a chance that a name collision
will cause an ODR violation. Previously, only a small number of such
violations were detected. This patch provides a stronger check based on
AST nodes.
The information needed to uniquely identify an object is taken from the AST and
put into a one-dimensional byte stream. This stream is then hashed to give
a value to represent the object, which is stored with the other object data
in the module.
When modules are loaded, and Decl's are merged, the hash values of the two
Decl's are compared. Only Decl's with matched hash values will be merged.
Mismatch hashes will generate a module error, and if possible, point to the
first difference between the two objects.
The transform from AST to byte stream is a modified depth first algorithm.
Due to references between some AST nodes, a pure depth first algorithm could
generate loops. For Stmt nodes, a straight depth first processing occurs.
For Type and Decl nodes, they are replaced with an index number and only on
first visit will these nodes be processed. As an optimization, boolean
values are saved and stored together in reverse order at the end of the
byte stream to lower the ammount of data that needs to be hashed.
Compile time impact was measured at 1.5-2.0% during module building, and
negligible during builds without module building.
Differential Revision: https://reviews.llvm.org/D21675
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@295284 91177308-0d34-0410-b5e6-96231b3b80d8
We model deduction-guides as functions with a new kind of name that identifies
the template whose deduction they guide; the bulk of this patch is adding the
new name kind. This gives us a clean way to attach an extensible list of guides
to a class template in a way that doesn't require any special handling in AST
files etc (and we're going to need these functions we come to performing
deduction).
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@294266 91177308-0d34-0410-b5e6-96231b3b80d8
We're seeing what we believe are false positives. (It's hard to tell with the
available diagnostics, and I'm not sure how to reduce them yet).
I'll send Richard reproduction details offline.
djasper/chandlerc suggested this should be a warning for now, to make rolling it
out feasible.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@293611 91177308-0d34-0410-b5e6-96231b3b80d8
When objects are imported for modules, there is a chance that a name collision
will cause an ODR violation. Previously, only a small number of such
violations were detected. This patch provides a stronger check based on
AST nodes.
The information needed to uniquely identify an object is taked from the AST and
put into a one-dimensional byte stream. This stream is then hashed to give
a value to represent the object, which is stored with the other object data
in the module.
When modules are loaded, and Decl's are merged, the hash values of the two
Decl's are compared. Only Decl's with matched hash values will be merged.
Mismatch hashes will generate a module error, and if possible, point to the
first difference between the two objects.
The transform from AST to byte stream is a modified depth first algorithm.
Due to references between some AST nodes, a pure depth first algorithm could
generate loops. For Stmt nodes, a straight depth first processing occurs.
For Type and Decl nodes, they are replaced with an index number and only on
first visit will these nodes be processed. As an optimization, boolean
values are saved and stored together in reverse order at the end of the
byte stream to lower the ammount of data that needs to be hashed.
Compile time impact was measured at 1.5-2.0% during module building, and
negligible during builds without module building.
Differential Revision: https://reviews.llvm.org/D21675
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@293585 91177308-0d34-0410-b5e6-96231b3b80d8
This ensures the capability to index a module file using an existing ASTReader from a compiler instance or ASTUnit.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@293461 91177308-0d34-0410-b5e6-96231b3b80d8
First pass at generating weak definitions of inline functions from module files
(& skipping (-O0) or emitting available_externally (optimizations)
definitions where those modules are used).
External functions defined in modules are emitted into the modular
object file as well (this may turn an existing ODR violation (if that
module were imported into multiple translations) into valid/linkable
code).
Internal symbols (static functions, for example) are not correctly
supported yet. The symbol will be produced, internal, in the modular
object - unreferenceable from the users.
Reviewers: rsmith
Differential Revision: https://reviews.llvm.org/D28845
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@293456 91177308-0d34-0410-b5e6-96231b3b80d8
ModuleManager::removeModules always deletes a tail of the
ModuleManager::Chain. Change the API to enforce that so that we can
simplify the code inside.
There's no real functionality change, although there's a slight
performance hack to loop to the First deleted module instead of the
final module in the chain (skipping the about-to-be-deleted tail).
Also document something suspicious: we fail to clean deleted modules out
of ModuleFile::Imports.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@293398 91177308-0d34-0410-b5e6-96231b3b80d8
Hide the pointer indirection in ModuleManager::begin, ModuleManager::end,
ModuleManager::rbegin, and ModuleManager::rend. Besides tidying up the call
sites, this is preparation for making ownership of ModuleFile explicit.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@293394 91177308-0d34-0410-b5e6-96231b3b80d8
This change adds a new type node, DeducedTemplateSpecializationType, to
represent a type template name that has been used as a type. This is modeled
around AutoType, and shares a common base class for representing a deduced
placeholder type.
We allow deduced class template types in a few more places than the standard
does: in conditions and for-range-declarators, and in new-type-ids. This is
consistent with GCC and with discussion on the core reflector. This patch
does not yet support deduced class template types being named in typename
specifiers.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@293207 91177308-0d34-0410-b5e6-96231b3b80d8
Rather than storing a single flat list of SourceLocations where the diagnostic
state changes (in source order), we now store a separate list for each FileID
in which there is a diagnostic state transition. (State for other files is
built and cached lazily, on demand.) This has two consequences:
1) We can now sensibly support modules, and properly track the diagnostic state
for modular headers (this matters when, for instance, triggering instantiation
of a template defined within a module triggers diagnostics).
2) It's much faster than the old approach, since we can now just do a binary
search on the offsets within the FileID rather than needing to call
isBeforeInTranslationUnit to determine source order (which is surprisingly
slow). For some pathological (but real world) files, this reduces total
compilation time by more than 10%.
For now, the diagnostic state points for modules are loaded eagerly. It seems
feasible to defer this until diagnostic state information for one of the
module's files is needed, but that's not part of this patch.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@293123 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Add a callback from ASTReader to DeserializationListener when the former
reads an IMPORTED_MODULES block. This supports Swift in using PCH for
bridging headers.
Reviewers: doug.gregor, manmanren, bruno
Reviewed By: manmanren
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D28779
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@292436 91177308-0d34-0410-b5e6-96231b3b80d8
D28684 changed llvm::zlib to return Error instead of Status.
It was accepted and committed in r292214, but then reverted in r292217
because I missed that clang code also needs to be updated.
Patch do that.
D28684 recommitted again as r292226
Differential revision: https://reviews.llvm.org/D28807
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@292227 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
We do not currently track the source locations for exception specifications such
that their source range can be queried through the AST. This leads to trying to
write more complex code to determine the source range for uses like FixItHints
(see D18575 for an example). In addition to use within tools like clang-tidy, I
think this information may become more important to track as exception
specifications become more integrated into the type system.
Patch by Don Hinton.
Reviewers: rsmith
Subscribers: malcolm.parsons, sbarzowski, alexfh, hintonda, cfe-commits
Differential Revision: https://reviews.llvm.org/D20428
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@291771 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
For ASTDeclReader and ASTStmtReader, every parameter "unsigned &Idx" ultimately
comes from a variable that is defined on the stack, next to the RecordData. This
change moves that index into the ASTRecordReader.
TypeLocReader cannot be transitioned, due to TableGen-generated code which calls
ASTReader::GetTypeSourceInfo.
Reviewers: rsmith
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D27836
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@290217 91177308-0d34-0410-b5e6-96231b3b80d8
`RawComments` are sorted by comparing underlying `SourceLocation`'s. This is
done by comparing `FileID` and `Offset`; when the `FileID` is the same it means
the locations are within the same TU and the `Offset` is used.
FileID, from the source code: "A mostly-opaque identifier, where 0 is
"invalid", >0 is this module, and <-1 is something loaded from another
module.". That said, when de-serializing SourceLocations, FileID's from
RawComments loaded from other modules get negative IDs where previously they
were positive. This makes imported RawComments unsorted, leading to a wrong
merge with other comments from the current TU. Fix that by sorting RawComments
properly after de-serialization and before merge.
This fixes an assertion in `ASTContext::getRawCommentForDeclNoCache`,
which fires only in a debug build of clang.
Differential Revision: https://reviews.llvm.org/D27546
rdar://problem/29287314
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@290134 91177308-0d34-0410-b5e6-96231b3b80d8
Added a map to associate types and declarations with extensions.
Refactored existing diagnostic for disabled types associated with extensions and extended it to declarations for generic situation.
Fixed some bugs for types associated with extensions.
Allow users to use pragma to declare types and functions for supported extensions, e.g.
#pragma OPENCL EXTENSION the_new_extension_name : begin
// declare types and functions associated with the extension here
#pragma OPENCL EXTENSION the_new_extension_name : end
Differential Revision: https://reviews.llvm.org/D21698
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@289979 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When reading an ASTRecord, each RecordData is logically contained within a
single ModuleFile, and global(er) state is contained by a single ASTReader. This
means that any operations that read from a RecordData and reference an ASTReader
or a ModuleFile, will always reference the same ASTReader or ModuleFile.
ASTRecordReader groups these together so that parameters don't need to be
duplicated ad infinitum. Most uses of the Idx variable seem to be redunant
aliases as well, but I'll leave that for now.
Reviewers: rsmith
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D27784
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@289870 91177308-0d34-0410-b5e6-96231b3b80d8
copy constructors of classes with array members, instead using
ArrayInitLoopExpr to represent the initialization loop.
This exposed a bug in the static analyzer where it was unable to differentiate
between zero-initialized and unknown array values, which has also been fixed
here.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@289618 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The Swift frontend is acquiring the ability to load non-module PCH files containing
bridging definitions from C/ObjC. As part of this work, it needs to know which submodules
were imported by a PCH in order to wrap them in local Swift modules. This information
is collected by ASTReader::ReadAST in a local vector, but is currently kept private.
The change here is just to make the type of the vector elements public, and provide
an optional out-parameter to the ReadAST method to provide the vector's contents to
a caller after a successful read.
Reviewers: manmanren, rsmith, doug.gregor
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D27580
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@289276 91177308-0d34-0410-b5e6-96231b3b80d8
PCH files store the macro history for a given macro, and the whole history list
for one identifier is given to the Preprocessor at once via
Preprocessor::setLoadedMacroDirective(). This contained an assert that no macro
history exists yet for that identifier. That's usually true, but it's not true
for builtin macros, which are created in Preprocessor() before flags and pchs
are processed. Luckily, ASTWriter stops writing macro history lists at builtins
(see shouldIgnoreMacro() in ASTWriter.cpp), so the head of the history list was
missing for builtin macros. So make the assert weaker, and splice the history
list to the existing single define for builtins.
https://reviews.llvm.org/D27545
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@289228 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the access qualifier to the Pipe Type, rather than using a class
hierarchy.
It also fixes mergeTypes for Pipes, by disallowing merges. Only identical
pipe types can be merged. The test case in invalid-pipes-cl2.0.cl is added
to check that.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@288332 91177308-0d34-0410-b5e6-96231b3b80d8
As proposed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2016-October/106595.html
This change also fixes an API oddity where BitstreamCursor::Read() would
return zero for the first read past the end of the bitstream, but would
report_fatal_error for subsequent reads. Now we always report_fatal_error
for all reads past the end. Updated clients to check for the end of the
bitstream before reading from it.
I also needed to add padding to the invalid bitcode tests in
test/Bitcode/. This is because the streaming interface was not checking that
the file size is a multiple of 4.
Differential Revision: https://reviews.llvm.org/D26219
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@285773 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r284176. It still marks some modules as invisible
that should be visible. Will follow up with the author with a test case.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@284382 91177308-0d34-0410-b5e6-96231b3b80d8
compiles without -fmodules-local-submodule-visibility. Original commit message:
[modules] When merging one definition into another, propagate the list of
re-exporting modules from the discarded definition to the retained definition.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@284176 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
These cause us to consider all functions in-between to be __host__
__device__.
You can nest these pragmas; you just can't have more 'end's than
'begin's.
Reviewers: rsmith
Subscribers: tra, jhen, cfe-commits
Differential Revision: https://reviews.llvm.org/D24975
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@283677 91177308-0d34-0410-b5e6-96231b3b80d8
We also need to add ObjCTypeParamTypeLoc. ObjCTypeParamType supports the
representation of "T <protocol>" where T is a type parameter. Before this,
we use TypedefType to represent the type parameter for ObjC.
ObjCTypeParamType has "ObjCTypeParamDecl *OTPDecl" and it extends from
ObjCProtocolQualifiers. It is a non-canonical type and is canonicalized
to the underlying type with the protocol qualifiers.
rdar://24619481
rdar://25060179
Differential Revision: http://reviews.llvm.org/D23079
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@281355 91177308-0d34-0410-b5e6-96231b3b80d8
There is a bug causing pch to be validated even though -fno-validate-pch is set. This patch fixes it.
ASTReader relies on ASTReaderListener to initialize SuggestedPredefines, which is required for compilations using PCH. Before this change, PCHValidator is the default ASTReaderListener. After this change, when -fno-validate-pch is set, PCHValidator is disabled, but we need a replacement ASTReaderListener to initialize SuggestedPredefines. Class SimpleASTReaderListener is implemented for this purpose.
This change only affects -fno-validate-pch. There is no functional change if -fno-validate-pch is not set.
If -fno-validate-pch is not set, conflicts in predefined macros between pch and current compiler instance causes error.
If -fno-validate-pch is set, predefine macros in current compiler override those in pch so that compilation can continue.
Differential Revision: https://reviews.llvm.org/D24054
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@280842 91177308-0d34-0410-b5e6-96231b3b80d8
In this mode, there is no need to load any module map and the programmer can
simply use "@import" syntax to load the module directly from a prebuilt
module path. When loading from prebuilt module path, we don't support
rebuilding of the module files and we ignore compatible configuration
mismatches.
rdar://27290316
Differential Revision: http://reviews.llvm.org/D23125
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@279096 91177308-0d34-0410-b5e6-96231b3b80d8
With PCH+Module, sometimes compiler gives a hard error:
Module file ‘<some-file path>.pcm' is out of date and needs to be rebuilt
This happens when we have a pch importing a module and the module gets
overwritten by another compiler instance after we build the pch (one example is
that both compiler instances hash to the same pcm file but use different
diagnostic options). When we try to load the pch later on, the compiler notices
that the imported module is out of date (modification date, size do not match)
but it can't handle this out of date pcm (i.e it does not know how to rebuild
the pch).
This commit introduces a new command line option so for PCH + module, we can
turn on this option and if two compiler instances only differ in diagnostic
options, the latter instance will not invalidate the original pcm.
rdar://26675801
Differential Revision: http://reviews.llvm.org/D22773
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@276769 91177308-0d34-0410-b5e6-96231b3b80d8
Processing update records (and loading a module, in general) might trigger
unexpected calls to the ASTWriter (being a mutation listener). Now we have a
mechanism to suppress those calls to the ASTWriter but notify other possible
mutation listeners.
Fixes https://llvm.org/bugs/show_bug.cgi?id=28332
Patch by Cristina Cristescu and me.
Reviewed by Richard Smith (D21800).
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@276473 91177308-0d34-0410-b5e6-96231b3b80d8
we first touch any part of that module. Instead, defer them until the first
time that module is (transitively) imported. The initializer step for a module
then recursively initializes modules that its own headers imported.
For example, this avoids running the <iostream> global initializer in programs
that don't actually use iostreams, but do use other parts of the standard
library.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@276159 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Space for storing the //constraint-expression// of the
//requires-clause// associated with a `TemplateParameterList` is
arranged by taking a bit out of the `NumParams` field for the purpose
of determining whether there is a //requires-clause// or not, and by
adding to the trailing objects tied to the `TemplateParameterList`. An
accessor is provided.
An appropriate argument is supplied to `TemplateParameterList::Create`
at the various call sites.
Serialization changes will addressed as the Concepts implementation
becomes more solid.
Drive-by fix:
This change also replaces the custom
`FixedSizeTemplateParameterListStorage` implementation with one that
follows the interface provided by `llvm::TrailingObjects`.
Reviewers: aaron.ballman, faisalv, rsmith
Subscribers: cfe-commits, nwilson
Differential Revision: https://reviews.llvm.org/D19322
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@276069 91177308-0d34-0410-b5e6-96231b3b80d8
passed on the command line but never actually used. We consider a (top-level)
module to be used if any part of it is imported, either by the current
translation unit, or by any part of a top-level module that is itself used.
(Put another way, a module is used if an implicit modules build would have
loaded its .pcm file.)
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@275481 91177308-0d34-0410-b5e6-96231b3b80d8
Otherwise there can be a crash with CFG analysis warnings doing work on invalid AST.
Fixes crash of rdar://26224134
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@275313 91177308-0d34-0410-b5e6-96231b3b80d8
On Linux, if the timestamp of a header file, included in the pch, is modified, then including the pch without regenerating it causes a fatal error, which is reasonable.
On Windows the check is ifdefed out, allowing the compilation to continue in a broken state.
The root of the broken state is that, if timestamps dont match, the preprocessor will reparse a header without discarding the pch data.
This leads to "#pragma once" header to be included twice.
The reason behind the ifdefing of the check lacks documentation, and was done 6 years ago.
This change tentatively removes the ifdefing.
First part of patch proposed at:
Differential Revision: http://reviews.llvm.org/D20867
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@275261 91177308-0d34-0410-b5e6-96231b3b80d8
ArrayRef is a little better than passing around a pointer/length
pair.
No functional change is intended.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@274732 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a __nth_element builtin that allows fetching the n-th type of a
parameter pack with very little compile-time overhead. The patch was inspired by
r252036 and r252115 by David Majnemer, which add a similar __make_integer_seq
builtin for efficiently creating a std::integer_sequence.
Reviewed as D15421. http://reviews.llvm.org/D15421
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@274316 91177308-0d34-0410-b5e6-96231b3b80d8
This is essential for iterating across macros properly, which LLDB does when
loading macros from modules. A naiver version of this patch (without the
conditional) caused assertion failures in the testsuite, but this version should
be safe.
Thanks to Ben Langmuir for the refinement that made this work.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@269554 91177308-0d34-0410-b5e6-96231b3b80d8
This patch corresponds to reviews:
http://reviews.llvm.org/D15120http://reviews.llvm.org/D19125
It adds support for the __float128 keyword, literals and target feature to
enable it. Based on the latter of the two aforementioned reviews, this feature
is enabled on Linux on i386/X86 as well as SystemZ.
This is also the second attempt in commiting this feature. The first attempt
did not enable it on required platforms which caused failures when compiling
type_traits with -std=gnu++11.
If you see failures with compiling this header on your platform after this
commit, it is likely that your platform needs to have this feature enabled.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@268898 91177308-0d34-0410-b5e6-96231b3b80d8
object in C. Rather than using the DeclContext (which is very slow because it
triggers us to build a lookup table for the DeclContext), use a separate map
from identifiers to decls for this case, containing only the ones we've
actually deserialized. For convenience, this map is implemented as an
IdentifierResolver.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@268817 91177308-0d34-0410-b5e6-96231b3b80d8
This commit fixes the IdentifierIterator to actually include identifiers
from a PCH or precompiled preamble when there is also a global module
index. This was causing code-completion (outside of C++) and
typo-correction to be missing global identifiers defined in the
PCH/preamble. Typo-correction has been broken since we first started
using the module index, whereas code-completion only started relying on
identifier iterator in r232793.
rdar://problem/25642879
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@268471 91177308-0d34-0410-b5e6-96231b3b80d8
a selector, the entry should be complete, containing everything introduced by
that module and all modules it imports.
Before writing out the method pool of a module, we sync up the out of date
selectors by pulling in methods for the selectors, from all modules it imports.
In ReadMethodPool, after pulling in the method pool entry for module A, this
lets us skip the modules that module A imports.
rdar://problem/25900131
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@268091 91177308-0d34-0410-b5e6-96231b3b80d8
PCH in a relative location had a redundant relative path on the DWO
filename and the DW_AT_compilation_dir.
This patch fixes this and adds testcases for PCH in the same directory,
in a relative, and an absolute location.
rdar://problem/25537947
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@267740 91177308-0d34-0410-b5e6-96231b3b80d8
Since this patch provided support for the __float128 type but disabled it
on all platforms by default, some platforms can't compile type_traits with
-std=gnu++11 since there is a specialization with __float128.
This reverts the patch until D19125 is approved (i.e. we know which platforms
need this support enabled).
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@266460 91177308-0d34-0410-b5e6-96231b3b80d8
a table entry in the corresponding decl, store an offset from the current
record to the relevant CXX_BASE_SPECIFIERS record. This results in fewer
indirections and a minor .pcm file size reduction.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@266266 91177308-0d34-0410-b5e6-96231b3b80d8
of a table entry in the corresponding decl, store an offset from the current
record to the relevant CXX_CTOR_INITIALIZERS record. This results in fewer
indirections and a minor .pcm file size reduction.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@266254 91177308-0d34-0410-b5e6-96231b3b80d8
This patch corresponds to review:
http://reviews.llvm.org/D15120
It adds support for the __float128 keyword, literals and a target feature to
enable it. This support is disabled by default on all targets and any target
that has support for this type is free to add it.
Based on feedback that I've received from target maintainers, this appears to
be the right thing for most targets. I have not heard from the maintainers of
X86 which I believe supports this type. I will subsequently investigate the
impact of enabling this on X86.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@266186 91177308-0d34-0410-b5e6-96231b3b80d8
Putting OpenCLImageTypes.def to clangAST library violates layering requirement: "It's not OK for a Basic/ header to include an AST/ header".
This fixes the modules build.
Differential revision: http://reviews.llvm.org/D18954
Reviewers: Richard Smith, Vassil Vassilev.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@266180 91177308-0d34-0410-b5e6-96231b3b80d8
I. Current implementation of images is not conformant to spec in the following points:
1. It makes no distinction with respect to access qualifiers and therefore allows to use images with different access type interchangeably. The following code would compile just fine:
void write_image(write_only image2d_t img);
kernel void foo(read_only image2d_t img) { write_image(img); } // Accepted code
which is disallowed according to s6.13.14.
2. It discards access qualifier on generated code, which leads to generated code for the above example:
call void @write_image(%opencl.image2d_t* %img);
In OpenCL2.0 however we can have different calls into write_image with read_only and wite_only images.
Also generally following compiler steps have no easy way to take different path depending on the image access: linking to the right implementation of image types, performing IR opts and backend codegen differently.
3. Image types are language keywords and can't be redeclared s6.1.9, which can happen currently as they are just typedef names.
4. Default access qualifier read_only is to be added if not provided explicitly.
II. This patch corrects the above points as follows:
1. All images are encapsulated into a separate .def file that is inserted in different points where image handling is required. This avoid a lot of code repetition as all images are handled the same way in the code with no distinction of their exact type.
2. The Cartesian product of image types and image access qualifiers is added to the builtin types. This simplifies a lot handling of access type mismatch as no operations are allowed by default on distinct Builtin types. Also spec intended access qualifier as special type qualifier that are combined with an image type to form a distinct type (see statement above - images can't be created w/o access qualifiers).
3. Improves testing of images in Clang.
Author: Anastasia Stulova
Reviewers: bader, mgrang.
Subscribers: pxli168, pekka.jaaskelainen, yaxunl.
Differential Revision: http://reviews.llvm.org/D17821
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@265783 91177308-0d34-0410-b5e6-96231b3b80d8
explicitly provided, and the module map lists a header that does not exist,
unmark the module as 'unavailable' when loading its .pcm file. (Use of the
module might still fail if the relevant headers aren't embedded, but this
behavior is now consistent with how we behave if the module map is not
provided, and with the desired behavior for embedding headers in modules.)
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@264664 91177308-0d34-0410-b5e6-96231b3b80d8
bit from the top bit to the bottom bit, so that we don't need 6 VBR6 hunks for
each macro location. Reduces libstdc++ module size by about 1%.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@264540 91177308-0d34-0410-b5e6-96231b3b80d8
non-deterministic diagnostics (and non-deterministic PCH files). Check these
when building a module rather than serializing it; it's not reasonable for a
module's use to be satisfied by a definition in the user of the module.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@264466 91177308-0d34-0410-b5e6-96231b3b80d8
pragma ms_struct has an effect on struct decls, and the effect is serialized
correctly already. But the "is ms_struct currently on" state wasn't before
this change.
This uses the same approach as `pragma clang optimize`: When writing a module,
the state isn't serialized, only when writing a pch file.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@262539 91177308-0d34-0410-b5e6-96231b3b80d8
to allow arbitrary data to be associated with a parameter.
Also, fix a bug where we apparently haven't been serializing
this information for the last N years.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@262278 91177308-0d34-0410-b5e6-96231b3b80d8
If we didn't tell ReadOptionsBlock to allow failures then we can't
assume that the stream is not in the middle of a block if it returns
out-of-date. This was causing a crash when we tried to continue reading.
Also, it's just generally a good idea to early-exit if we're doing
implicit module builds, since we will want to immediately rebuild this
module anyway and there's no reason to waste time continuing after
failure.
rdar://problem/24114938
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@260563 91177308-0d34-0410-b5e6-96231b3b80d8
Update the Preprocessor's VisibleModuleSet when typo-correction creates
an implicit module import so that we won't accidentally write an invalid
SourceLocation into the preamble AST. This would later lead to infinite
recursion when loading the preamble AST because we use the value in
ImportLocs to prevent visiting a module twice.
rdar://problem/24440990
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@260543 91177308-0d34-0410-b5e6-96231b3b80d8
call in one more place to reduce the size of identifier tables in non-leaf
modules. No behavior change.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@259866 91177308-0d34-0410-b5e6-96231b3b80d8
Per review feedback the name was wrong and it can be used outside
Objective-C.
Unfortunately, making the internal struct visible broke some ASTMatchers
tests that assumed that the first record decl would be from user code,
rather than a builtin type. I'm worried that this will also affect
users' code. So this patch adds a typedef to wrap the internal struct
and only makes the typedef visible to namelookup. This is sufficient to
allow the ASTReader to merge the decls we need without making the struct
itself visible.
rdar://problem/24425801
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@259734 91177308-0d34-0410-b5e6-96231b3b80d8
Original message:
Make CF constant string decl visible to name lookup to fix module errors
The return type of the __builtin___*StringMakeConstantString functions
is a pointer to a struct, so we need that struct to be visible to name
lookup so that we will correctly merge multiple declarations of that
type if they come from different modules.
Incidentally, to make this visible to name lookup we need to rename the
type to __NSConstantString, since the real NSConstantString is an
Objective-C interface type. This shouldn't affect anyone outside the
compiler since users of the constant string builtins cast the result
immediately to CFStringRef.
Since this struct type is otherwise implicitly created by the AST
context and cannot access namelookup, we make this a predefined type
and initialize it in Sema.
Note: this issue of builtins that refer to types not visible to name
lookup technically also affects other builtins (e.g. objc_msgSendSuper),
but in all other cases the builtin is a library builtin and the issue
goes away if you include the library that defines the types it uses,
unlike for these constant string builtins.
rdar://problem/24425801
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@259721 91177308-0d34-0410-b5e6-96231b3b80d8
This breaks some internal bots in stage2: clang seg fault.
Looking with Ben to see what is going on.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@259715 91177308-0d34-0410-b5e6-96231b3b80d8
The return type of the __builtin___*StringMakeConstantString functions
is a pointer to a struct, so we need that struct to be visible to name
lookup so that we will correctly merge multiple declarations of that
type if they come from different modules.
Incidentally, to make this visible to name lookup we need to rename the
type to __NSConstantString, since the real NSConstantString is an
Objective-C interface type. This shouldn't affect anyone outside the
compiler since users of the constant string builtins cast the result
immediately to CFStringRef.
Since this struct type is otherwise implicitly created by the AST
context and cannot access namelookup, we make this a predefined type
and initialize it in Sema.
Note: this issue of builtins that refer to types not visible to name
lookup technically also affects other builtins (e.g. objc_msgSendSuper),
but in all other cases the builtin is a library builtin and the issue
goes away if you include the library that defines the types it uses,
unlike for these constant string builtins.
rdar://problem/24425801
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@259624 91177308-0d34-0410-b5e6-96231b3b80d8
by stripping the path. Follow-up to r258555.
This is safe because only one PCH per CU is currently supported for
module debugging.
rdar://problem/24301262
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@258582 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Support for OpenCL 2.0 pipe type.
This is a bug-fix version for bader's patch reviews.llvm.org/D14441
Reviewers: pekka.jaaskelainen, Anastasia
Subscribers: bader, Anastasia, cfe-commits
Differential Revision: http://reviews.llvm.org/D15603
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@257254 91177308-0d34-0410-b5e6-96231b3b80d8
This patch attempts to fix the regressions identified when the patch was committed initially.
Thanks to Michael Liao for identifying the fix in the offloading metadata generation
related with side effects in evaluation of function arguments.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@256933 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In order to offloading work properly two things need to be in place:
- a descriptor with all the offloading information (device entry functions, and global variable) has to be created by the host and registered in the OpenMP offloading runtime library.
- all the device functions need to be emitted for the device and a convention has to be in place so that the runtime library can easily map the host ID of an entry point with the actual function in the device.
This patch adds support for these two things. However, only entry functions are being registered given that 'declare target' directive is not yet implemented.
About offloading descriptor:
The details of the descriptor are explained with more detail in http://goo.gl/L1rnKJ. Basically the descriptor will have fields that specify the number of devices, the pointers to where the device images begin and end (that will be defined by the linker), and also pointers to a the begin and end of table whose entries contain information about a specific entry point. Each entry has the type:
```
struct __tgt_offload_entry{
void *addr;
char *name;
int64_t size;
};
```
and will be implemented in a pre determined (ELF) section `.omp_offloading.entries` with 1-byte alignment, so that when all the objects are linked, the table is in that section with no padding in between entries (will be like a C array). The code generation ensures that all `__tgt_offload_entry` entries are emitted in the same order for both host and device so that the runtime can have the corresponding entries in both host and device in same index of the table, and efficiently implement the mapping.
The resulting descriptor is registered/unregistered with the runtime library using the calls `__tgt_register_lib` and `__tgt_unregister_lib`. The registration is implemented in a high priority global initializer so that the registration happens always before any initializer (that can potentially include target regions) is run.
The driver flag -omptargets= was created to specify a comma separated list of devices the user wants to support so that the new functionality can be exercised. Each device is specified with its triple.
About target codegen:
The target codegen is pretty much straightforward as it reuses completely the logic of the host version for the same target region. The tricky part is to identify the meaningful target regions in the device side. Unlike other programming models, like CUDA, there are no already outlined functions with attributes that mark what should be emitted or not. So, the information on what to emit is passed in the form of metadata in host bc file. This requires a new option to pass the host bc to the device frontend. Then everything is similar to what happens in CUDA: the global declarations emission is intercepted to check to see if it is an "interesting" declaration. The difference is that instead of checking an attribute, the metadata information in checked. Right now, there is only a form of metadata to pass information about the device entry points (target regions). A class `OffloadEntriesInfoManagerTy` was created to manage all the information and queries related with the metadata. The metadata looks like this:
```
!omp_offload.info = !{!0, !1, !2, !3, !4, !5, !6}
!0 = !{i32 0, i32 52, i32 77426347, !"_ZN2S12r1Ei", i32 479, i32 13, i32 4}
!1 = !{i32 0, i32 52, i32 77426347, !"_ZL7fstatici", i32 461, i32 11, i32 5}
!2 = !{i32 0, i32 52, i32 77426347, !"_Z9ftemplateIiET_i", i32 444, i32 11, i32 6}
!3 = !{i32 0, i32 52, i32 77426347, !"_Z3fooi", i32 99, i32 11, i32 0}
!4 = !{i32 0, i32 52, i32 77426347, !"_Z3fooi", i32 272, i32 11, i32 3}
!5 = !{i32 0, i32 52, i32 77426347, !"_Z3fooi", i32 127, i32 11, i32 1}
!6 = !{i32 0, i32 52, i32 77426347, !"_Z3fooi", i32 159, i32 11, i32 2}
```
The fields in each metadata entry are (in sequence):
Entry 1) an ID of the type of metadata - right now only zero is used meaning "OpenMP target region".
Entry 2) a unique ID of the device where the input source file that contain the target region lives.
Entry 3) a unique ID of the file where the input source file that contain the target region lives.
Entry 4) a mangled name of the function that encloses the target region.
Entries 5) and 6) line and column number where the target region was found.
Entry 7) is the order the entry was emitted.
Entry 2) and 3) are required to distinguish files that have the same function name.
Entry 4) is required to distinguish different instances of the same declaration (usually templated ones)
Entries 5) and 6) are required to distinguish the particular target region in body of the function (it is possible that a given target region is not an entry point - if clause can evaluate always to zero - and therefore we need to identify the "interesting" target regions. )
This patch replaces http://reviews.llvm.org/D12306.
Reviewers: ABataev, hfinkel, tra, rjmccall, sfantao
Subscribers: FBrygidyn, piotr.rak, Hahnfeld, cfe-commits
Differential Revision: http://reviews.llvm.org/D12614
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@256842 91177308-0d34-0410-b5e6-96231b3b80d8
than reusing the "overridden buffer" mechanism. This will allow us to make
embedded files and overridden files behave differently in future.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@254121 91177308-0d34-0410-b5e6-96231b3b80d8
https://gcc.gnu.org/onlinedocs/gcc/Typeof.html
Differences from the GCC extension:
* __auto_type is also permitted in C++ (but only in places where
it could appear in C), allowing its use in headers that might
be shared across C and C++, or used from C++98
* __auto_type can be combined with a declarator, as with C++ auto
(for instance, "__auto_type *p")
* multiple variables can be declared in a single __auto_type
declaration, with the C++ semantics (the deduced type must be
the same in each case)
This patch also adds a missing restriction on applying typeof to
a bit-field, which GCC has historically rejected in C (due to
lack of clarity as to whether the operand should be promoted).
The same restriction also applies to __auto_type in C (in both
GCC and Clang).
This also fixes PR25449.
Patch by Nicholas Allegra!
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@252690 91177308-0d34-0410-b5e6-96231b3b80d8
we can't load that file due to a configuration mismatch, and implicit module
building is disabled, and the user turns off the error-by-default warning for
that situation, then fall back to textual inclusion for the module rather than
giving an error if any of its headers are included.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@252114 91177308-0d34-0410-b5e6-96231b3b80d8
This new builtin template allows for incredibly fast instantiations of
templates like std::integer_sequence.
Performance numbers follow:
My work station has 64 GB of ram + 20 Xeon Cores at 2.8 GHz.
__make_integer_seq<std::integer_sequence, int, 90000> takes 0.25
seconds.
std::make_integer_sequence<int, 90000> takes unbound time, it is still
running. Clang is consuming gigabytes of memory.
Differential Revision: http://reviews.llvm.org/D13786
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@252036 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce the notion of a module file extension, which introduces
additional information into a module file at the time it is built that
can then be queried when the module file is read. Module file
extensions are identified by a block name (which must be unique to the
extension) and can write any bitstream records into their own
extension block within the module file. When a module file is loaded,
any extension blocks are matched up with module file extension
readers, that are per-module-file and are given access to the input
bitstream.
Note that module file extensions can only be introduced by
programmatic clients that have access to the CompilerInvocation. There
is only one such extension at the moment, which is used for testing
the module file extension harness. As a future direction, one could
imagine allowing the plugin mechanism to introduce new module file
extensions.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@251955 91177308-0d34-0410-b5e6-96231b3b80d8
Use the *current* state of "is-moduleness" rather than the state at
serialization time so that if we read a builtin identifier from a module
that wasn't "interesting" to that module, we will still write it out to
a PCH that imports that module.
Otherwise, we would get mysterious "unknown builtin" errors when using
PCH+modules.
rdar://problem/23287656
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@251565 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change adds support for `__builtin_ms_va_list`, a GCC extension for
variadic `ms_abi` functions. The existing `__builtin_va_list` support is
inadequate for this because `va_list` is defined differently in the Win64
ABI vs. the System V/AMD64 ABI.
Depends on D1622.
Reviewers: rsmith, rnk, rjmccall
CC: cfe-commits
Differential Revision: http://reviews.llvm.org/D1623
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@247941 91177308-0d34-0410-b5e6-96231b3b80d8
them directly to the control block. These are fairly large, and in a build with
lots of modules / chained PCH, we don't need to read most of them. No
functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@247055 91177308-0d34-0410-b5e6-96231b3b80d8
r246546, with a workaround for an MSVC 2013 miscompile and an MSVC 2015
rejects-valid.
Original commit message:
[modules] Rework serialized DeclContext lookup table management. Instead of
walking the loaded ModuleFiles looking for lookup tables for the context, store
them all in one place, and merge them together if we find we have too many
(currently, more than 4). If we do merge, include the merged form in our
serialized lookup table, so that downstream readers never need to look at our
imports' tables.
This gives a huge performance improvement to builds with very large numbers of
modules (in some cases, more than a 2x speedup was observed).
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@246582 91177308-0d34-0410-b5e6-96231b3b80d8
predictable diagnostic experience. The hash-of-DeclID order we were using
before gave different results on Win32 due to a different predefined
declaration of __builtin_va_list.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@246521 91177308-0d34-0410-b5e6-96231b3b80d8
walking the loaded ModuleFiles looking for lookup tables for the context, store
them all in one place, and merge them together if we find we have too many
(currently, more than 4). If we do merge, include the merged form in our
serialized lookup table, so that downstream readers never need to look at our
imports' tables.
This gives a huge performance improvement to builds with very large numbers of
modules (in some cases, more than a 2x speedup was observed).
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@246497 91177308-0d34-0410-b5e6-96231b3b80d8
DeclarationName (because all ctor names are considered the same, and so on).
Reflect this in the type used as the lookup table key. As a side-effect, remove
one copy of the duplicated code used to compute the hash of the key.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@246124 91177308-0d34-0410-b5e6-96231b3b80d8
Adds parsing/sema analysis/serialization/deserialization for array sections in OpenMP constructs (introduced in OpenMP 4.0).
Currently it is allowed to use array sections only in OpenMP clauses that accepts list of expressions.
Differential Revision: http://reviews.llvm.org/D10732
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@245937 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of eagerly deserializing a list of DeclIDs when we load a module file
and doing a binary search to find the redeclarations of a decl, store a list of
redeclarations of each chain before the first declaration and load it directly.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@245789 91177308-0d34-0410-b5e6-96231b3b80d8
all modules and reduce the number of declarations we load when loading a
redeclaration chain.
The new approach is:
* when loading the first declaration of an entity within a module file, we
first load all declarations of the entity that were imported into that
module file, and then load all the other declarations of that entity from
that module file and build a suitable decl chain from them
* when loading any other declaration of an entity, we first load the first
declaration from the same module file
As before, we complete redecl chains through name lookup where necessary.
To make this work, I also had to change the way that template specializations
are stored -- it no longer suffices to track only canonical specializations; we
now emit all "first local" declarations when emitting a list of specializations
for a template.
On one testcase with several thousand imported module files, this reduces the
total runtime by 72%.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@245779 91177308-0d34-0410-b5e6-96231b3b80d8
non-visible definition, skip the new definition to avoid ending up with a
function with multiple definitions.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@245664 91177308-0d34-0410-b5e6-96231b3b80d8
file in the .pcm files. This allows a smaller set of files to be sent to a
remote build worker when building with explicit modules (for instance, module
map files need not be sent along with the corresponding precompiled modules).
This doesn't actually make the embedded files visible to header search, so
it's not useful as a packaging format for public header files.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@245028 91177308-0d34-0410-b5e6-96231b3b80d8
files: include the .pcm file itself in the .d output, rather than including its
own input files. Other forms of module file continue to be transparent for .d
output.
Arguably, the input files for the .pcm file are still inputs to the
compilation, but that's unnecessary for make-like build systems (where the
mtime of the .pcm file is sufficient) and harmful for smarter build systems
that know about module files and want to track only the local dependencies.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@244923 91177308-0d34-0410-b5e6-96231b3b80d8
emit lexical contents for a declaration for another module. Track which module
those contents came from, and ensure that we only grab the lexical contents
from a single such instantiation.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@244682 91177308-0d34-0410-b5e6-96231b3b80d8
arguments because the reloaded form might have become non-canonical across the
serialization/deserialization step (this particularly happens when the
canonical form of the type involves an expression).
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@244409 91177308-0d34-0410-b5e6-96231b3b80d8
determine the primary context, rather than sometimes registering the lookup
table on the wrong context.
This exposed a couple of bugs:
* the odr violation check didn't deal properly with mergeable declarations
if the declaration retained by name lookup wasn't in the canonical
definition of the class
* the (broken) RewriteDecl mechanism would emit two name lookup tables for
the same DeclContext into the same module file (one as part of the
rewritten declaration and one as a visible update for the old declaration)
These are both fixed too.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@244192 91177308-0d34-0410-b5e6-96231b3b80d8
useless return value. Switch to using it directly when completing the
redeclaration chain for an anonymous declaration, and reduce the set of
declarations that we load in the process to just those of the right kind.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@244161 91177308-0d34-0410-b5e6-96231b3b80d8
In llvm commit r243581, a reverse range adapter was added which allows
us to change code such as
for (auto I = Fields.rbegin(), E = Fields.rend(); I != E; ++I) {
in to
for (const FieldDecl *I : llvm::reverse(Fields))
This commit changes a few of the places in clang which are eligible to use
this new adapter.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@243663 91177308-0d34-0410-b5e6-96231b3b80d8
chain and fix the cases where it fires.
* Handle the __va_list_tag as a predefined decl. Previously we failed to merge
sometimes it because it's not visible to name lookup. (In passing, remove
redundant __va_list_tag typedefs that we were creating for some ABIs. These
didn't affect the mangling or representation of the type.)
* For Decls derived from Redeclarable that are not in fact redeclarable
(implicit params, function params, ObjC type parameters), remove them from
the list of expected redeclarable decls.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@243259 91177308-0d34-0410-b5e6-96231b3b80d8
the identifier table. This is redundant, since the TU-scope lookups are also
serialized as part of the TU DeclContext, and wasteful in a number of ways. We
still emit the decls for PCH / preamble builds, since for those we want
identical results, not merely semantically equivalent ones.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@242855 91177308-0d34-0410-b5e6-96231b3b80d8
to be interesting just because they are the name of a builtin. Reduces the size
of an empty module by over 80% (~100KB).
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@242650 91177308-0d34-0410-b5e6-96231b3b80d8
flag to change between serialization and deserialization, so it does not
require the identifier to be serialized.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@242567 91177308-0d34-0410-b5e6-96231b3b80d8
- introduces a new cc1 option -fmodule-format=[raw,obj]
with 'raw' being the default
- supports arbitrary module container formats that libclang is agnostic to
- adds the format to the module hash to avoid collisions
- splits the old PCHContainerOperations into PCHContainerWriter and
a PCHContainerReader.
Thanks to Richard Smith for reviewing this patch!
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@242499 91177308-0d34-0410-b5e6-96231b3b80d8
before the first imported declaration.
We don't need to track all formerly-canonical declarations of an entity; it's sufficient to track those ones for which no other formerly-canonical declaration was imported into the same module. We call those ones "key declarations", and use them as our starting points for collecting redeclarations and performing namespace lookups.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@241999 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds ObjectFilePCHContainerOperations uses the LLVM backend
to put the contents of a PCH into a __clangast section inside a COFF, ELF,
or Mach-O object file container.
This is done to facilitate module debugging by makeing it possible to
store the debug info for the types defined by a module alongside the AST.
rdar://problem/20091852
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@241620 91177308-0d34-0410-b5e6-96231b3b80d8
The __kindof type qualifier can be applied to Objective-C object
(pointer) types to indicate id-like behavior, which includes implicit
"downcasting" of __kindof types to subclasses and id-like message-send
behavior. __kindof types provide better type bounds for substitutions
into unspecified generic types, which preserves more type information.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@241548 91177308-0d34-0410-b5e6-96231b3b80d8
Objective-C type arguments can be provided in angle brackets following
an Objective-C interface type. Syntactically, this is the same
position as one would provide protocol qualifiers (e.g.,
id<NSCopying>), so parse both together and let Sema sort out the
ambiguous cases. This applies both when parsing types and when parsing
the superclass of an Objective-C class, which can now be a specialized
type (e.g., NSMutableArray<T> inherits from NSArray<T>).
Check Objective-C type arguments against the type parameters of the
corresponding class. Verify the length of the type argument list and
that each type argument satisfies the corresponding bound.
Specializations of parameterized Objective-C classes are represented
in the type system as distinct types. Both specialized types (e.g.,
NSArray<NSString *> *) and unspecialized types (NSArray *) are
represented, separately.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@241542 91177308-0d34-0410-b5e6-96231b3b80d8
abstracts the commonalities between modules and PCH files that are
needed to emit debug info for a module or precompiled header.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@241083 91177308-0d34-0410-b5e6-96231b3b80d8
Any extra features from -fmodule-feature are part of the module hash and
need to get validated on load. Also print them with -module-file-info.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@240433 91177308-0d34-0410-b5e6-96231b3b80d8
The patch is generated using this command:
$ tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
work/llvm/tools/clang
To reduce churn, not touching namespaces spanning less than 10 lines.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@240270 91177308-0d34-0410-b5e6-96231b3b80d8
This is a better approach to fixing the undefined behaviour I tried to
fix in r240228. This data doesn't necessarily have suitable alignment
for uint64_t, so use unaligned_uint64_t instead.
This fixes 225 test failures when clang is built with ubsan.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@240247 91177308-0d34-0410-b5e6-96231b3b80d8
We can do this better by changing the type to unaligned_uint64_t and
paying the cost on use instead of up front.
This reverts r240228
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@240246 91177308-0d34-0410-b5e6-96231b3b80d8
We interpret Blob as an array of uint64_t here, but there's no reason
to think that it has suitable alignment. Instead, read the data in in
an alignment-safe way and store it in a std::vector.
This fixes 225 test failures when clang is built with ubsan.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@240228 91177308-0d34-0410-b5e6-96231b3b80d8
A PCHContainerOperations abstract interface provides operations for
creating and unwrapping containers for serialized ASTs (precompiled
headers and clang modules). The default implementation is
RawPCHContainerOperations, which uses a flat file for the output.
The main application for this interface will be an
ObjectFilePCHContainerOperations implementation that uses LLVM to
wrap the module in an ELF/Mach-O/COFF container to store debug info
alongside the AST.
rdar://problem/20091852
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@240225 91177308-0d34-0410-b5e6-96231b3b80d8
If the type isn't trivially moveable emplace can skip a potentially
expensive move. It also saves a couple of characters.
Call sites were found with the ASTMatcher + some semi-automated cleanup.
memberCallExpr(
argumentCountIs(1), callee(methodDecl(hasName("push_back"))),
on(hasType(recordDecl(has(namedDecl(hasName("emplace_back")))))),
hasArgument(0, bindTemporaryExpr(
hasType(recordDecl(hasNonTrivialDestructor())),
has(constructExpr()))),
unless(isInTemplateInstantiation()))
No functional change intended.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@238601 91177308-0d34-0410-b5e6-96231b3b80d8
Skip imports when we know that we do not need to visit any imports
because we've already deserialized the redecls from a module.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@237782 91177308-0d34-0410-b5e6-96231b3b80d8
Emit warning when operand to `delete` is allocated with `new[]` or
operand to `delete[]` is allocated with `new`.
rev 2 update:
`getNewExprFromInitListOrExpr` should return `dyn_cast_or_null`
instead of `dyn_cast`, since `E` might be null.
Reviewers: rtrieu, jordan_rose, rsmith
Subscribers: majnemer, cfe-commits
Differential Revision: http://reviews.llvm.org/D4661
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@237608 91177308-0d34-0410-b5e6-96231b3b80d8
With this change, enabling -fmodules-local-submodule-visibility results in name
visibility rules being applied to submodules of the current module in addition
to imported modules (that is, names no longer "leak" between submodules of the
same top-level module). This also makes it much safer to textually include a
non-modular library into a module: each submodule that textually includes that
library will get its own "copy" of that library, and so the library becomes
visible no matter which including submodule you import.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@237473 91177308-0d34-0410-b5e6-96231b3b80d8
Emit warning when operand to `delete` is allocated with `new[]` or
operand to `delete[]` is allocated with `new`.
Reviewers: rtrieu, jordan_rose, rsmith
Subscribers: majnemer, cfe-commits
Differential Revision: http://reviews.llvm.org/D4661
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@237368 91177308-0d34-0410-b5e6-96231b3b80d8
clang::MacroDefinition now models the currently-defined value of a macro. The
previous MacroDefinition type, which represented a record of a macro definition
directive for a detailed preprocessing record, is now called MacroDefinitionRecord.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@236400 91177308-0d34-0410-b5e6-96231b3b80d8
It has no place there; it's not a property of the Module, and it makes
restoring the visibility set when we leave a submodule more difficult.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@236300 91177308-0d34-0410-b5e6-96231b3b80d8
Modules builds fundamentally have a non-linear macro history. In the interest
of better source fidelity, represent the macro definition information
faithfully: we have a linear macro directive history within each module, and at
any point we have a unique "latest" local macro directive and a collection of
visible imported directives. This also removes the attendent complexity of
attempting to create a correct MacroDirective history (which we got wrong
in the general case).
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@236176 91177308-0d34-0410-b5e6-96231b3b80d8
Since we now track module macros separately from their visibility state, this
is no longer necessary.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@235648 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we'd defer this determination until writing the AST, which doesn't
allow us to use this information when building other submodules of the same
module. This change also allows us to use a uniform mechanism for writing
module macro records, independent of whether they are local or imported.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@235614 91177308-0d34-0410-b5e6-96231b3b80d8
Richard Trieu